2018+ Navigation in a 2017

[FR-S2GT86]

Originally Posted by G_Rossney

So I have a 2013 BRZ. I figured out the wiring to get the Non-Navi radio from a 2016 or 2017 to work. I have a 2019/2020 Navi Radio. I got it hooked up, everything seems to be working EXCEPT, the radio audio is missing the low end. I had this issue when I upgraded to the 2016/2017 Non-Navi radio, but when i moved the pins it worked.

Does anyone know where the issue is for the missing low end/bass and what I need to move to fix it. I've been looking at wiring diagrams.

Replied to your other post.

[G_Rossney]

Originally Posted by Grady

Yes it would work. You will just need to look at the 2014 wire diagram to verify pin assignments.

I don't believe the GPS antenna in the early models '13/'14 are compatible. Mine did not work. 1. Plugs are not the same, after swapping, it still did not work.

[Espi]

the thread ive been looking for!

If I dont want to retain the steering wheel pause button in the 17 can I just plug in a 18 Ts Radio with GPS antenna and call it a day?

Or is all this required to get the radio to work with GPS?

Thank you in advance.

[Grady]

Originally Posted by Espi

the thread ive been looking for!

If I dont want to retain the steering wheel pause button in the 17 can I just plug in a 18 Ts Radio with GPS antenna and call it a day?

Or is all this required to get the radio to work with GPS?

Thank you in advance.

You can but from what I remember some the steering wheel controls were incorrect. Not just losing the pause button.