BRZ/FR-S Strut Tower Brace - Any Interest? - Page 71 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

GrimmSpeed · 08-21-2013, 07:37 PM

Guys/Gals,

I wanted to give you all a little update. We have been processing payments as quickly as possible in the last 48 hours. We are about half way done! I want to thank you all for your patience, this is a pretty big task to get everyone's payment turned into a order and shipped out. By the end of the day tomorrow we should have everyone that has paid so far out the door.

We also have a very full PM box, and trust me, we are doing our best to get your PM's read and answered as quickly as possible, rest assured, we are NOT ignoring you!!

-Matt Homes

reyruiz191 · 08-21-2013, 07:41 PM

Got my tracking info! Can't wait until it gets here!

boredom.is.me · 08-21-2013, 09:08 PM

Quote:

Originally Posted by GrimmSpeed

Check your tracking number that you should have received and hopefully it's expected before the 25th!

Chase
Engineering

I waited to see if anything would show up, and well, nothing showed up.

CJB · 08-21-2013, 11:00 PM

Quote:

Originally Posted by GrimmSpeed

Guys/Gals,

I wanted to give you all a little update. We have been processing payments as quickly as possible in the last 48 hours. We are about half way done! I want to thank you all for your patience, this is a pretty big task to get everyone's payment turned into a order and shipped out. By the end of the day tomorrow we should have everyone that has paid so far out the door.

We also have a very full PM box, and trust me, we are doing our best to get your PM's read and answered as quickly as possible, rest assured, we are NOT ignoring you!!

-Matt Homes

I sent you both an email and a PM, hopefully you see one of them (or this) before you ship my order.

I processed my PayPal payment with the wrong ship to address. The CORRECT address was in the message, but I realized after sending it that the address in the "ship to" field was wrong.

I'd hate to have to deal with the carrier delivering it to my old address (although it would be my fault...).

cslntuee · 08-21-2013, 11:59 PM

Payment sent yesterday and not yet get any response. ><

Thanks.

SliverBrz · 08-22-2013, 12:21 AM

i think you guys need to show patience, there are a ton of orders. Printing and creating invoices, then packing and shipping does take time.

On top of that, they have their normal business and sales to take care of too.

just saying

Captain Snooze · 08-22-2013, 03:35 AM

Quote:

Originally Posted by s2d4

I am wearing red panties

You tease!!!!

BRZNutt · 08-22-2013, 08:57 AM

Mine is on the FedEx truck for delivery today! Probably not news worthy, but I am highly impressed with GrimmSpeed's handling of this entire group buy.

mrjester · 08-22-2013, 10:56 AM

Mine arrived, but I need batteries for my Torque wrench. :/

boredom.is.me · 08-22-2013, 10:58 AM

Quote:

Originally Posted by mrjester

Mine arrived, but I need batteries for my Torque wrench. :/

While you are at it, you should change the muffler bearing coolant.

GrimmSpeed · 08-22-2013, 11:46 AM

I want to thank everyone who was patiently waiting for a response from us via PM. Our PM's are back under control now, if you were waiting for an answer check your PM's right away.

-Matt Homes

Ny Brz · 08-22-2013, 03:39 PM

Quote:

Originally Posted by GrimmSpeed

Well, ZetaVI really stole my thunder here, but we wrapped up our install guides yesterday! You can check out the video below, as well as the pdf to see just how easy it is. I'll be making a few small changes to the pdf in the coming days, but this should get you started!

https://www.grimmspeed.com/install_g...ne_version.pdf

Matt Beenen
Engineering

Will you guys be including the sleeve an ties, or is that just the specific vendor who is supplying that. no big deal if not, just interested to know.

GrimmSpeed · 08-22-2013, 03:46 PM

Quote:

Originally Posted by Ny Brz

Will you guys be including the sleeve an ties, or is that just the specific vendor who is supplying that. no big deal if not, just interested to know.

We absolutely are including the sleeve and two zip ties, and recommend securing it using the method outlined in the video and the install guide. The sleeving is a perfect match to the sleeving on the high pressure fuel lines too! It's a nice finishing touch that I'm sure most will appreciate.

Chase
Engineering

Ny Brz · 08-22-2013, 03:52 PM

Thanks, Chase.

08-21-2013, 07:41 PM	#982
reyruiz191 Senior Member Join Date: Jun 2012 Drives: 2013 FRS Vortech Supercharged Location: San Antonio, Tx Posts: 219 Thanks: 52 Thanked 159 Times in 82 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Got my tracking info! Can't wait until it gets here! __________________ My Vortech Build http://www.ft86club.com/forums/showthread.php?t=34135

08-22-2013, 03:52 PM	#994
Ny Brz Hella Flush Join Date: Aug 2012 Drives: 2013 SWP BRZ Location: Yonkers, NY Posts: 1,090 Thanks: 170 Thanked 332 Times in 251 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	Thanks, Chase. __________________ Ny BRZ's Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone using the STi Flexible Strut Tower Brace?	ngabdala	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	45	08-15-2019 01:59 AM
F/S Beatrush Strut Tower Brace Type-2 $175	Dan-in-Japan	Brakes, Suspension, Chassis	2	02-24-2013 01:38 PM
FT-86 SpeedFactory Strut Tower Brace Review	F1point4	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	35	01-07-2013 04:31 AM
DIY - Strut Tower Brace - FT-86 SpeedFactory	F1point4	DIY (Do-It-Yourself) Guides	4	10-28-2012 04:30 PM

08-21-2013, 07:37 PM	#981
GrimmSpeed Join Date: Nov 2011 Drives: '13 BRZ, '12 WRX Location: Minneapolis, MN Posts: 1,676 Thanks: 271 Thanked 3,550 Times in 885 Posts Mentioned: 218 Post(s) Tagged: 4 Thread(s)	Guys/Gals, I wanted to give you all a little update. We have been processing payments as quickly as possible in the last 48 hours. We are about half way done! I want to thank you all for your patience, this is a pretty big task to get everyone's payment turned into a order and shipped out. By the end of the day tomorrow we should have everyone that has paid so far out the door. We also have a very full PM box, and trust me, we are doing our best to get your PM's read and answered as quickly as possible, rest assured, we are NOT ignoring you!! -Matt Homes

08-21-2013, 11:59 PM	#985
cslntuee Senior Member Join Date: Sep 2012 Drives: Subaru BRZ Limited Location: Lexington MA Posts: 962 Thanks: 604 Thanked 103 Times in 79 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Payment sent yesterday and not yet get any response. >< Thanks.

08-22-2013, 12:21 AM	#986
SliverBrz Senior Member Join Date: Apr 2013 Drives: Silver 2013 BRZ limited Location: Los angeles Posts: 801 Thanks: 45 Thanked 184 Times in 125 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	i think you guys need to show patience, there are a ton of orders. Printing and creating invoices, then packing and shipping does take time. On top of that, they have their normal business and sales to take care of too. just saying

08-22-2013, 11:46 AM	#991
GrimmSpeed Join Date: Nov 2011 Drives: '13 BRZ, '12 WRX Location: Minneapolis, MN Posts: 1,676 Thanks: 271 Thanked 3,550 Times in 885 Posts Mentioned: 218 Post(s) Tagged: 4 Thread(s)	I want to thank everyone who was patiently waiting for a response from us via PM. Our PM's are back under control now, if you were waiting for an answer check your PM's right away. -Matt Homes

User Name		Remember Me?
Password