2017 abs module on 16 down

[solidsnake11]

Censored

[chaoskaze]

Originally Posted by solidONE

FYI I have a lead on 17-19 ABS modules. If anyone wants, I'll pick up the next one for anyone looking here. My salvage guy seems to get a "brand new" totalled 86/brz to part out every week. A lot of dumbasses drive this car. (myself included)

Heyy @soildONE

Super late on this, but can you still help me get a updated ABS module?

Thanks!

*Im looking online as well, does it matter if the unit is from auto or manual?

[solidONE]

Originally Posted by chaoskaze

Heyy @soildONE

Super late on this, but can you still help me get a updated ABS module?

Thanks!

*Im looking online as well, does it matter if the unit is from auto or manual?

Check this thread. It should help you locate what you are looking for.

[Yoshoobaroo]

Originally Posted by solidONE

Check this thread. It should help you locate what you are looking for.

Yep. That thread has just about all the info you need for the swap.

Yes it matters what transmission the donor car is, it needs to match your car.

eBay is still the best place to find one, although pricing has gone up. Search for “BRZ ABS pump” and “86 ABS pump”. Most eBay sellers list the spec of the donor car so you can get the correct transmission.

417motoring usually has a decent selection: https://ebay.com/usr/417motoring

[chaoskaze]

Originally Posted by solidONE

Check this thread. It should help you locate what you are looking for.

Thanks i got one already. I still haven't install it yet.

[solidONE]

Originally Posted by chaoskaze

Thanks i got one already. I still haven't install it yet.

Enjoy!

[amirnew]

Originally Posted by solidONE

No DTCs popped up after install, no ABS light, nothing. Hill assist works and it takes 2.5 seconds to activate VDC Sport or now 'Track mode'.

to try to determine if the Sport mode has changed, I'll just try to slide it around a bit more and see how much it lets me do that before the computer starts to pulse the brakes. Too bad there is not a channel I can record that tells you when the TC is being applied.

Hi, used the same module as yours on mt 2013(sept 12 built) brz. But for me the speed sensor is dead. Someone has the scematicts of the vsc connectors?
I have cel that there is speed aensor fail... Pin27 someone....