2017+ BRZ/86 Steering wheel trim options - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RToyo86 · 08-28-2020, 09:22 AM

Does anybody know where to find aftermarket options?

I've been scouring for something to replace the silver. So far the only pieces I have found are for earlier model wheels.

ThatYeti · 08-28-2020, 09:40 AM

The JDM trim is all black and what most use to replace the silver unless you want to go with some kind of overlay and those are all over the place.

the new guy · 08-28-2020, 01:40 PM

Look up the VIN of the orange 2017/2018 86 edition 86. Thats the only USDM car that came with black steering wheel trim. Use that VIN on a parts site like parts-souq and you can get the part number. I have it somewhere, if I find it I’ll update this post or just find it again as I plan on doing the same.

Tokay444 · 08-28-2020, 01:58 PM

860*

wolffbite · 08-28-2020, 02:16 PM

No aftermarket options available to my knowledge.

You can get the OEM black version (special editions and I think Brz TS version is black too), but since it is only sold with the button assembly you will be paying $200+. Not worth it IMO.

I just vinyl wrapped it myself in matte black. Still looks good 2+ years later. You could paint it too, I just went vinyl in case I wanted to reverse it one day.

the new guy · 08-28-2020, 02:46 PM

860, yes correct.

Part number: SU003-07459

Ohio Enthusiast · 08-28-2020, 05:03 PM

I Plasti Dipped mine (together with the silver shifter surround and gloss black infotainment surround). Cost me two cans of black Dip (first time I used Plasti Dip, could have used just one if I knew what I was doing before hand), much cheaper than getting the JDM parts.

RToyo86 · 09-08-2020, 08:46 PM

Thanks for the info gents.

The only silver trim left in the car is on the wheel, and the rings around the vents. The rest is done in black suede to match the 86 black on the dash.

I'm decent with paint, I'm going to give vinyl paint a try first. I have little experience wrapping, I fear it would end in rage

that black looks subtle @wolffbite

the new guy · 09-08-2020, 08:56 PM

Quote:

Originally Posted by RToyo86

Thanks for the info gents.

The only silver trim left in the car is on the wheel, and the rings around the vents. The rest is done in black suede to match the 86 black on the dash.

I'm decent with paint, I'm going to give vinyl paint a try first. I have little experience wrapping, I fear it would end in rage

that black looks subtle @wolffbite

I peaked at your last pics, the suede is really nice! There’s black JDM door handles and the 860 edition also has a black traction control button too.

beltax90 · 09-08-2020, 09:02 PM

dont know how well this fits but it's an option! cover pieces using 3m double

https://www.ftspeed.com/part/fr-s-br...z#.X1gpcDvYqeE

RToyo86 · 09-09-2020, 06:57 AM

Quote:

Originally Posted by the new guy

I peaked at your last pics, the suede is really nice! There’s black JDM door handles and the 860 edition also has a black traction control button too.

I saw that, it's about $90 shipped through a Canadian supplier. I'm curious what the silver buttons will look like against the silver on the shift knob once everything else is black. Worst case it'll be the last thing I order.

I will have to do something with the silver rings around the door speakers too.

wolffbite · 09-09-2020, 11:06 AM

Quote:

Originally Posted by RToyo86

I saw that, it's about $90 shipped through a Canadian supplier. I'm curious what the silver buttons will look like against the silver on the shift knob once everything else is black. Worst case it'll be the last thing I order.

I will have to do something with the silver rings around the door speakers too.

I swapped silver to black on everything I could. Vent rings, door handles, shifter surround trim, e-brake button, traction buttons...

Only thing I haven't touched is the door speaker rings. If you figure out something for yours definitely post some pics!

RToyo86 · 09-09-2020, 12:33 PM

Quote:

Originally Posted by wolffbite

I swapped silver to black on everything I could. Vent rings, door handles, shifter surround trim, e-brake button, traction buttons...

Only thing I haven't touched is the door speaker rings. If you figure out something for yours definitely post some pics!

It looks like door speaker panel is removable from the door card. I don't see much in terms of replacement, but that at least means I can mask it off and paint it with the other trim at the same time.

I'll update if get around to it before winter.

tehShirt · 09-09-2020, 03:08 PM

Quote:

Originally Posted by RToyo86

It looks like door speaker panel is removable from the door card. I don't see much in terms of replacement, but that at least means I can mask it off and paint it with the other trim at the same time.

I'll update if get around to it before winter.

The silver ring is completely removable. If you remove the knee pad, the ring can be removed.

Some of the lower trim Japanese cars appear to have black rings for the speaker. I was not able to find a part number for it though.

08-28-2020, 09:22 AM	#1
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,168 Thanks: 1,709 Thanked 2,211 Times in 1,129 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	2017+ BRZ/86 Steering wheel trim options Does anybody know where to find aftermarket options? I've been scouring for something to replace the silver. So far the only pieces I have found are for earlier model wheels.

08-28-2020, 01:40 PM	#3
the new guy Senior Member Join Date: Oct 2013 Drives: 2014 Asphalt FR-S/2018 Thunder GT Location: Fairfax Posts: 618 Thanks: 199 Thanked 254 Times in 178 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Look up the VIN of the orange 2017/2018 86 edition 86. Thats the only USDM car that came with black steering wheel trim. Use that VIN on a parts site like parts-souq and you can get the part number. I have it somewhere, if I find it I’ll update this post or just find it again as I plan on doing the same. __________________ 2014 FRS: Sold 2018 Thunder GT: RCE Superstreet 1 Coilovers, HKS HI-POWER SPEC L CATBACK, WedsSport TC105n 18x8

08-28-2020, 02:46 PM	#6
the new guy Senior Member Join Date: Oct 2013 Drives: 2014 Asphalt FR-S/2018 Thunder GT Location: Fairfax Posts: 618 Thanks: 199 Thanked 254 Times in 178 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	860, yes correct. Part number: SU003-07459 __________________ 2014 FRS: Sold 2018 Thunder GT: RCE Superstreet 1 Coilovers, HKS HI-POWER SPEC L CATBACK, WedsSport TC105n 18x8

09-08-2020, 09:02 PM	#10
beltax90 Senior Member Join Date: Jan 2019 Drives: 2010 corolla Location: california Posts: 1,404 Thanks: 1,520 Thanked 1,798 Times in 780 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	dont know how well this fits but it's an option! cover pieces using 3m double https://www.ftspeed.com/part/fr-s-br...z#.X1gpcDvYqeE Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2017+ steering wheel/wrap options	Ohio Enthusiast	Cosmetic Modification (Interior/Exterior/Lighting)	19	08-27-2021 07:03 PM
2017+ Steering wheel trim/controls --- $50	Balf	Interior Parts (Incl. Lighting)	0	01-18-2020 04:41 PM
WTB: 2017+ steering wheel trim ring	Prodigalson	Want-To-Buy Requests	0	04-18-2019 07:55 AM
WTB: oem shifter trim, steering wheel trim, and door handle trim	frs_caskey	Want-To-Buy Requests	3	03-28-2017 05:38 PM
Blue carbon steering wheel and steering wheel trim... installed!	Pointmutation	Cosmetic Modification (Interior/Exterior/Lighting)	15	02-06-2017 11:20 PM

08-28-2020, 09:40 AM	#2
ThatYeti Senior Member Join Date: Aug 2019 Drives: BRZ Location: Connecticut Posts: 191 Thanks: 43 Thanked 25 Times in 23 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	The JDM trim is all black and what most use to replace the silver unless you want to go with some kind of overlay and those are all over the place.

08-28-2020, 01:58 PM	#4
Tokay444 Anti stance. Join Date: Feb 2016 Drives: 17 White 860. RCE Tarmac 2. RE-71RS Location: Not Canada Posts: 1,630 Thanks: 897 Thanked 958 Times in 547 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	860*

08-28-2020, 02:16 PM	#5
wolffbite Just the tip Join Date: Mar 2017 Drives: 2017 DGM BRZ Location: BC, CANADA Posts: 630 Thanks: 912 Thanked 875 Times in 376 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	No aftermarket options available to my knowledge. You can get the OEM black version (special editions and I think Brz TS version is black too), but since it is only sold with the button assembly you will be paying $200+. Not worth it IMO. I just vinyl wrapped it myself in matte black. Still looks good 2+ years later. You could paint it too, I just went vinyl in case I wanted to reverse it one day.

08-28-2020, 05:03 PM	#7
Ohio Enthusiast Senior Member Join Date: Apr 2020 Drives: 2018 BRZ Location: Dayton, OH Posts: 898 Thanks: 1,368 Thanked 764 Times in 433 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I Plasti Dipped mine (together with the silver shifter surround and gloss black infotainment surround). Cost me two cans of black Dip (first time I used Plasti Dip, could have used just one if I knew what I was doing before hand), much cheaper than getting the JDM parts.

09-08-2020, 08:46 PM	#8
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,168 Thanks: 1,709 Thanked 2,211 Times in 1,129 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Thanks for the info gents. The only silver trim left in the car is on the wheel, and the rings around the vents. The rest is done in black suede to match the 86 black on the dash. I'm decent with paint, I'm going to give vinyl paint a try first. I have little experience wrapping, I fear it would end in rage that black looks subtle @wolffbite

User Name		Remember Me?
Password