Random Thoughts - Part Deux [NO POLITICS]

[Spuds]

Originally Posted by NoHaveMSG

Alright I know we have some engineers here that may be able to help me. I need to call out a dimpled centering hole in a sheet metal part on a manufacturing drawing that uses a 3/8 threaded cone nut with a 82 degree taper.

Should it look like:
.441 Through
.525 X 82 degree

Haven't done any of that in 10 years...

We typically have people for that. Try google?

[NoHaveMSG]

Originally Posted by Spuds

Haven't done any of that in 10 years...

We typically have people for that. Try google?

Damnit, that is where I got what I came up with, just not sure about it. Our CAD guy doesn't know either.

[ichitaka05]

Looking into electric scooter to use for the weekend to visit my parents, cuz they're about 1.1miles away from the new house. So instead of driving my car, used the scooter to go there and back. But it's really hard to find the one I like.

Was looking at this one... but $1k is hard pill to swallow.


Another option is this one.

[Ultramaroon]

Originally Posted by NoHaveMSG

Damnit, that is where I got what I came up with, just not sure about it. Our CAD guy doesn't know either.

Do you mean a lug-centric hole callout? Not sure of the nomenclature but I can look through our standards library. I have an all-access pass to that stuff and know some peeps.

[NoHaveMSG]

Originally Posted by ichitaka05

Looking into electric scooter to use for the weekend to visit my parents, cuz they're about 1.1miles away from the new house. So instead of driving my car, used the scooter to go there and back. But it's really hard to find the one I like.

This one has a tofu basket.

https://www.amazon.com/Razor-EcoSmar...6537435&sr=8-5

[ichitaka05]

Originally Posted by NoHaveMSG

This one has a tofu basket.

https://www.amazon.com/Razor-EcoSmar...6537435&sr=8-5

Yeah, saw that one as well! It doesn't get mile from the charge, but it's not like I gonna do long drive or anything. It's in my Amazon wish list

[NoHaveMSG]

Originally Posted by Ultramaroon

Do you mean a lug-centric hole callout? Not sure of the nomenclature but I can look through our standards library. I have an all-access pass to that stuff and know some peeps.

Yes lug-centric, thank you.

[ls1ac]

In our area you have to have pedals or you have to get a plate.

[Ultramaroon]

Originally Posted by ichitaka05

Looking into electric scooter to use for the weekend to visit my parents, cuz they're about 1.1miles away from the new house. So instead of driving my car, used the scooter to go there and back. But it's really hard to find the one I like.

Don't you have a bicycle? A mile?


If you're set on a new toy, I suggest one with skinny tires for minimum rolling resistance.

[ichitaka05]

Originally Posted by Ultramaroon

Don't you have a bicycle? A mile?


If you're set on a new toy, I suggest one with skinny tires for minimum rolling resistance.

Nope, don't have a bicycle. Plus I'm too fat to pedal a bike

Originally Posted by ls1ac

In our area you have to have pedals or you have to get a plate.

In my area, doesn't require a plate... as long as it doesn't go 50 mph &/or engine is below 49cc

[Ultramaroon]

Originally Posted by NoHaveMSG

Yes lug-centric, thank you.

You were most of the way there. Vendor probably wouldn't have complained. This is just from Solidworks help doc but it's ANSI compliant.

[NoHaveMSG]

Originally Posted by Ultramaroon

You were most of the way there. Vendor probably wouldn't have complained. This is just from Solidworks help doc but it's ANSI compliant.

Thank you sir

[Ultramaroon]

Originally Posted by ichitaka05

Nope, don't have a bicycle. Plus I'm too fat to pedal a bike

Bullshit. Hand over your Asian card. I am disappoint.

[ichitaka05]

Originally Posted by Ultramaroon

Bullshit. Hand over your Asian card. I am disappoint.

Haha I haven't ride a bike over... 20 years.