follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Suspension | Chassis | Brakes -- Sponsored by 949 Racing

Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 01-19-2013, 12:41 AM   #1
ayau
Senior Member
 
Join Date: Nov 2011
Drives: Some rust bucket
Location: Polar ice cap
Posts: 3,058
Thanks: 312
Thanked 1,045 Times in 556 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Aerodynamics discussion

The purpose of this thread is to discuss the BRZ/FRS's aero.

The JDM underpanels help smooth out the air under the vehicle by making the underbody smoother. A smoother underbody means that there's less turbulence, thus decreasing drag. Theoretically, this can reduce wind noise, improve gas mileage, and increase top speed.

For reference, Subaru stated the following coefficient of drag (CD) statistics:
no underpanel, no wing: 0.29cd
no underpanel, with wing: 0.28cd
with underpanel, with wing: 0.27cd

Here's a picture of the JDM underpanel.


While reading about aero diffusers, it appears that the underpanels may have another benefit. That benefit is increased downforce. The reason I say may create additional downforce is because it depends on whether or not the rear diffuser is actually functional. In other words, the air at the back needs to increase in pressure/decrease in velocity in relation to the air underneath the vehicle.

When equipped with the underpanels, air can travel at a greater velocity because there's less turbulence. When the air reaches to the rear of the vehicle, a diffuser will can slowdown the air by "diffusing" it. Essentially, the vehicle is being pulled down due to the difference in air pressure. The video below explains how diffusers work.

[ame="http://www.youtube.com/watch?v=3DIJMLrGz8Q"]Diffuser - Explained - YouTube[/ame]

Here's a picture of the BRZ's rear diffuser.


From the picture above, it appears that the BRZ's rear diffuser has a small angle to increase air pressure/decrease in velocity. However, it's not clear whether or not it's functional in producing downforce.

Last edited by ayau; 01-19-2013 at 02:06 AM.
ayau is offline   Reply With Quote
The Following 2 Users Say Thank You to ayau For This Useful Post:
Bonburner (05-02-2018), Yoniyama (05-24-2014)
Old 01-19-2013, 09:35 AM   #2
breezy
Member
 
Join Date: Feb 2012
Drives: 1991 Eagle Talon TSi AWD
Location: Illinois
Posts: 11
Thanks: 0
Thanked 3 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Interesting topic!

At first glance, I think the panels are mainly there to reduce drag coefficient, evidenced by Subaru's findings, but by themselves don't constitute enough to produce noticeable downforce.

The car itself is high off the ground and a lack of side skirts would let lots of air from the side of the car rush into the bottom. Lends me to believe that the stock rear "diffuser" is a cosmetic feature more than a functional one.
breezy is offline   Reply With Quote
Old 01-19-2013, 01:50 PM   #3
Hanakuso
Senior Member
 
Join Date: Apr 2012
Drives: FR-S
Location: California
Posts: 1,956
Thanks: 294
Thanked 673 Times in 390 Posts
Mentioned: 11 Post(s)
Tagged: 2 Thread(s)
What I found interesting was the TRD Griffon uses the JDM underpanels in conjunction with there custom panels and diffuser. The mid section would probably be cheap while the CF diffuser would be expensive. Mid section actually looks easy enough for any shop to fab. Only thing that worries me about the mid section is that the diff might overheat without the proper air.

My guess is the underpanels would help reduce drag and help smooth air out for the diffuser to actually create downforce

Hanakuso is offline   Reply With Quote
Old 01-19-2013, 02:51 PM   #4
ayau
Senior Member
 
Join Date: Nov 2011
Drives: Some rust bucket
Location: Polar ice cap
Posts: 3,058
Thanks: 312
Thanked 1,045 Times in 556 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
I'm under the impression that any difference in pressure (air over the car vs under the car) will create some sort of downforce. The greater the pressure difference (the lower the car), the more downforce created.
ayau is offline   Reply With Quote
Old 01-19-2013, 02:55 PM   #5
ayau
Senior Member
 
Join Date: Nov 2011
Drives: Some rust bucket
Location: Polar ice cap
Posts: 3,058
Thanks: 312
Thanked 1,045 Times in 556 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Also, for those that like to install super wide sticky tires, you may want to consider the aerodynamics. Tires the poke out of the fenders will create turbulence. You can Google why you don't want turbulence around your vehicle.

There are two solutions that I can think of.
1) Use slimmer tires
2) Install wider fenders

Option #1 may not be feasible for the autox crowd due to modification restrictions. However, since autox doesn't usually exceed 40mph, the extra turbulence created is probably negligible.
ayau is offline   Reply With Quote
Old 01-19-2013, 02:59 PM   #6
ayau
Senior Member
 
Join Date: Nov 2011
Drives: Some rust bucket
Location: Polar ice cap
Posts: 3,058
Thanks: 312
Thanked 1,045 Times in 556 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Hanakuso View Post
What I found interesting was the TRD Griffon uses the JDM underpanels in conjunction with there custom panels and diffuser. The mid section would probably be cheap while the CF diffuser would be expensive. Mid section actually looks easy enough for any shop to fab. Only thing that worries me about the mid section is that the diff might overheat without the proper air.

My guess is the underpanels would help reduce drag and help smooth air out for the diffuser to actually create downforce

There's a small hole in the back. I think that may be where the differential gets cool air.
ayau is offline   Reply With Quote
Old 01-19-2013, 03:28 PM   #7
Ro_Ja
Senior Member
 
Join Date: Aug 2012
Drives: TOYOTA
Location: CA
Posts: 401
Thanks: 191
Thanked 225 Times in 134 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by ayau View Post
Also, for those that like to install super wide sticky tires, you may want to consider the aerodynamics. Tires the poke out of the fenders will create turbulence. You can Google why you don't want turbulence around your vehicle.

There are two solutions that I can think of.
1) Use slimmer tires
2) Install wider fenders

Option #1 may not be feasible for the autox crowd due to modification restrictions. However, since autox doesn't usually exceed 40mph, the extra turbulence created is probably negligible.
I think CSG_Mike brought that up in one of his posts. I think it would be interesting to see how much an aggressive wheel and tire package affects the aero of this car. I'd also be interested in finding out the balance between maximum tire grip while retaining (or even improving) the car's aerodynamic qualities.
Ro_Ja is offline   Reply With Quote
Old 01-19-2013, 05:09 PM   #8
fatoni
Senior Member
 
Join Date: Apr 2011
Drives: miata, mazdaspeed protege, ls430
Location: socal
Posts: 4,416
Thanks: 599
Thanked 1,442 Times in 787 Posts
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
with a car this slow, it is almost a guarantee that the advantage in mechanical grip gained from tire is more advantageous than whatever you are trying to accomplish with aero. downforce is drag no matter how you slice it. the net result might not always show that but thats because nobody is talking about lift. once you realize that an f1 car has a cd of 1.5-2.5 and a prius has a cd of .25, it becomes a little more apparent where the priorities are in performance cars.
fatoni is offline   Reply With Quote
Old 01-19-2013, 08:32 PM   #9
CSG Mike
 
CSG Mike's Avatar
 
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,522
Thanks: 8,911
Thanked 14,166 Times in 6,828 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
Quote:
Originally Posted by fatoni View Post
with a car this slow, it is almost a guarantee that the advantage in mechanical grip gained from tire is more advantageous than whatever you are trying to accomplish with aero. downforce is drag no matter how you slice it. the net result might not always show that but thats because nobody is talking about lift. once you realize that an f1 car has a cd of 1.5-2.5 and a prius has a cd of .25, it becomes a little more apparent where the priorities are in performance cars.
An F1 car also has a much MUCH greater amount of horsepower as well as something like... 8x our power to weight ratio.

You'd be surprised how much speed the car can carry through turns. Aero is a larger factor in this than most people think.

Crude example: I can take a high speed sweeper faster in our BRZ with 225 tires, than I can in my S2000, with aero, with 255 tires. The S2000 has more power, and similar weight.
CSG Mike is offline   Reply With Quote
The Following 2 Users Say Thank You to CSG Mike For This Useful Post:
hmong337 (10-30-2014), TommyW (05-02-2020)
Old 01-19-2013, 08:59 PM   #10
fatoni
Senior Member
 
Join Date: Apr 2011
Drives: miata, mazdaspeed protege, ls430
Location: socal
Posts: 4,416
Thanks: 599
Thanked 1,442 Times in 787 Posts
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by CSG Mike View Post
An F1 car also has a much MUCH greater amount of horsepower as well as something like... 8x our power to weight ratio.

You'd be surprised how much speed the car can carry through turns. Aero is a larger factor in this than most people think.

Crude example: I can take a high speed sweeper faster in our BRZ with 225 tires, than I can in my S2000, with aero, with 255 tires. The S2000 has more power, and similar weight.
i am not downplaying the importance of aero. if anything i know how significant it is since i ride road bikes. there is no better way to come to appreciate that than being your own engine. at speed you can tell that like eighty percent of your work goes into fighting the wind. i was simply saying that if i had to chose between sacrificing mechanical grip for a reduction in slipperiness, i would do it. especially with 200 hp.
fatoni is offline   Reply With Quote
Old 01-19-2013, 09:11 PM   #11
Rayme
The Answer
 
Rayme's Avatar
 
Join Date: Sep 2012
Drives: Mazda 2
Location: Moncton, NB
Posts: 1,233
Thanks: 488
Thanked 661 Times in 315 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
If it works anything like an airplane wing, a smooth underside means higher pressure air going by, as it is smooth, this would decrease the wind resistance and promote lift, not downforce.
__________________
Rayme is offline   Reply With Quote
Old 01-19-2013, 09:12 PM   #12
Dimman
Kuruma Otaku
 
Dimman's Avatar
 
Join Date: Dec 2009
Drives: Mk3 Supra with Semi-built 7MGTE
Location: Greater Vancouver (New West)
Posts: 6,854
Thanks: 2,398
Thanked 2,265 Times in 1,234 Posts
Mentioned: 78 Post(s)
Tagged: 2 Thread(s)
Garage
Quote:
Originally Posted by fatoni View Post
with a car this slow, it is almost a guarantee that the advantage in mechanical grip gained from tire is more advantageous than whatever you are trying to accomplish with aero. downforce is drag no matter how you slice it. the net result might not always show that but thats because nobody is talking about lift. once you realize that an f1 car has a cd of 1.5-2.5 and a prius has a cd of .25, it becomes a little more apparent where the priorities are in performance cars.
To have a proper discussion about aero we need to clear up a few things.

First, we're dealing with lift. 'Downforce' is negative lift. So until all aero enhancements are working together to create negative lift, there is zero downforce. Downforce and lift are not independent forces. You have coefficient of lift. Once it goes negative you get 'downforce'.

Second, drag and lift have a complicated relationship. Sometimes one can be adjusted without the other being affected. Sometimes not. The drag to neg lift ratio is referred to aero efficiency. So while an F1 car has high drag, it also has ludicrous downforce. But that doesn't mean that we can't modify to get both a lift AND drag reduction.
__________________


Because titanium.
Dimman is offline   Reply With Quote
The Following 8 Users Say Thank You to Dimman For This Useful Post:
Calum (01-20-2013), DAEMANO (07-06-2014), ImAwesome (02-14-2013), Overdrive (08-01-2017), Racecomp Engineering (01-19-2013), shrike92 (01-23-2013), Ultramaroon (10-30-2014), Xanatos (01-22-2013)
Old 01-19-2013, 10:19 PM   #13
CSG Mike
 
CSG Mike's Avatar
 
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,522
Thanks: 8,911
Thanked 14,166 Times in 6,828 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
Quote:
Originally Posted by fatoni View Post
i am not downplaying the importance of aero. if anything i know how significant it is since i ride road bikes. there is no better way to come to appreciate that than being your own engine. at speed you can tell that like eighty percent of your work goes into fighting the wind. i was simply saying that if i had to chose between sacrificing mechanical grip for a reduction in slipperiness, i would do it. especially with 200 hp.
What we've found in our testing is that additional mechanical grip generally is wasted, when you're already WOT (which is a LOT with this car).

For an extreme example, would you rather have 225 or 285 tires on a Miata? For a more realistic one, 225 vs 255? 195 vs 225? Of course it all depends on the situation...
CSG Mike is offline   Reply With Quote
Old 01-19-2013, 11:40 PM   #14
fatoni
Senior Member
 
Join Date: Apr 2011
Drives: miata, mazdaspeed protege, ls430
Location: socal
Posts: 4,416
Thanks: 599
Thanked 1,442 Times in 787 Posts
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Dimman View Post
To have a proper discussion about aero we need to clear up a few things.

First, we're dealing with lift. 'Downforce' is negative lift. So until all aero enhancements are working together to create negative lift, there is zero downforce. Downforce and lift are not independent forces. You have coefficient of lift. Once it goes negative you get 'downforce'.

Second, drag and lift have a complicated relationship. Sometimes one can be adjusted without the other being affected. Sometimes not. The drag to neg lift ratio is referred to aero efficiency. So while an F1 car has high drag, it also has ludicrous downforce. But that doesn't mean that we can't modify to get both a lift AND drag reduction.
Quote:
Originally Posted by CSG Mike View Post
What we've found in our testing is that additional mechanical grip generally is wasted, when you're already WOT (which is a LOT with this car).

For an extreme example, would you rather have 225 or 285 tires on a Miata? For a more realistic one, 225 vs 255? 195 vs 225? Of course it all depends on the situation...
the only reason i bothered mentioning the lift/downforce thing is because cars are shaped like aerofoils and have lift inherently. i think its important to talk about them separately because at any net amount of lift (positive or negative) you can have any drag coeffecient. adding downforce and removing things causing lift can be different.

there is some confusion going on here. we arent talking about the same things. i understand the importance of downforce and the grip that is provided. i was addressing the thought that running smaller tires would be a good idea in order to keep the drag coeffecient down. i was just saying that i would rather have mechanical grip over dropping a hundredth or so off the cod.

i also think aero grip is equally wasted if you are going wot. there are many people running around in miatas with 275s and in nearly every situation the miata with 225s is faster than the one with 195s. i do get your point though but wonder if it might be turning into a historical kinda myth. i think newer compounds are making the optimal tire width greater than they used to be but thats just speculation on my part.
fatoni is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front aerodynamics... need help! TuxedoCartman Cosmetic Modification (Interior/Exterior/Lighting) 16 10-23-2012 09:27 PM
Interesting aerodynamics differences between USDM, JDM, etc. yargk Scion FR-S / Toyota 86 GT86 General Forum 25 09-20-2012 04:00 PM
Coefficient Drag & Aftermarket Aerodynamics FT-86GOD Scion FR-S / Toyota 86 GT86 General Forum 1 06-28-2012 01:20 AM
Video: FR-S / BRZ Aerodynamics and D-4S Fuel Injection Explained Moshpit37 FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum 19 06-26-2012 09:19 PM
Video: FR-S / BRZ Aerodynamics and D-4S Fuel Injection Explained Moshpit37 BRZ Photos, Videos, Wallpapers, Gallery Forum 1 06-21-2012 12:47 PM


All times are GMT -4. The time now is 04:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.