License Plate Mount? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Ghost of Akina · 08-06-2022, 12:15 PM

Anybody know what this is?

I have noticed it on photos of a lot of JDM GR86’s and BRZ’s?
At first I thought plate adapter but the GR86 has divots for both JDM and USDM plates…

Just thinking of a better way to mount the plate with out it sitting right on the paint.

mycrors7 · 08-07-2022, 01:05 PM

In japan, removing your plate from your vehicle is illegal. It can’t be removed or tampered with unless the vehicle is sold

For that reason, rear plates are on a pivot point so you can still remove your rear bumper without having to go to a someone who has access to remove the tamper-proof seal on the bolt

Spektyr · 08-07-2022, 01:34 PM

What I did was I put adhesive foam feet, like you put on the bottom of something to stop it sliding around, on all four corners of the underside of my license tag. Then I screwed it onto the car.

That way if the plate ever vibrates for some reason there's a bit of a cushion between it and the paint. Granted, if dirt or grime gets under there it could abrade the paint a little (or a lot) but it will still be FAR less damaging than if it were metal-on-paint.

justinco · 08-07-2022, 05:57 PM

Quote:

Originally Posted by Ghost of Akina

....

Just thinking of a better way to mount the plate with out it sitting right on the paint.

I get these carbon fiber plate frames that have a foam backing for the license plate, for all my cars. Bit safer than the metal plate vibrating or brushing up the paint.

timurrrr · 08-07-2022, 08:50 PM

+1 to the foam backing sticker. I used this one on all my license plates: https://www.amazon.com/gp/product/B07ZZJH39Y/

I only used the foam sticker, not the hardware, as the dealers already took care of the hardware for me (for better or worse).

rande · 08-09-2022, 06:16 PM

Just put a few dabs of silicone on the back of the plate.

bcj · 08-09-2022, 10:54 PM

Rubber Baby Buggy Bumpers

Name: rbbb.png
Views: 641
Size: 118.2 KB

08-07-2022, 08:50 PM	#5
timurrrr Senior Member Join Date: May 2019 Drives: 2022 GR86 Location: Between Sonoma and Laguna Seca Posts: 1,707 Thanks: 2,129 Thanked 1,297 Times in 718 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	+1 to the foam backing sticker. I used this one on all my license plates: https://www.amazon.com/gp/product/B07ZZJH39Y/ I only used the foam sticker, not the hardware, as the dealers already took care of the hardware for me (for better or worse). __________________ Follow the build thread for my GR86!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear license plate mount	dragoontwo	BRZ Second-Gen (2022+) -- General Topics	1	12-11-2021 04:38 PM
License Plate Mount OEM. 2 Available	abevil	Exterior Parts (Aero, Lighting, Etc.)	1	02-24-2019 01:39 PM
Grimmspeed License Plate Mount	Cade01	Exterior Parts (Aero, Lighting, Etc.)	14	03-18-2014 01:00 PM
front license plate mount?	Jeong	Cosmetic Modification (Interior/Exterior/Lighting)	16	02-13-2014 10:54 PM
License Plate Mount	calidus	Cosmetic Modification (Interior/Exterior/Lighting)	2	02-10-2014 12:44 PM

08-07-2022, 01:05 PM	#2
mycrors7 Senior Member Join Date: Jul 2014 Drives: zd8 brz Location: United States Posts: 187 Thanks: 71 Thanked 189 Times in 88 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	In japan, removing your plate from your vehicle is illegal. It can’t be removed or tampered with unless the vehicle is sold For that reason, rear plates are on a pivot point so you can still remove your rear bumper without having to go to a someone who has access to remove the tamper-proof seal on the bolt

08-07-2022, 01:34 PM	#3
Spektyr Senior Member Join Date: May 2021 Drives: GR86 Location: Kansas Posts: 323 Thanks: 168 Thanked 249 Times in 139 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	What I did was I put adhesive foam feet, like you put on the bottom of something to stop it sliding around, on all four corners of the underside of my license tag. Then I screwed it onto the car. That way if the plate ever vibrates for some reason there's a bit of a cushion between it and the paint. Granted, if dirt or grime gets under there it could abrade the paint a little (or a lot) but it will still be FAR less damaging than if it were metal-on-paint.

08-09-2022, 06:16 PM	#6
rande Member Join Date: Jan 2010 Drives: Spyder, MR2, FRS, Tundra Location: KC Posts: 57 Thanks: 0 Thanked 12 Times in 10 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Just put a few dabs of silicone on the back of the plate.

User Name		Remember Me?
Password