Jackson Racing Rotrex Supercharger System Info and Discussion - Page 60 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CSG Mike · 08-27-2018, 03:27 AM

Quote:

Originally Posted by SubyRS1

Yes it is the California Carb tune by JR. It runs very well it just seems to be overpowering the stock clutch. I don't remember where I saw the video last week but it clearly showed the RPMs raising, then dropping under full throttle between 1st & 2nd gear. And that wasn't even clutching/reving the car the way I did. 100 extra hp does seem like a big jump for a stock clutch.

It sounds like you need a new clutch, or repairs to your system if something is damaged.

Thepest · 04-06-2020, 04:56 PM

Is there anyone here that can help me with a P0451 EVAP code after my JRSC installation? It popped up on the first drive after the install. I checked the PCV line and anchored it down with hose clamps. Could it be the MAP sensor seeing more pressure than before? I'm so lost right now. I've searched everything online and still wondering what could be wrong. Is it the BPV, fuel evaporation lines under the manifold, line to the intake or PCV valve....? Car has never thrown a code in 7 plus years of ownership.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kraftwerks Rotrex Supercharger Discussion	nelsmar	Forced Induction	697	01-18-2022 12:06 PM
Jackson Racing Supercharger Press Release and Info	CounterSpace Garage	Forced Induction	110	01-03-2017 09:04 PM
Jackson Racing supercharger	NoppyNop	Forced Induction	241	06-26-2014 03:05 PM
HKS GT Supercharger (Rotrex) in development!	madfast	Engine, Exhaust, Transmission	206	12-14-2012 03:28 PM
Jackson Racing FR-S	Unleashed	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	3	11-18-2012 02:29 PM

04-06-2020, 04:56 PM	#828
Thepest Junior Member Join Date: Dec 2015 Drives: 2013 FRS, 1997 eclipse gsx Location: Bay area California Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is there anyone here that can help me with a P0451 EVAP code after my JRSC installation? It popped up on the first drive after the install. I checked the PCV line and anchored it down with hose clamps. Could it be the MAP sensor seeing more pressure than before? I'm so lost right now. I've searched everything online and still wondering what could be wrong. Is it the BPV, fuel evaporation lines under the manifold, line to the intake or PCV valve....? Car has never thrown a code in 7 plus years of ownership.

User Name		Remember Me?
Password