WHAT DID YOU DO TO YOUR FRS TODAY?

[stevesnj]

My one and only sticker

[iAm_Neri]

Originally Posted by Pbrown

Have the 5 axis spoiler on my car and the 3M lasted 2 years. One half came loose, so I removed and re-applied new product. Works great again. MY 2 cents..... keep an eye on it.

That's dope, when you removed the other half that wasn't loose, did you use a heat gun to remove it?

[UFO]

Got some numbers for the car, they're magnetic. Now, I just have to figure out a way to secure them so they don't come off; I'm going to try some white masking tape or maybe electrical tape.

[Ashikabi]

Originally Posted by UFO

Got some numbers for the car, they're magnetic. Now, I just have to figure out a way to secure them so they don't come off; I'm going to try some white masking tape or maybe electrical tape.

Isn't the magnetism the way they are secured?

[UFO]

Originally Posted by Ashikabi

Isn't the magnetism the way they are secured?

Haha, yes. However, some of my friends have had issues with air getting underneath the leading edge and they just peel off, i really just want to smooth out the leading edge.

[Ashikabi]

Originally Posted by UFO

Haha, yes. However, some of my friends have had issues with air getting underneath the leading edge and they just peel off, i really just want to smooth out the leading edge.

Then the chassis painters or making tape is the way to go. Electrical tape leaves adhesive behind when it gets warm(like on a car in the sun).

[johan]

Originally Posted by Ashikabi

Then the chassis painters or making tape is the way to go. Electrical tape leaves adhesive behind when it gets warm(like on a car in the sun).

Yeahthat.... definitely don't do electrical tape. You'll regret it so hard.

[NyC Zn6]

Originally Posted by FX86

installed amber drl/fogs and stuck on a 86 decal over the tow hook cover

where did you get the amber bulbs?

[FX86]

Originally Posted by NyC Zn6

where did you get the amber bulbs?

eBay...total was less than $40 for all bulbs and the drl's were actually a set of 4 so i have two backups

my fogs are winjets so they are H11 bulbs and the drl's are obviously 9005..not the brightest LEDs but definitely eye-catching and different

[NyC Zn6]

Originally Posted by stevesnj

My one and only sticker

The only sticker these cars need

[stevesnj]

Originally Posted by UFO

Got some numbers for the car, they're magnetic. Now, I just have to figure out a way to secure them so they don't come off; I'm going to try some white masking tape or maybe electrical tape.

Best number ever!!

[whjdm069]

Originally Posted by iAm_Neri

That's dope, when you removed the other half that wasn't loose, did you use a heat gun to remove it?

The 3m tape wont last forever but that's the reason I used it. I like different looks. using a blow dryer and heat with fishing line to remove the spoiler works. it's just like removing the badges. then get some goo gone to finish taking the 3m tape off. once done use a rubbing compound and wax your car or just that area. don't drill the spoiler on unless it came with a factory spoiler. once the holes are there you can never go back. just my opinion.

[whjdm069]

Originally Posted by iAm_Neri

You used 3M? Let me know how it goes lol.... I like drilling stuff

The 3m tape works great.

I sold my Frs today after receiving this message



Sent from my SM-G530W using Tapatalk