Phantom FTS Electric Supercharger Owners Thread

[zc06_kisstherain]

i am about to install my catless header. is there new ots map for ESC+ UEL header?
current version i have is v2.02 for 91 oct, 93 oct, E85

[Sojhinn]

Originally Posted by zc06_kisstherain

i am about to install my catless header. is there new ots map for ESC+ UEL header?
current version i have is v2.02 for 91 oct, 93 oct, E85

Technically the tune was developed under a catless header so you should be good. The newest tune would be the flex tune. There are two versions of the flex:

Uel header
&
OEM header


Sent from my iPhone using Tapatalk

[zc06_kisstherain]

Originally Posted by Sojhinn

Technically the tune was developed under a catless header so you should be good. The newest tune would be the flex tune. There are two versions of the flex:

Uel header
&
OEM header


Sent from my iPhone using Tapatalk

thx for quick reply Sojhinn!!
i should be good then since i dont have any flex fuel kit
i will post some logs later

[Sojhinn]

Originally Posted by zc06_kisstherain

thx for quick reply Sojhinn!!

i should be good then since i dont have any flex fuel kit

i will post some logs later

Cool beans. Would love to see the logs. Which header did you get?


Sent from my iPhone using Tapatalk

[zc06_kisstherain]

Originally Posted by Sojhinn

Cool beans. Would love to see the logs. Which header did you get?


Sent from my iPhone using Tapatalk

TOMEI UEL catless..couldnt find any used for one for 3 months so i had to get new

[zc06_kisstherain]

just finished installed tomei uel and had datalogging

my mod is below

phantom esc v3
Tomei UEL
3rd Party OP
Berk FP
Q300

anway, i did some pulls on 3rd gear and looks little rich
i used 91 oct map
http://www.datazap.me/u/zc06kissther...a=1-2-5-7-8-10

here's some highway and some 4th gear pulls

http://www.datazap.me/u/zc06kissther...=1-5-7-8-10-12

last one is just driving around in highway as well as local

http://www.datazap.me/u/zc06kissther...og=0&data=1-12

i think i need some adjustment on tune.

thoughts?

[zc06_kisstherain]

forgot to post some vid!

[ame="https://www.youtube.com/watch?v=bO2KzIT9Nfo"]Tomei header BRZ - YouTube[/ame]

[fenton]

Sounds great man, nice a smooth. That Q300 works wonders with your other mods. How does it feel driving with boost now?

Originally Posted by zc06_kisstherain

forgot to post some vid!

[zc06_kisstherain]

Originally Posted by fenton

Sounds great man, nice a smooth. That Q300 works wonders with your other mods. How does it feel driving with boost now?

i can tell torque is improved before.
but i dont feel it's super faster either too
overall it got better!

[silent runner]

Hi guys, just a little blast from the past to let you know that the old V1 I had running on my 1993 Camry, is now installed on my 1999, Toyota Solara, V-6, 5spd manual. It seems to get along quite well with this more modern OBD2 engine management system, and continues to run with no CEL,s at a very nice pace. For reference it seems that it has a little more moxy than say... A Ford Explorer eco boost 3.5, to benchmark the general pace. This was a test/mule, self installed proto tester from back in the day, and it's still pushing some pretty good boost and fun around locally.

[FingR-S]

Originally Posted by silent runner

Hi guys, just a little blast from the past to let you know that the old V1 I had running on my 1993 Camry, is now installed on my 1999, Toyota Solara, V-6, 5spd manual. It seems to get along quite well with this more modern OBD2 engine management system, and continues to run with no CEL,s at a very nice pace. For reference it seems that it has a little more moxy than say... A Ford Explorer eco boost 3.5, to benchmark the general pace. This was a test/mule, self installed proto tester from back in the day, and it's still pushing some pretty good boost and fun around locally.

This is pretty cool to hear. I ended up going full supercharged last year after having the V2 in my FRS for over a year and this brings back good memories
It's a little thrill that keeps on thrillin'


Sent from my iPhone using Tapatalk

[Carsnguitars]

Hi guys. New poster here. I recently aquired a Phantom V2 ESC. But I'm having problems getting the DC motor to engage. Basically by all indications I should be good. I see 28.2 v on the meter. New pc680 batteries. I get all the beeps on startup. The controller fans starts up. Yet nothing from the motor/compressor on either click of the footswitch. Checked and rechecked all connections. I have also checked continuity on every wire that is between two components. Have been in contact with Sojhinn and Fenton, even with their help and suggestions no solution has come to light. Not too far back in this thread member @eft86 seemed to be exactly where I am. Didn't see where, if he found a solution. I msg him but haven't heard back. Maybe he's moved on? Anyway, I'm hoping one of you good folks will read this and have something further for me to try. I'm at a loss right now. Btw I did try Rob as well, but not heard there either. Thanks for any thoughts you can give.

[TM]

Originally Posted by Carsnguitars

Hi guys. New poster here. I recently aquired a Phantom V2 ESC. But I'm having problems getting the DC motor to engage. Basically by all indications I should be good. I see 28.2 v on the meter. New pc680 batteries. I get all the beeps on startup. The controller fans starts up. Yet nothing from the motor/compressor on either click of the footswitch. Checked and rechecked all connections. I have also checked continuity on every wire that is between two components. Have been in contact with Sojhinn and Fenton, even with their help and suggestions no solution has come to light. Not too far back in this thread member @eft86 seemed to be exactly where I am. Didn't see where, if he found a solution. I msg him but haven't heard back. Maybe he's moved on? Anyway, I'm hoping one of you good folks will read this and have something further for me to try. I'm at a loss right now. Btw I did try Rob as well, but not heard there either. Thanks for any thoughts you can give.

Did you pm or email rob? Rob always gets back to me in less than a day via email. He's the best person to walk you through troubleshooting.


Sent from my iPhone using Tapatalk

[Carsnguitars]

I have PM'd Rob. Haven't heard back