Squeaky Clutch - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Brz-123 · 12-17-2021, 02:18 AM

Hi All, I have a very squeaky clutch at the minute. The sound comes from under the hood and is not the clutch spring. It happens with the engine off and on , so is not the TOB. Anyone can advise what it could be and how to fix it?

Sent from my SM-G781B using Tapatalk

alex87f · 12-17-2021, 03:32 AM

There's quite a few threads around about this. It's your clutch fork.

You have to remove the clutch slave cylinder (2x 14mm bolts), remove the clutch fork boot, and put some thick grease behind the fork, on the small sphere it pivots on. Also lube the contact point between the slave piston and the fork, while you're at it.

All this can be done from under the hood. Shouldn't take long. Also, be sure to drive the car a bit after the manipulation, the squeak may still be here at first, but warming the car up will help the grease become more fluid and get where it needs to go.

12-17-2021, 02:18 AM	#1
Brz-123 Senior Member Join Date: Mar 2018 Drives: BRZ Location: UK Posts: 154 Thanks: 74 Thanked 80 Times in 59 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Squeaky Clutch Hi All, I have a very squeaky clutch at the minute. The sound comes from under the hood and is not the clutch spring. It happens with the engine off and on , so is not the TOB. Anyone can advise what it could be and how to fix it? Sent from my SM-G781B using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to fix squeaky clutch for good	cat94	Issues \| Warranty \| Recalls / TSB	15	09-16-2020 08:27 PM
How I fixed my squeaky clutch	jacjac3	Issues \| Warranty \| Recalls / TSB	40	09-27-2017 10:35 PM
Squeaky Clutch when depressed!	oppiee	Issues \| Warranty \| Recalls / TSB	29	09-01-2016 07:01 PM
squeaky clutch issue	bhbnuckle	Issues \| Warranty \| Recalls / TSB	3	06-27-2016 03:58 PM
Squeaky clutch	V1B	Engine, Exhaust, Transmission	24	06-16-2016 03:48 AM

12-17-2021, 03:32 AM	#2
alex87f Meow Join Date: Aug 2017 Drives: GT86, Volvo 996 Location: France Posts: 532 Thanks: 314 Thanked 444 Times in 236 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	There's quite a few threads around about this. It's your clutch fork. You have to remove the clutch slave cylinder (2x 14mm bolts), remove the clutch fork boot, and put some thick grease behind the fork, on the small sphere it pivots on. Also lube the contact point between the slave piston and the fork, while you're at it. All this can be done from under the hood. Shouldn't take long. Also, be sure to drive the car a bit after the manipulation, the squeak may still be here at first, but warming the car up will help the grease become more fluid and get where it needs to go.

User Name		Remember Me?
Password