SOCAL: Local FS/FT

[jsok2]

Hi everyone available for Pre-Order is the
*Brand New* MXP Comp RS Single Exit exhaust for 13-20 FRS/BRZ/86 and +22 BRZ/GR86

ETA: December 2022/January 2023

Specifically designed to fit the +22 GR86/BRZ chassis.

Will also fit ‘13-’20 FRS/BRZ/86

Preorder Special Pricing: $620.00 before shipping and tax

Price will increase after the preorder period has closed.

Please PM to place an order now!

Thanks!
Josh-Modinfinite Motorsports

*admins, I have tried messaging you to get approved as a vendor, but no one has replied, thus I am posting Please reach out to me!

[Chantico]

Practically new bride seat rails (tried to install but purchased wrong ones).
For fixed bucket seats
Driver side
FO Type (T902FO)

Comes mount, bracket, sliders, with all hardware

$200 OBO
Pickup only in Orange County

[DAEMANO]

Originally Posted by jsok2

Hi everyone available for Pre-Order is the
*Brand New* MXP Comp RS Single Exit exhaust for 13-20 FRS/BRZ/86 and +22 BRZ/GR86

ETA: December 2022/January 2023

Specifically designed to fit the +22 GR86/BRZ chassis.

Will also fit ‘13-’20 FRS/BRZ/86

Preorder Special Pricing: $620.00 before shipping and tax

Price will increase after the preorder period has closed.

Please PM to place an order now!

Thanks!
Josh-Modinfinite Motorsports

*admins, I have tried messaging you to get approved as a vendor, but no one has replied, thus I am posting Please reach out to me!

Sound clips and/or any info (specifically weight?)

[89_Manny]

Originally Posted by 89_Manny

For Sale
Can meet in Riverside, Foutain Valley, Santa Ana areas. PM for details and/or Meet up for purchase
Cash or Zelle but CASH is king

Borland Ver2 headers, No Cracks, No Dents and No Repairs done to it. I ran this headers for a while with no issue. Great sound and not so loud either. Painted with VHT high heat black paint. I’ll detailed photos
$250





Open Flash Flex Fuel Kit,
For sale everything is included to install. No leaks or tears on the fuel lines. Everything is in great condition I’ll include the fuel disconnect tool as well.
$400 FIRM





TRD Oil Filter Sandwich Plate
Brand new still wrapped in plastic from factory. Was going to use for oil cooler but never got around to it. FT86 sells for $152 plus tax and shipping. Selling for
$150







Sent from my iPhone using Tapatalk

BUMP


Sent from my iPhone using Tapatalk

[VIP BRZ]

Anyone who's parting out or doing a race build have an,

OEM Front Crash Bar / Bumper Reinforcement Bar

they could let go for pretty cheep? Trying to correct a fix-it ticket...

[86nub]

WTS

Parts came off of a 2013 Scion FR-S with 95k miles with the exception of the air intake assembly. That was removed early on.

Local pickup from 91706

1. Swift Sport Springs - $100
   - Don't have the tools to remove the springs from OEM shocks so, sold as-is
   - Will throw in the OEM springs if you want them
2. 2013 OEM Rear Sway Bar - $40
3. 2013 Pioneer CD Player Receiver - $40
   - Does not come with the mounting brackets
4. 2013 OEM Air Intake Hose- $50

[ikeryder13]

I'm trying to find a working engine block. It can be just the short block. I blew my motor and I am looking for a replacement.

[Falkon240]

WTB a few items:

1. Tom's Tail lights
   
2. Black body parts: rear lip or TRD rear bumper
   

I'm located in Temecula/Murrieta but willing to drive to LA or SD.

Please PM me

[DarkSunrise]

2017 OEM catback exhaust: Excellent condition. Larger exhaust tips than the 2013-14 models. No gaskets/hardware. $SOLD

2013 OEM clutch and flywheel. Excellent condition. Removed at 35,601 miles to install an exedy s1 clutch/fw upgrade. Comes with a brand new TOB (from the exedy kit) and used quill (good condition). $90.

[mmmm2001]

want to sell
17" original wheel and tire together of 2023 BRZ premium. i think i need to keep TPM for my new set of tire and wheels. $500
My car got delivered Oct 30th, no scratch on the wheel.
around 3500 miles now, going up slowly.

[Falkon240]

I have a full set of Enkei Raijin 18x9.5 +45 with 235/40/18 Lionhearts for sale.

Located in Murrieta, CA

Asking $1100 for the set.



Images here

[dakotan18]

so i just got an oft v2 and was wanting to do a pop tune using base timing, the mods on my care are tomie expreme uel catless headers, stock over and front pipe and an invidia n1 cat back exhaust would this be safe to do? If not what would you recommend?

[dwv619]

Valenti sb2 revo Tailights - 480
Beastronix 86nanny module - 150

No trades

Pickup in San Diego

[JohnnyP]

Hey all,
It's time to sell my Fr-S, so I'll be putting her back to stock. That means I'll be selling all of the aftermarket parts for the vehicle over the coming weeks and I'd like to start gauging interest in the parts locally before I get to listing them on social media or online. Overall, all of the parts are in very good shape with only a couple of the cosmetic items having more serious damage. I'm adding some initial photos below, but will get better photos after I've had a chance to remove the parts and clean them up a bit. If you are interested in any of the parts then please send me a PM and we can negotiate a price. I'll put some ballpark prices here in the post, but I'm open to hearing offers. Since I'm returning to stock, I'm also looking for a couple of OE body/cosmetic pieces that I'd be willing to barter for if anyone is interested in trading for the aftermarket parts.

Parts I have available:
Edelbrock Supercharger Kit (used about 15,000 miles, still on OE actuator, never had any issues with the unit) ---- $2,200
Delicious Tuning E85 Flex Fuel Kit W/ Larger DW Injectors ----$300
Front and Rear STI Brembo Brakes Black Powder Coating (2005 MY STI calipers w/ KNS Brakes V2 caliper adapter for rear brakes, DBA rotors *need to measure thickness*, stainless braided brake lines) Calipers were fresh rebuilds when installed about 20,000 miles ago -------- $1,500
Whiteline Max-G Coilovers with Racecomp Engineering Upper Strut Mounts (Coilover Specs) used about 15,000 miles (produced by AST for Whiteline, very high quality) ---- $1,300
Whiteline "Gold Unicorn" Adjustable Lower Control Arms KTA139 (very rare, only produced in very limited numbers) ------$300
Whiteline Adjustable Lower Control Arm KTA216A (may need rebuild kit) ----$80
Assortment of Whiteline and Pedders Sway Bars (Front and Rear)---- $75 each
TuneRS Motorsports Bolt-In Roll Bar (powder-coated white, access hole cut for Coilover adjustment, one Schroth ASM 4 point harness included) ----$600 (w/ trade of interior panel cut for bar access)
Spec D Tuning Tail Lights LINK (Some cosmetic blemishes, doesn't affect operation) ----- $100
Spec D Tuning Bumper Light/Reverse Light ---- $80
Seibon TS Style Carbon Fiber Hood (new clearcoat applied, mesh inserts removed, was getting hazy) ----$500 or Partial Trade for 2013 Whiteout (37J) Hood
Seibon OE Style Carbon Fiber Trunk with APR GTC-200 Spoiler (Trunk has new clearcoat applied and the spoiler has SERIOUS delamination of the gel coat. Recommend refinishing and painting) ----$600 or Partial Trade for 2013 Whiteout (37J) Trunk
STACK LTD Interior Gauges (Analog Gauges all work fine, AFR LCD Gauge has failed segments and will be included free) (Include AFR/EGT/Oil Press/Oil Temp/Boost) (Gauge Pods included) ---- $300
(4) Enkei RPF-1 Black 18×9.5+40 (Tires are basically bald, wheels don't have any major damage) ---- $1,000
(4) Enkei RS05RR powder-coated Bright Blue (Tires are basically bald, some scratches to wheel lips from tire machine) ---- $1,000

Parts Needing Major Repair/Refinishing:
Victory Function Widebody Fenders (Chips and cracks to the fiberglass at the front of the fender where it meets the bumper, recommend refinishing and repairing) ---- Looking to trade for OE 2013 Whiteout (37J) fenders
APR Fiberglass Front Bumper (major damage to the left front of the bumper, started repairs myself but still needs more fiberglass work and refinishing, good project) ---- $100

All of the interior is re-skinned with Katzkin Black/White Leather/Alcantra seats if anyone would like to trade for their stock interior plus cash.

There's probably more that will come up as I start going through it all. Feel free to request additional photos.

Thanks all!