invidia N2 setup recommendations? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sirelboe · 11-21-2020, 08:04 AM

Hi guys, new to this. Just picked up a 2013 brz limited with all stock exhaust setup. looking at a lot of videos i've decided i like the deep bassy sound of the invidia N2 cat-back exhaust..
i'm looking to keep that deep sound and gain some horses at the same time.
invidia N2 Model #HS12SST6N21GS

what unequal header might compliment this? overpipe? what else might i need to install this from the header back?
looking at the open flash tablet also..
any opinions/recommendations would be greatly appreciated as i'm a noob to all this..
thanks

Joveen · 11-21-2020, 08:33 AM

Header:
JDL or FTSpeed. If money is a concern then I recommend Megan racing. I've used it before going turbo and it was good and held up in CT winter.

Overpipe/Frontpipe :
JDL again. You can get their combo package which can be catted and resonated, dual resonated (i recommend this) or straight catless (please don't with your kind of exhaust.

ISR has a nice over pipe 2.5" for a good price.

And front pipe I would use dual resonated from ebay like circuitwerkz 2.5" as well. I had it on my setup and it was amazing.

I would go with Ecutek over OFT but thats just me. That POS tablet is not worth the time or money. But if you do get one please buy used and cheap.

Sent from my SM-N960U using Tapatalk

sirelboe · 11-21-2020, 08:57 AM

thanks for the input joveen!

check it out at 3:55 for sound. i like the deep bass sound of it.

will the double resonator effect the sound any?
i think i need to keep the cat due to new jersey inspection purposes.

and money isn't a huge concern, just not trying to spend too much either..
do you have any JDL model numbers i can reference??
i'll prob go with the ecutek also..

any clue what kind of horse gain i might get off this? (including the ecutek)

Joveen · 11-21-2020, 09:33 AM

Close to 200whp.

Sent from my SM-N960U using Tapatalk

Joveen · 11-21-2020, 09:34 AM

https://jdlautodesign.com/ also they will have a blackfriday sale soon.

Sent from my SM-N960U using Tapatalk

gen3v8 · 11-21-2020, 10:28 AM

Quote:

Originally Posted by sirelboe

any clue what kind of horse gain i might get off this? (including the ecutek)

20 if your lucky

sirelboe · 11-21-2020, 11:16 AM

Quote:

Originally Posted by gen3v8

20 if your lucky

dang that’s it lol

Joveen · 11-21-2020, 12:32 PM

The thing about ecutek tunes is that its not a one size fit all like oft. The tuner will tube your car with you have, to your driving habits etc...

Sent from my SM-N960U using Tapatalk

Will BRZ · 11-22-2020, 05:59 PM

This is a great video and sounds so good.

I wanted to buy the N2 during Black Friday this week, but it’s out of stock

sirelboe · 11-26-2020, 01:04 PM

Quote:

Originally Posted by Will BRZ

This is a great video and sounds so good.

I wanted to buy the N2 during Black Friday this week, but it’s out of stock

sounds so nice.. do they even make it anymore??

11-21-2020, 08:04 AM	#1
sirelboe Member Join Date: Oct 2020 Drives: 2013 BRZ Lmtd Location: NJ Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	invidia N2 setup recommendations? Hi guys, new to this. Just picked up a 2013 brz limited with all stock exhaust setup. looking at a lot of videos i've decided i like the deep bassy sound of the invidia N2 cat-back exhaust.. i'm looking to keep that deep sound and gain some horses at the same time. invidia N2 Model #HS12SST6N21GS what unequal header might compliment this? overpipe? what else might i need to install this from the header back? looking at the open flash tablet also.. any opinions/recommendations would be greatly appreciated as i'm a noob to all this.. thanks Last edited by sirelboe; 11-21-2020 at 09:22 AM.

11-21-2020, 08:57 AM	#3
sirelboe Member Join Date: Oct 2020 Drives: 2013 BRZ Lmtd Location: NJ Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	thanks for the input joveen! check it out at 3:55 for sound. i like the deep bass sound of it. will the double resonator effect the sound any? i think i need to keep the cat due to new jersey inspection purposes. and money isn't a huge concern, just not trying to spend too much either.. do you have any JDL model numbers i can reference?? i'll prob go with the ecutek also.. any clue what kind of horse gain i might get off this? (including the ecutek) Last edited by sirelboe; 11-21-2020 at 09:23 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CT/NY Invidia exhaust setup	Rob T	Engine, Exhaust, Bolt-Ons	3	12-29-2019 09:13 PM
INVIDIA >>SUPER SALE THREAD<< - Invidia N1 - Invidia Q300 - Invidia Front Pipes -	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	629	12-11-2016 09:21 PM
Alignment recommendations for my setup?	sqd	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	5	05-19-2016 01:33 PM
2013 BRZ exhaust setup? JDL + Invidia	andrew5826	Engine, Exhaust, Transmission	7	06-12-2013 04:02 PM
Track pad setup recommendations	orthojoe	Tracking / Autocross / HPDE / Drifting	15	02-25-2013 07:18 PM

11-21-2020, 08:33 AM	#2
Joveen Senior Member Join Date: Mar 2018 Drives: Bone stock Location: Windsor, CT Posts: 767 Thanks: 535 Thanked 232 Times in 162 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Header: JDL or FTSpeed. If money is a concern then I recommend Megan racing. I've used it before going turbo and it was good and held up in CT winter. Overpipe/Frontpipe : JDL again. You can get their combo package which can be catted and resonated, dual resonated (i recommend this) or straight catless (please don't with your kind of exhaust. ISR has a nice over pipe 2.5" for a good price. And front pipe I would use dual resonated from ebay like circuitwerkz 2.5" as well. I had it on my setup and it was amazing. I would go with Ecutek over OFT but thats just me. That POS tablet is not worth the time or money. But if you do get one please buy used and cheap. Sent from my SM-N960U using Tapatalk

11-21-2020, 09:33 AM	#4
Joveen Senior Member Join Date: Mar 2018 Drives: Bone stock Location: Windsor, CT Posts: 767 Thanks: 535 Thanked 232 Times in 162 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Close to 200whp. Sent from my SM-N960U using Tapatalk

11-21-2020, 09:34 AM	#5
Joveen Senior Member Join Date: Mar 2018 Drives: Bone stock Location: Windsor, CT Posts: 767 Thanks: 535 Thanked 232 Times in 162 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	https://jdlautodesign.com/ also they will have a blackfriday sale soon. Sent from my SM-N960U using Tapatalk

11-21-2020, 12:32 PM	#8
Joveen Senior Member Join Date: Mar 2018 Drives: Bone stock Location: Windsor, CT Posts: 767 Thanks: 535 Thanked 232 Times in 162 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	The thing about ecutek tunes is that its not a one size fit all like oft. The tuner will tube your car with you have, to your driving habits etc... Sent from my SM-N960U using Tapatalk

11-22-2020, 05:59 PM	#9
Will BRZ Damn that's crazy... Join Date: Oct 2018 Drives: 2015 BRZ Location: Texas Posts: 971 Thanks: 771 Thanked 772 Times in 467 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	This is a great video and sounds so good. I wanted to buy the N2 during Black Friday this week, but it’s out of stock

User Name		Remember Me?
Password