OFT on 2015?

[Shinobu's Smile]

Originally Posted by kch

Make sure to update your template file, which is separate from the firmware. That's probably what's causing your wonky readings.

I was running 7.1 with the Adv Multiplier of 0. I noticed they released 7.2 less than a month ago so Ill see if it fixes this. Thanks.

On a separate note, there's no XML file for the D00D cal ID for editing the ROMS or am I just misunderstanding how to do this?

[kch]

Originally Posted by Shinobu's Smile

I was running 7.1 with the Adv Multiplier of 0. I noticed they released 7.2 less than a month ago so Ill see if it fixes this. Thanks.

On a separate note, there's no XML file for the D00D cal ID for editing the ROMS or am I just misunderstanding how to do this?

I don't remember details (first time, rushed through it), but I know I edited my D00 rom with romraider a while back, so I guess there have to be XMLs out there somewhere.

[Shinobu's Smile]

Originally Posted by elBarto

Update the template file, fixes most of those issues.

Download it here

No Dice.

I updated the template file to 7.2 and still no numbers (just 0) for Adv. Multiplier, or Knock Correction. FLKC is either 100, -100, or -5. Is it possible im not recording one of the channels that is necessary for the Adv. Multiplier calculation? (I have it set up for engine speed, throttle, MAF Volt, Engine Load, VVT Intake, VVT Exh, Ignition Adv, KC Learned, AFR, ST Fuel Trim, LT Fuel Trim, Adv Multiplier, Knock Corr, and FLKC, Am i missing something necessary)?

Sorry @FRSwag2014 if i thread-jacked you but i suppose it is pertinent to OFT compatibility with 2015's (AT in my case)...or me just being a goofball.

OFManager - v1.20.0
Template File - 7.2
HW - 01.00
FW - 01.33

[steve99]

Originally Posted by Shinobu's Smile

No Dice.

I updated the template file to 7.2 and still no numbers (just 0) for Adv. Multiplier, or Knock Correction. FLKC is either 100, -100, or -5. Is it possible im not recording one of the channels that is necessary for the Adv. Multiplier calculation? (I have it set up for engine speed, throttle, MAF Volt, Engine Load, VVT Intake, VVT Exh, Ignition Adv, KC Learned, AFR, ST Fuel Trim, LT Fuel Trim, Adv Multiplier, Knock Corr, and FLKC, Am i missing something necessary)?

Sorry @FRSwag2014 if i thread-jacked you but i suppose it is pertinent to OFT compatibility with 2015's (AT in my case)...or me just being a goofball.

OFManager - v1.20.0
Template File - 7.2
HW - 01.00
FW - 01.33

Thats an issue with oft logging contact the oft guys by email or phone with your rom id .

[FRSwag2014]

Shiv got back to me. I was good. Flashed and running fine

[Shinobu's Smile]

Originally Posted by FRSwag2014

Shiv got back to me. I was good. Flashed and running fine

Did you PM, call, or email him through OFT site? Cause I have pm'ed and emailed him to no avail.

[efactor84]

Be nice if they have the D00D files for the 2015 FRS from RomRaider. I can't really do anything for editing, unless someone can correct me on this. I'm running the version 2.067 with no issues, but want to get into Rom editing for the fun of it.

[Shinobu's Smile]

Originally Posted by efactor84

Be nice if they have the D00D files for the 2015 FRS from RomRaider. I can't really do anything for editing, unless someone can correct me on this. I'm running the version 2.067 with no issues, but want to get into Rom editing for the fun of it.

Yup. Glad im not the only one. Does yours properly log "Adv Multiplier"? Mine just reports 0.

[efactor84]

Originally Posted by Shinobu's Smile

Yup. Glad im not the only one. Does yours properly log "Adv Multiplier"? Mine just reports 0.

Not sure, I'll keep you updated. What is significant about it?

[Shinobu's Smile]

Originally Posted by efactor84

Not sure, I'll keep you updated. What is significant about it?

Its necessary in determining if there is any knock present. Its probably very needed if you ever want to customize your tune, at least from what I gather (im new at this)

[efactor84]

Originally Posted by Shinobu's Smile

Yup. Glad im not the only one. Does yours properly log "Adv Multiplier"? Mine just reports 0.

Checked mine recently and mine does say "0" too.

[Shinobu's Smile]

Originally Posted by efactor84

Checked mine recently and mine does say "0" too.

I contacted them via their sales email to troubleshoot. They seem to think that I'm using bad gas and that there's knock present but I'm trying to insist that the number should fluctuate if thats the case and that I have used multiple brands of gas (always 93oct) and forwarded a couple of my logs. Ill keep you all posted with what they find when/if they get back to me.

[cookiesowns]

I'm on D00C STG1 with my own tweaks, and all parameters log fine for me.

I would flash back to stock, wipe the OFT, and update w/ template to see if it fixes.

However, I still feel the D00C STG1 tune on the AVCS are too aggressive, makes the motor sound very angry at 3800-4500rpm under part-throttle.

[Shinobu's Smile]

I just got an email back from the OFT people and they said there was a "small logging bug" with the 15AT model year and it should be fixed with the next update.

@efactor84
@Vroomin86