STUCK ON OFT STAGE 2 !! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

pher.da.rico · 12-06-2019, 04:45 AM

I don’t know if this specific topic has been covered but I really need help. So I’ve been running my stage 2 e85 tune for a while now no problems but recently I broke my V2 0FT i’m trying to source a screen and try to repair it but if worse come to worse. Would I be ok switching to ECUTEK and writing over that tune it with the help of a pro tuner or do I HAVE to tune it with my OFT before switching over. I’m not worried about warranty I just wanna be able to optimize my tune with peace of mind. Thank you for your time !!

Sent from my iPhone using Tapatalk

kev0 · 12-06-2019, 05:05 AM

https://www.digikey.com/product-deta...E6NuDYE9hVpMz4

^ that is the screen you will need to replace your OFT V2 screen. It's a very simple process.

Nope, you can't flash an EcuTek tune over your OFT tune. EcuTek will give you a ECU mismatch error code. It happened to me when I forgot to unmarry my OFT.

Worst comes to worst, you can go to dealership and have them flash your car back to stock tune, but that will render your OFT useless. I do not recommend doing this. Only do it if it is your only option. Make sure you have 91 or 93 in the tank before going to dealership.

pher.da.rico · 12-06-2019, 05:08 AM

Thanks man imma order that screen an update you from there !! Thank you !

Sent from my iPhone using Tapatalk

mrjj · 12-06-2019, 03:32 PM

You can read or re-flash with a Tactrix OpenPort. It's probably cheaper than the Ecutek option.

steve99 · 12-06-2019, 07:14 PM

As above cheapest way out of your problem will bw buy tactrix $170 usa and flash with that

pher.da.rico · 12-06-2019, 11:28 PM

Quote:

Originally Posted by mrjj

You can read or re-flash with a Tactrix OpenPort. It's probably cheaper than the Ecutek option.

Where would I go from there if need be ? Would I stick with the tactrix or then switch to ecutek? Excuse my ignorance

Sent from my iPhone using Tapatalk

steve99 · 12-07-2019, 01:35 AM

Quote:

Originally Posted by pher.da.rico

Where would I go from there if need be ? Would I stick with the tactrix or then switch to ecutek? Excuse my ignorance

Sent from my iPhone using Tapatalk

Neither oft or tactrix lock ecu like ecutek or BRZEdit.

So is no problem to flash with tactrix then reflash with oft or the other way round

pher.da.rico · 12-07-2019, 06:46 AM

Do you guys know of anyone that tunes on the OFT platform?

Sent from my iPhone using Tapatalk

kev0 · 12-07-2019, 07:15 AM

Quote:

Originally Posted by pher.da.rico

Do you guys know of anyone that tunes on the OFT platform?

Sent from my iPhone using Tapatalk

@steve99 and http://site.wayneroms.com:8000/ are two that I know.

pher.da.rico · 12-07-2019, 07:18 AM

@steve99 if I could get some insight and a custom tune I’d appreciate it ! I’m from SoCal
What about you guys @kev0

Sent from my iPhone using Tapatalk

steve99 · 12-07-2019, 08:06 AM

Quote:

Originally Posted by pher.da.rico

Do you guys know of anyone that tunes on the OFT platform?

Sent from my iPhone using Tapatalk

Just message me i can custom tune on oft , tactrix or ecutek for you

12-06-2019, 04:45 AM	#1
pher.da.rico Member Join Date: Feb 2019 Drives: 2018 Premium Black silica BRZ Location: California Posts: 53 Thanks: 28 Thanked 6 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	STUCK ON OFT STAGE 2 !! I don’t know if this specific topic has been covered but I really need help. So I’ve been running my stage 2 e85 tune for a while now no problems but recently I broke my V2 0FT i’m trying to source a screen and try to repair it but if worse come to worse. Would I be ok switching to ECUTEK and writing over that tune it with the help of a pro tuner or do I HAVE to tune it with my OFT before switching over. I’m not worried about warranty I just wanna be able to optimize my tune with peace of mind. Thank you for your time !! Sent from my iPhone using Tapatalk

12-07-2019, 07:18 AM	#10
pher.da.rico Member Join Date: Feb 2019 Drives: 2018 Premium Black silica BRZ Location: California Posts: 53 Thanks: 28 Thanked 6 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	STUCK ON OFT STAGE 2 !! @steve99 if I could get some insight and a custom tune I’d appreciate it ! I’m from SoCal What about you guys @kev0 Sent from my iPhone using Tapatalk

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full Blown's New Build for the 2015 Season Stage 3 (2.19L motor) + Stage 3 Turbo kit	FullBlown	Forced Induction	47	06-20-2018 03:38 AM
FRS single stage vs dual stage driver's airbag	mhiscott	Issues \| Warranty \| Recalls / TSB	2	09-23-2017 04:43 PM
Exedy Stage 1 Failure: Advice + Stage 2 Questions	Pneub	Engine, Exhaust, Transmission	4	07-18-2016 10:24 PM
FBM Stage 1 Cams w/ Stage 2 Head Results 743HP!	FullBlown	Forced Induction	119	03-24-2015 11:16 PM
Questions about upgrading the avo stage 1 turbo kit to stage 1.5 and 2	Astroboy	Forced Induction	4	03-01-2014 08:29 PM

12-06-2019, 05:05 AM	#2
kev0 Senior Member Join Date: Feb 2018 Drives: '14 Location: Midwest Posts: 485 Thanks: 246 Thanked 99 Times in 76 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	https://www.digikey.com/product-deta...E6NuDYE9hVpMz4 ^ that is the screen you will need to replace your OFT V2 screen. It's a very simple process. Nope, you can't flash an EcuTek tune over your OFT tune. EcuTek will give you a ECU mismatch error code. It happened to me when I forgot to unmarry my OFT. Worst comes to worst, you can go to dealership and have them flash your car back to stock tune, but that will render your OFT useless. I do not recommend doing this. Only do it if it is your only option. Make sure you have 91 or 93 in the tank before going to dealership.

12-06-2019, 05:08 AM	#3
pher.da.rico Member Join Date: Feb 2019 Drives: 2018 Premium Black silica BRZ Location: California Posts: 53 Thanks: 28 Thanked 6 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thanks man imma order that screen an update you from there !! Thank you ! Sent from my iPhone using Tapatalk

12-06-2019, 03:32 PM	#4
mrjj Member Join Date: Mar 2019 Drives: GT86 2013 Location: Sweden Posts: 49 Thanks: 46 Thanked 24 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	You can read or re-flash with a Tactrix OpenPort. It's probably cheaper than the Ecutek option.

12-06-2019, 07:14 PM	#5
steve99 Banned Join Date: Dec 2013 Drives: FT86 Location: Australia Posts: 7,998 Thanks: 1,035 Thanked 4,985 Times in 2,981 Posts Mentioned: 598 Post(s) Tagged: 2 Thread(s)	As above cheapest way out of your problem will bw buy tactrix $170 usa and flash with that

12-07-2019, 06:46 AM	#8
pher.da.rico Member Join Date: Feb 2019 Drives: 2018 Premium Black silica BRZ Location: California Posts: 53 Thanks: 28 Thanked 6 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Do you guys know of anyone that tunes on the OFT platform? Sent from my iPhone using Tapatalk

User Name		Remember Me?
Password