Verus 2-piece front splitter (13-16 BRZ) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

norcalpb · 09-27-2022, 01:57 PM

Decided to go a slightly different direction with the car and will be parting ways with my beloved splitter to fund said direction.

Standard 13-16 brz/frs 2-piece splitter but comes with the 13-16 brz air dam and carbon fiber endplates. As you can see the leading edge of the splitter is slightly bent upwards but could be forced back down with enough patience.

Overall, the splitter is in good shape but has some obvious signs of wear.

I replaced the air damn hardware with nylon hardware, and titanium nuts for the endplate hardware.

All other hardware is included except for an m6 rivet nut tool (for splitter) and the #10 rivet nut tool + 6x #10 rivet nuts (for endplates).

New this setup is over $700, asking $460 shipped.

Please PM me with any questions.

Evil Rocky · 09-27-2022, 02:59 PM

what is with the circles in the splitter? is that how it comes?

norcalpb · 09-27-2022, 07:13 PM

Quote:

Originally Posted by Evil Rocky

what is with the circles in the splitter? is that how it comes?

No those are something I did so all the bolts/washers would be tucked away under the splitter.

GabeoHuncho · 09-30-2022, 08:49 PM

Still got this? I'm very interested...Sent you a PM!

jflogerzi · 09-30-2022, 10:28 PM

Quote:

Originally Posted by norcalpb

Decided to go a slightly different direction with the car and will be parting ways with my beloved splitter to fund said direction.

Standard 13-16 brz/frs 2-piece splitter but comes with the 13-16 brz air dam and carbon fiber endplates. As you can see the leading edge of the splitter is slightly bent upwards but could be forced back down with enough patience.

Overall, the splitter is in good shape but has some obvious signs of wear.

I replaced the air damn hardware with nylon hardware, and titanium nuts for the endplate hardware.

All other hardware is included except for an m6 rivet nut tool (for splitter) and the #10 rivet nut tool + 6x #10 rivet nuts (for endplates).

New this setup is over $700, asking $450 shipped.

Please PM me with any questions.

Which way you heading to get rid of such a good splitter package?

norcalpb · 10-01-2022, 07:27 PM

Quote:

Originally Posted by jflogerzi

Which way you heading to get rid of such a good splitter package?

I'm thinking about going with a splitter-less setup for the time being. Maybe canards + STi front lip.

It really is a nice piece though.

happyshlappy · 12-21-2022, 01:31 PM

So I’d need to buy a rivet tool to install it?

norcalpb · 12-27-2022, 12:38 PM

Quote:

Originally Posted by happyshlappy

So I’d need to buy a rivet tool to install it?

Yes, but unfortunately I’ve decided to keep the splitter for now.

norcalpb · 12-27-2022, 12:39 PM

Keeping item for now, please lock

09-30-2022, 08:49 PM	#4
GabeoHuncho Member Join Date: Nov 2021 Drives: 2013 FR-S Vortech V3 Location: Nashville, TN Posts: 70 Thanks: 6 Thanked 14 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Still got this? I'm very interested...Sent you a PM! Last edited by GabeoHuncho; 10-01-2022 at 01:32 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Verus aero splitter, UCW wing, diffuser	RhythmAddict0	Want-To-Buy Requests	8	12-22-2020 03:32 PM
Front Splitter Endplates - Verus Engineering	VerusEric	Cosmetic Modification (Interior/Exterior/Lighting)	46	08-10-2016 10:54 PM
BRZ Password JDM 3 Piece front Splitter + Side Skirts	protpibe	Exterior Parts (Aero, Lighting, Etc.)	6	02-07-2016 09:36 PM
Password JDM 3 Piece front splitter/Version Select CF Side skirt Paint Matched	BRZPDX	Cosmetic Modification (Interior/Exterior/Lighting)	15	08-10-2013 07:08 PM
Password JDM 3 piece front splitter	BRZPDX	Cosmetic Modification (Interior/Exterior/Lighting)	3	05-21-2013 11:54 AM

09-27-2022, 01:57 PM	#1
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,296 Thanks: 1,212 Thanked 861 Times in 570 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Verus 2-piece front splitter (13-16 BRZ) Decided to go a slightly different direction with the car and will be parting ways with my beloved splitter to fund said direction. Standard 13-16 brz/frs 2-piece splitter but comes with the 13-16 brz air dam and carbon fiber endplates. As you can see the leading edge of the splitter is slightly bent upwards but could be forced back down with enough patience. Overall, the splitter is in good shape but has some obvious signs of wear. I replaced the air damn hardware with nylon hardware, and titanium nuts for the endplate hardware. All other hardware is included except for an m6 rivet nut tool (for splitter) and the #10 rivet nut tool + 6x #10 rivet nuts (for endplates). New this setup is over $700, asking $460 shipped. Please PM me with any questions. Last edited by norcalpb; 10-08-2022 at 03:26 PM.

09-27-2022, 02:59 PM	#2
Evil Rocky Senior Member Join Date: May 2015 Drives: FRS Location: Chiraq Posts: 299 Thanks: 74 Thanked 54 Times in 50 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	what is with the circles in the splitter? is that how it comes?

12-21-2022, 01:31 PM	#7
happyshlappy Junior Member Join Date: Oct 2022 Drives: Brz 2013 Location: Utah Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	So I’d need to buy a rivet tool to install it?

12-27-2022, 12:39 PM	#9
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,296 Thanks: 1,212 Thanked 861 Times in 570 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Keeping item for now, please lock

User Name		Remember Me?
Password