86Frost's 10 series build - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

86Frost · 11-11-2015, 01:18 AM

Thought I'd share my build with you guys

Exterior: Obvious gt-86 headlights, Apr carbon fiber splitter, grimmspeed licence relocation kit, grillecraft front grille, Diode dynamics fog light kit with on off switch, led drls, jdm clear side markers, NIA eyelids, 19in niche verona m-150's, password jdm side skirts, trd front fender aero fins, apr gt3 mirrors, rexspeed sti style rear spats, oem style rear diffuser, spyder auto version 2 tailights, gcs smoked 4th brake light, apr gtc 200 rear wing, beatsonic shark fin.

Interior: Ryan turek shift knob, rexspeed carbon fiber ebrake, perrin drift button, raceseng reverse lock out.

Audio: Obvious 10 series upgraded pioneer head unit and speakers, JL audio 500 watt amp for 12in Exile subwoofer.

Engine: Lol I'm a ricer I know ;,( I like my warranty :P anyways, TRD performance air intake, Perrin 3in header back exhaust. Run mobile 1 oil.

Drivetrain: TRD quick shift kit, MTEC shift spring kit, am also using amsoil gl-4 mt transmission fluid in the tranny.

Suspension: 2in lowering springs

Tires: Nankang ultra sport NS-II 225 Front 245 Rear

Plans: I'm thinking about a CF hood, I know they are about a pound heavier than stock, but I love the looks (Rice) and cooling ability. I am looking at seibon VT, FA, VS or TS. Maybe you guys could help me decide?

I think I may also be getting the ft86 rear diffuser, would I need one with all of the downforce I have in the front and rear? I'm planning to put this in a wind tunnel eventually for sh*ts and giggles, actually planning on tracking haha. Input on that subject would be great too.

May also put just a little spoiler on the back of my trunk, just so it doesn't look like a huge spoiler is just *bam* right there, know what I mean?

Am planning to make almost all alanctara interior and get raceseng ashiko shifter. I also am thinking about wrapping my roof? Not 100% on that. 5axis lip I am thinking about as well, idk though, I have lots of plans haha. Sometime in the not so near future, not too sure. I am planning on some forced induction, UEL headers, ecutek tune and all that jazz.

Will post more pics tomorrow, planning on taking some pics. Not much of a photographer though I love it.

Thanks for viewing my build!

Input, comments or opinions will be appreciated!

humfrz · 11-11-2015, 01:23 AM

Sounds nice ....... yes, pictures would be good .......

(your attachments aren't working for me)

humfrz

86Frost · 11-11-2015, 01:23 AM

Quote:

Originally Posted by humfrz

Sounds nice ....... yes, pictures would be good .......

humfrz

Kinda new at this, am trying to post my current pics ��

EDIT: Try that

Sent from my iPhone using Tapatalk

carma143 · 11-11-2015, 07:31 AM

All I am getting is a column of 7 small picture icons without any actual picture.

Tcoat · 11-11-2015, 08:51 AM

http://www.ft86club.com/forums/forumdisplay.php?f=40

Braces · 11-11-2015, 09:08 AM

In for pics.

86Frost · 11-11-2015, 01:41 PM

Quote:

Originally Posted by 86Frost

Thought I'd share my build with you guys

Exterior: Obvious gt-86 headlights, Apr carbon fiber splitter, grimmspeed licence relocation kit, grillecraft front grille, Diode dynamics fog light kit with on off switch, led drls, jdm clear side markers, NIA eyelids, 19in niche verona m-150's, password jdm side skirts, trd front fender aero fins, apr gt3 mirrors, rexspeed sti style rear spats, oem style rear diffuser, spyder auto version 2 tailights, gcs smoked 4th brake light, apr gtc 200 rear wing, beatsonic shark fin.

Interior: Ryan turek shift knob, rexspeed carbon fiber ebrake, perrin drift button, raceseng reverse lock out.

Audio: Obvious 10 series upgraded pioneer head unit and speakers, JL audio 500 watt amp for 12in Exile subwoofer.

Engine: Lol I'm a ricer I know ;,( I like my warranty :P anyways, TRD performance air intake, Perrin 2.5in header back exhaust. Run mobile 1 oil.

Drivetrain: TRD quick shift kit, MTEC shift spring kit, am also using amsoil gl-4 mt transmission fluid in the tranny.

Suspension: 2in lowering springs

Tires: Nankang ultra sport NS-II 225 Front 245 Rear

Plans: I'm thinking about a CF hood, I know they are about a pound heavier than stock, but I love the looks (Rice) and cooling ability. I am looking at seibon VT, FA, VS or TS. Maybe you guys could help me decide?

I think I may also be getting the ft86 rear diffuser, would I need one with all of the downforce I have in the front and rear? I'm planning to put this in a wind tunnel eventually for sh*ts and giggles, actually planning on tracking haha. Input on that subject would be great too.

May also put just a little spoiler on the back of my trunk, just so it doesn't look like a huge spoiler is just *bam* right there, know what I mean?

Am planning to make almost all alanctara interior and get raceseng ashiko shifter. I also am thinking about wrapping my roof? Not 100% on that. 5axis lip I am thinking about as well, idk though, I have lots of plans haha. Sometime in the not so near future, not too sure. I am planning on some forced induction, UEL headers, ecutek tune and all that jazz.

Will post more pics tomorrow, planning on taking some pics. Not much of a photographer though I love it.

Thanks for viewing my build!

Input, comments or opinions will be appreciated!

Name: ImageUploadedByTapatalk1447267163.777892.jpg
Views: 751
Size: 270.8 KB

Name: ImageUploadedByTapatalk1447267181.180077.jpg
Views: 789
Size: 329.1 KB

Name: ImageUploadedByTapatalk1447267195.346626.jpg
Views: 744
Size: 286.4 KB

Name: ImageUploadedByTapatalk1447267207.798610.jpg
Views: 2345
Size: 317.9 KB

Name: ImageUploadedByTapatalk1447267224.864998.jpg
Views: 1218
Size: 361.3 KB

Name: ImageUploadedByTapatalk1447267247.650383.jpg
Views: 728
Size: 280.5 KB

Name: ImageUploadedByTapatalk1447267277.736463.jpg
Views: 931
Size: 499.0 KB

Name: ImageUploadedByTapatalk1447267291.053077.jpg
Views: 741
Size: 347.7 KB

Did that help any?

Sent from my iPhone using Tapatalk

humfrz · 11-11-2015, 02:00 PM

Quote:

Originally Posted by 86Frost

................

Did that help any?

Sent from my iPhone using Tapatalk

There the pictures are .........

Well, you sure have been busy with the mods .....

However, for me, ...... that wing would take some getten used to .......

Good show!

humfrz

Gringosteve · 11-11-2015, 02:53 PM

Not sure about the front number plate holder

86Frost · 11-11-2015, 03:14 PM

Quote:

Originally Posted by humfrz

There the pictures are .........

Well, you sure have been busy with the mods .....

However, for me, ...... that wing would take some getten used to .......

Good show!

humfrz

Thanks! I have always been a fan of big wings haha, but for some I know it is a little much.

Sent from my iPhone using Tapatalk

86Frost · 11-11-2015, 03:15 PM

Quote:

Originally Posted by Gringosteve

Not sure about the front number plate holder

I would rather not have it, but it is illegal to not have front plates in Oregon :/

Sent from my iPhone using Tapatalk

Gringosteve · 11-11-2015, 03:39 PM

Name: ImageUploadedByTapatalk1447274368.517520.jpg
Views: 1005
Size: 392.6 KB

Can you not do something like this in the UK?

86Frost · 11-11-2015, 03:42 PM

Quote:

Originally Posted by Gringosteve

Attachment 124796

Can you not do something like this in the UK?

You can, but I'd have to drill into my bumper and I'd rather not if I didn't have to hah

Sent from my iPhone using Tapatalk

NyC Zn6 · 11-11-2015, 03:46 PM

love the whole build 10 Series fam lol

11-11-2015, 01:18 AM	#1
86Frost Member Join Date: Oct 2015 Drives: 10 series frs Location: PNW Posts: 17 Thanks: 1 Thanked 6 Times in 3 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	86Frost's 10 series build Thought I'd share my build with you guys Exterior: Obvious gt-86 headlights, Apr carbon fiber splitter, grimmspeed licence relocation kit, grillecraft front grille, Diode dynamics fog light kit with on off switch, led drls, jdm clear side markers, NIA eyelids, 19in niche verona m-150's, password jdm side skirts, trd front fender aero fins, apr gt3 mirrors, rexspeed sti style rear spats, oem style rear diffuser, spyder auto version 2 tailights, gcs smoked 4th brake light, apr gtc 200 rear wing, beatsonic shark fin. Interior: Ryan turek shift knob, rexspeed carbon fiber ebrake, perrin drift button, raceseng reverse lock out. Audio: Obvious 10 series upgraded pioneer head unit and speakers, JL audio 500 watt amp for 12in Exile subwoofer. Engine: Lol I'm a ricer I know ;,( I like my warranty :P anyways, TRD performance air intake, Perrin 3in header back exhaust. Run mobile 1 oil. Drivetrain: TRD quick shift kit, MTEC shift spring kit, am also using amsoil gl-4 mt transmission fluid in the tranny. Suspension: 2in lowering springs Tires: Nankang ultra sport NS-II 225 Front 245 Rear Plans: I'm thinking about a CF hood, I know they are about a pound heavier than stock, but I love the looks (Rice) and cooling ability. I am looking at seibon VT, FA, VS or TS. Maybe you guys could help me decide? I think I may also be getting the ft86 rear diffuser, would I need one with all of the downforce I have in the front and rear? I'm planning to put this in a wind tunnel eventually for shts and giggles, actually planning on tracking haha. Input on that subject would be great too. May also put just a little spoiler on the back of my trunk, just so it doesn't look like a huge spoiler is just bam* right there, know what I mean? Am planning to make almost all alanctara interior and get raceseng ashiko shifter. I also am thinking about wrapping my roof? Not 100% on that. 5axis lip I am thinking about as well, idk though, I have lots of plans haha. Sometime in the not so near future, not too sure. I am planning on some forced induction, UEL headers, ecutek tune and all that jazz. Will post more pics tomorrow, planning on taking some pics. Not much of a photographer though I love it. Thanks for viewing my build! Input, comments or opinions will be appreciated! Last edited by 86Frost; 11-15-2015 at 12:01 AM.

11-11-2015, 08:51 AM	#5
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,845 Thanks: 61,656 Thanked 108,283 Times in 46,456 Posts Mentioned: 2495 Post(s) Tagged: 50 Thread(s)	http://www.ft86club.com/forums/forumdisplay.php?f=40 __________________ Racecar spelled backwards is Racecar, because Racecar.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crashdummy's Release Series 1.0 build	Crashdummy	Member's Car Journals	66	02-01-2019 10:25 AM
My Series.Blue Build	adamg	Member's Car Journals	61	11-08-2018 03:41 PM
Everybody Series \| Build Video(s)	oemaudioplus	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	7	01-18-2018 02:50 PM
Storm, Scavanger's 10 series FRS build	Scavanger	Member's Car Journals	4	09-14-2014 03:32 PM
RyanITV's FI FR-S 10 Series Build	RyanITV	Member's Car Journals	69	02-02-2014 08:23 PM

11-11-2015, 01:23 AM	#2
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 29,869 Thanks: 28,791 Thanked 31,818 Times in 16,426 Posts Mentioned: 708 Post(s) Tagged: 2 Thread(s)	Sounds nice ....... yes, pictures would be good ....... (your attachments aren't working for me) humfrz

11-11-2015, 07:31 AM	#4
carma143 Senior Member Join Date: Jan 2014 Drives: Toyota Highlander; Subaru BRZ (SWP) Location: California Posts: 431 Thanks: 137 Thanked 156 Times in 95 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	All I am getting is a column of 7 small picture icons without any actual picture.

11-11-2015, 09:08 AM	#6
Braces Senior Member Join Date: Sep 2012 Drives: 17 Alfa Romeo 4C Location: Scottsdale, Arizona Posts: 987 Thanks: 570 Thanked 711 Times in 365 Posts Mentioned: 14 Post(s) Tagged: 2 Thread(s)	In for pics.

11-11-2015, 02:53 PM	#9
Gringosteve Senior Member Join Date: Nov 2015 Drives: UK Spec GT86 Location: UK Posts: 144 Thanks: 52 Thanked 44 Times in 33 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Not sure about the front number plate holder

11-11-2015, 03:39 PM	#12
Gringosteve Senior Member Join Date: Nov 2015 Drives: UK Spec GT86 Location: UK Posts: 144 Thanks: 52 Thanked 44 Times in 33 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can you not do something like this in the UK?

11-11-2015, 03:46 PM	#14
NyC Zn6 Senior Member Join Date: Apr 2013 Drives: 10 Series #974 6m/t Location: NYC Posts: 1,956 Thanks: 1,357 Thanked 1,141 Times in 669 Posts Mentioned: 6 Post(s) Tagged: 2 Thread(s)	love the whole build 10 Series fam lol

User Name		Remember Me?
Password