Mystery pink springs - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Decep · 03-30-2018, 03:09 PM

They are pink but i dont see any STI logo or anything. The damper according to the part number is the sachs unit. these are supposedly pulled from a brz ts.

springs, i dont see any part numbers at all though i dont know if there are usually part numbers on springs.

https://imgur.com/a/loXEY

any thoughts? return them?

x808drifter · 03-30-2018, 05:47 PM

Quote:

Originally Posted by Decep

They are pink but i dont see any STI logo or anything. The damper according to the part number is the sachs unit. these are supposedly pulled from a brz ts.

springs, i dont see any part numbers at all though i dont know if there are usually part numbers on springs.

any thoughts? return them?

FTFY.....

Decep · 03-30-2018, 06:01 PM

Thanks? I tend not to post images directly since they sometimes make mobile viewing a pain in the ass.

.Kyle · 03-30-2018, 06:29 PM

Subaru has colored their STi suspension parts cherry blossom red (pink) since the 90s. They are typically the standard part on the Japanese car and an accessory for the US market. Likely spring set B2010CA000.

Decep · 03-30-2018, 06:41 PM

Quote:

Originally Posted by .Kyle

Subaru has colored their STi suspension parts cherry blossom red (pink) since the 90s. They are typically the standard part on the Japanese car and an accessory for the US market. Likely spring set B2010CA000.

Right, i know about STI pink springs, just dont see the STI logo on these.

gpvecchi · 03-31-2018, 05:27 AM

There are 3 different pink springs with different part numbers. One is aftermarket for US, one is aftermarket for JDM and one is stock for STi/tS models.
Perhaps the third one are not branded...

Decep · 03-31-2018, 02:57 PM

That's a good point. I will just have to install them and see.

More interested in the sachs dampers over my too-stiff-over-bad-roads 2013 showas tbh.

gpvecchi · 04-01-2018, 05:58 AM

Oh, lowering is 10 mm for US Kit and 15 mm for JDM. Can you check what’s lowering for your set?

Decep · 04-01-2018, 06:06 PM

I've no idea, though I wasn't even aware the TS or PP versions of the car are lowered. Gonna install them in a week or two.

Going to install the 1mm thicker rear sway bar too since im changing to 2017 suspension.

gpvecchi · 04-02-2018, 05:03 AM

FYI, website says that aftermarket STi JDM springs are not compatible on STi cars...

Decep · 04-02-2018, 05:26 PM

Yeah. The place I bought them from said it was from a BRZ STI (ts?) with 600miles. If they were aftermarket they'd have the sti logo on them I'd think.

gpvecchi · 04-10-2018, 06:07 PM

I got my pink springs today (JDM aftermarket); there are some paint spots, that identify spring type. Mine are 1 yellow and 1 white on front springs.
Can you check if your OEM have same colors? If so, the spring is the same, just not branded.

chaoskaze · 04-10-2018, 06:40 PM

I don't understand what you are trying to do, confirm they are off a tS?

the damper itself already has the part number on it being sachs, but it's not the normal black spring. so it is the tS version.

US version tS doesn't emphasis the STI logo on that car, there is either no sti marking or mostly blacked out.

hope what i said helps.

PS: If they wanna fuk around with you, i don't think anyone has the time to actually swap the srping out .... just for that...

Decep · 04-10-2018, 09:03 PM

Quote:

Originally Posted by chaoskaze

I don't understand what you are trying to do, confirm they are off a tS?

the damper itself already has the part number on it being sachs, but it's not the normal black spring. so it is the tS version.

US version tS doesn't emphasis the STI logo on that car, there is either no sti marking or mostly blacked out.

hope what i said helps.

PS: If they wanna fuk around with you, i don't think anyone has the time to actually swap the srping out .... just for that...

Honestly was just paranoid i got some random pink springs since i figured there'd be STI logo on them, lol. Im gonna install them tomorrow.

and thank you, that did help.

03-30-2018, 03:09 PM	#1
Decep Senior Member Join Date: May 2017 Drives: 2013 FR-S Series 10 Location: CA Posts: 1,061 Thanks: 166 Thanked 492 Times in 323 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Mystery pink springs They are pink but i dont see any STI logo or anything. The damper according to the part number is the sachs unit. these are supposedly pulled from a brz ts. springs, i dont see any part numbers at all though i dont know if there are usually part numbers on springs. https://imgur.com/a/loXEY any thoughts? return them?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB - STI Pink Springs	Mr.Impreza	Want-To-Buy Requests	4	09-24-2016 04:40 PM
WTB STI Pink springs	chaoskaze	Want-To-Buy Requests	0	02-15-2016 07:20 AM
WTB: STI Pink Springs	conekiller	Want-To-Buy Requests	8	03-03-2014 04:46 PM
STI Pink Springs	eddieEndo	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	20	01-07-2014 01:51 PM
BRZ STI Pink springs	JMPoole	Brakes, Suspension, Chassis	5	07-14-2013 07:59 PM

03-30-2018, 06:01 PM	#3
Decep Senior Member Join Date: May 2017 Drives: 2013 FR-S Series 10 Location: CA Posts: 1,061 Thanks: 166 Thanked 492 Times in 323 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Thanks? I tend not to post images directly since they sometimes make mobile viewing a pain in the ass.

03-30-2018, 06:29 PM	#4
.Kyle Member Join Date: May 2015 Drives: it's grey Location: Cave Creek, AZ Posts: 98 Thanks: 15 Thanked 39 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Subaru has colored their STi suspension parts cherry blossom red (pink) since the 90s. They are typically the standard part on the Japanese car and an accessory for the US market. Likely spring set B2010CA000.

03-31-2018, 05:27 AM	#6
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 966 Thanks: 387 Thanked 310 Times in 170 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	There are 3 different pink springs with different part numbers. One is aftermarket for US, one is aftermarket for JDM and one is stock for STi/tS models. Perhaps the third one are not branded...

03-31-2018, 02:57 PM	#7
Decep Senior Member Join Date: May 2017 Drives: 2013 FR-S Series 10 Location: CA Posts: 1,061 Thanks: 166 Thanked 492 Times in 323 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	That's a good point. I will just have to install them and see. More interested in the sachs dampers over my too-stiff-over-bad-roads 2013 showas tbh.

04-01-2018, 05:58 AM	#8
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 966 Thanks: 387 Thanked 310 Times in 170 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Oh, lowering is 10 mm for US Kit and 15 mm for JDM. Can you check what’s lowering for your set?

04-01-2018, 06:06 PM	#9
Decep Senior Member Join Date: May 2017 Drives: 2013 FR-S Series 10 Location: CA Posts: 1,061 Thanks: 166 Thanked 492 Times in 323 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I've no idea, though I wasn't even aware the TS or PP versions of the car are lowered. Gonna install them in a week or two. Going to install the 1mm thicker rear sway bar too since im changing to 2017 suspension.

04-02-2018, 05:03 AM	#10
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 966 Thanks: 387 Thanked 310 Times in 170 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	FYI, website says that aftermarket STi JDM springs are not compatible on STi cars...

04-02-2018, 05:26 PM	#11
Decep Senior Member Join Date: May 2017 Drives: 2013 FR-S Series 10 Location: CA Posts: 1,061 Thanks: 166 Thanked 492 Times in 323 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Yeah. The place I bought them from said it was from a BRZ STI (ts?) with 600miles. If they were aftermarket they'd have the sti logo on them I'd think.

04-10-2018, 06:07 PM	#12
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 966 Thanks: 387 Thanked 310 Times in 170 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	I got my pink springs today (JDM aftermarket); there are some paint spots, that identify spring type. Mine are 1 yellow and 1 white on front springs. Can you check if your OEM have same colors? If so, the spring is the same, just not branded.

04-10-2018, 06:40 PM	#13
chaoskaze The Fail Boat Join Date: Aug 2011 Drives: CWP S.B. Location: LasVegas Posts: 3,025 Thanks: 4,713 Thanked 1,291 Times in 871 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	I don't understand what you are trying to do, confirm they are off a tS? the damper itself already has the part number on it being sachs, but it's not the normal black spring. so it is the tS version. US version tS doesn't emphasis the STI logo on that car, there is either no sti marking or mostly blacked out. hope what i said helps. PS: If they wanna fuk around with you, i don't think anyone has the time to actually swap the srping out .... just for that...

User Name		Remember Me?
Password