Our Silver Bullet - FT-86 SpeedFactory - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FT-86 SpeedFactory · 08-04-2012, 07:53 PM

Car is home. Well has been home for a week now.

We are loving these cars. Both of our cars ( Firestorm Red is the other ) are going to be prepped for the corners, but in different ways to see what really works and what doesn't.

I have been using this for daily duty to get some miles on her. She just clicked off 1111 miles.

Anyway some photos of it stock to start the journal off right.

Wallpaper 1920x1080

Wallpaper 1680x1050

kendalldwhite · 08-04-2012, 07:55 PM

Very Very nice

FT-86 SpeedFactory · 08-07-2012, 10:31 AM

Some autox shots.

Lots of work to do, but baseline stock form this care is going to be very competitive after some light mods. Tires are junk but we all know that.

FT-86 SpeedFactory · 09-10-2012, 12:22 PM

Last week we attended the SCCA Solo Nationals in Lincoln, NE.

The male drivers in our seats ( Jeremy and John ) didn't do so hot. Jeremy coned his fastest east course which really hurt day two.

However our female driver took 1st.

Congratulations to Brooke who took home a 1st place Trophy in our FR-S from RTRL.

FT-86 SpeedFactory · 09-10-2012, 12:23 PM

Another update is our V1 Exhaust System due out in a couple weeks.

V1 BETA SPECS:
2.5" T304 Stainless Catback to Mufler
Minimal bends, as straight as possible
3.5" Stainless Angle Cut tips ( possible 4" on finial version you help decide )
Made in the U.S.A
V-Band Clamp for rear section
Up to a 7 Wheel HP Gain in the RPM range
Up to a 3 FT LB in Torque Gain in the RPM range
Doesn't annoy the Girlfriend / Wife

We are looking for your feedback to help make this exhaust one of the best out there for a daily driver / weekend warrior.

Pics

Videos

Start up and rev from exterior
[ame="http://www.youtube.com/watch?v=nhjkOvByLSI"]FT-86 Speed Factory V1 Exhaust - YouTube[/ame]

Drive by from exterior
[ame="http://www.youtube.com/watch?v=4175rHkAkAs"]FT-86 Speed Factory V1 Exhaust - Drive By - YouTube[/ame]

Interior video of launch and full throttle
[ame="http://www.youtube.com/watch?v=wmcj_SqTGmw"]FT-86 Speed Factory Catback Exhaust V1 - Launch - YouTube[/ame]

Interior video of normal driving conditions
[ame="http://www.youtube.com/watch?v=d7EAYQDPYDE"]FT-86 Speed Factory V1 Exhaust - Inside Driving - YouTube[/ame]

Dyno Video ( 4th gear )
[ame="http://www.youtube.com/watch?v=h8munnC0YHs"]FT - 86 SpeedFactory Scion FR-S dyno of our V1 exhaust - YouTube[/ame]

Dyno Chart ( 4th gear )

Guff · 09-10-2012, 12:33 PM

FT-86 SpeedFactory · 09-23-2012, 07:27 PM

Just a bit of an update.

At the SCCA Solo Nationals Brooke took home a 1st place Trophy in our FR-S. She was competing in the RTRL class. Congratulations to Brooke!

We have some goodies planned next week. Brake update, coils and maybe even some wheels for this thing finally.

_F-R-S_ · 09-23-2012, 08:27 PM

wouldnt mind 4" theres still alot of room back there

FT-86 SpeedFactory · 10-04-2012, 10:46 PM

Installed our Stage 2 Brake Package tonight. Testing tomorrow with video.

FT-86 SpeedFactory · 10-15-2012, 04:50 PM

Back from a time trial event. Videos, photos, review all coming soon.

Mods:
aFe Intake
Invidia N1
Fortune Auto Coilovers ( custom )
FT-86 SpeedFactory Strut Bar
FT-86 SpeedFactory Stage 2 brake package
Dunlop Star Specs 225 in width
T1R Oil Cap
T1R TI Shift knob

FT-86 SpeedFactory · 10-19-2012, 06:00 PM

Videos on track.

[ame="http://www.youtube.com/watch?v=__vWIgDgaeM"]FT86SpeedFactory at SCCA Time Trial - 2013 Scion FRS - YouTube[/ame]

[ame="http://www.youtube.com/watch?v=j93Xn7y8ZfA"]FT-86 SpeedFactory at MAM - Scion FRS Time Trial - YouTube[/ame]

Coilovers we used

FT-86 SpeedFactory · 10-22-2012, 10:54 AM

A shot from a drift even this weekend we went to. More to come on that.

FT-86 SpeedFactory · 11-12-2012, 09:12 PM

This review has been a long time coming. We have had The Fortune Auto V4 500 series installed in our silver FRS for 45 days or so now. We have done almost every form of racing with them as well. So, sit tight while I ramble on.

About Fortune:
JB Autosports / FT-86 SpeedFactory has worked with Fortune Auto for awhile now and I have nothing but good things to say about the staff. Everyone is incredibly knowledgeable and helpful at anytime.

Fortune Auto builds these coilovers to order for YOU. This means you get to pick the spring rates, the valving, and add extras like Swift springs, roller bearings, rear extenders and if you don't mind waiting, custom colors. Everything is assembled here in the USA with support you can ask questions to and get answers in plain English.

Just look at their latest video:
[ame="http://www.youtube.com/watch?v=qNWfaPhfPqA"]Fortune Auto - Behind The Build - YouTube[/ame]

About the Coils:
500 series coilovers incorporate a DIGRESSIVE piston, 24-step damping, custom rates & a one year warranty.

Dyno tested
Mono-Tube damper with high pressure nitrogen
24-step rebound adjustable dampers
Spherical Bearings
IP synthetic 5w or 10w shock oil (prevents cavitation and promotes superior heat dissipation)
6061 Forged & Anodized aluminum mounts and front camber plates
Height adjustment independent of pre-load
5 year Manufacturer's Warranty (1 year on piston)
Swift springs upgrade available
Rebuild-able in the USA
Re-valveable in the USA

Photo Time!

About the coils we installed:
We worked with Fortune and got a custom spring rate for our car. We use the vehicle for track days and some autocross duty so we needed something to assist with getting some quicker lap times.

Track
First test we did was hitting MAM outside of Omaha, NE. We were running an SCCA Time Trial event that weekend. The car had the Fortune Auto Coilovers, Dunlop Star Specs (225/45/17), DBA T3 Rotors, Hawk HP+ up front, stainless lines, and an aFe panel filter.

We ran the car fairly hard during qualifying and landed the car in the 6th position behind a LS1 Miata, Z06 Corvette, two Evos, and a 2011 STI. By the end of the sessions we finished 6th out of 14 all behind cars that there was no chance of catching. We were only .3 off 5th place which was that 2011 STI with KW's, and a ton more power so that was nice. When the Time Trial organizers applied the PAX they were using we landed 2nd overall behind that pesky Z06.

The coils preformed great. The car still had some weight transfer which I like. Overall a massive improvement.

Installed and then set ride height.

Video on Track:
[ame="http://www.youtube.com/watch?v=j93Xn7y8ZfA"]FT-86 SpeedFactory at MAM - Scion FRS Time Trial - YouTube[/ame]

AutoX
Then it was off to an Autocross where we ended up paxing in STX at the top. I took the car to a 6th over all PAX and Brooke our ladies driver finished 9th in PAX out of 48 drivers.

The car was way more solid than before without coils. Made autocrossing even more fun and way more competitive. Cannot wait to apply more suspension mods to this for next years STX campaign.

Some Photos from that event:

Drift
After that we went and held a Drift event for the local drifters and gave the car a shot around that course. We're not huge drifters ourselves but the car did what it needed to to get the job done and was a fun time.

Daily Drive
We have about 3000 miles on these coils with DD use in mind and it rides great. I've had people even say it still feels like a stock FRS for the daily commute, which is important. Not harsh at all for a coilover with the higher spring rates we choose. Have taken long road trips 300+ miles and not even a clue it's on coilovers which is the way it should be!

Installed Video covering a couple key features:
[ame="http://www.youtube.com/watch?v=dN_Pg5vqOf8"]Fortune Auto - Scion FRS and Subaru BRZ - YouTube[/ame]

Wrap Up
If you are on a budget, actually want a car that handles well, and want the adjust-ability of a coilover; then Fortune Auto's are for you. In our honest opinion for under $1200 these are the best coilover out there.

Any more questions comments, post them up. Here to answer.

diirk · 11-12-2012, 09:57 PM

Looks good. What spring rates are you running? or if unable to supply that info, what comes standard on the coilovers?

08-04-2012, 07:53 PM	#1
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Our Silver Bullet - FT-86 SpeedFactory Car is home. Well has been home for a week now. We are loving these cars. Both of our cars ( Firestorm Red is the other ) are going to be prepped for the corners, but in different ways to see what really works and what doesn't. I have been using this for daily duty to get some miles on her. She just clicked off 1111 miles. Anyway some photos of it stock to start the journal off right. Wallpaper 1920x1080 Wallpaper 1680x1050 Last edited by FT-86 SpeedFactory; 08-07-2012 at 10:29 AM.

11-12-2012, 09:12 PM	#13
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	This review has been a long time coming. We have had The Fortune Auto V4 500 series installed in our silver FRS for 45 days or so now. We have done almost every form of racing with them as well. So, sit tight while I ramble on. About Fortune: JB Autosports / FT-86 SpeedFactory has worked with Fortune Auto for awhile now and I have nothing but good things to say about the staff. Everyone is incredibly knowledgeable and helpful at anytime. Fortune Auto builds these coilovers to order for YOU. This means you get to pick the spring rates, the valving, and add extras like Swift springs, roller bearings, rear extenders and if you don't mind waiting, custom colors. Everything is assembled here in the USA with support you can ask questions to and get answers in plain English. Just look at their latest video: [ame="http://www.youtube.com/watch?v=qNWfaPhfPqA"]Fortune Auto - Behind The Build - YouTube[/ame] About the Coils: 500 series coilovers incorporate a DIGRESSIVE piston, 24-step damping, custom rates & a one year warranty. Dyno tested Mono-Tube damper with high pressure nitrogen 24-step rebound adjustable dampers Spherical Bearings IP synthetic 5w or 10w shock oil (prevents cavitation and promotes superior heat dissipation) 6061 Forged & Anodized aluminum mounts and front camber plates Height adjustment independent of pre-load 5 year Manufacturer's Warranty (1 year on piston) Swift springs upgrade available Rebuild-able in the USA Re-valveable in the USA Photo Time! About the coils we installed: We worked with Fortune and got a custom spring rate for our car. We use the vehicle for track days and some autocross duty so we needed something to assist with getting some quicker lap times. Track First test we did was hitting MAM outside of Omaha, NE. We were running an SCCA Time Trial event that weekend. The car had the Fortune Auto Coilovers, Dunlop Star Specs (225/45/17), DBA T3 Rotors, Hawk HP+ up front, stainless lines, and an aFe panel filter. We ran the car fairly hard during qualifying and landed the car in the 6th position behind a LS1 Miata, Z06 Corvette, two Evos, and a 2011 STI. By the end of the sessions we finished 6th out of 14 all behind cars that there was no chance of catching. We were only .3 off 5th place which was that 2011 STI with KW's, and a ton more power so that was nice. When the Time Trial organizers applied the PAX they were using we landed 2nd overall behind that pesky Z06. The coils preformed great. The car still had some weight transfer which I like. Overall a massive improvement. Installed and then set ride height. Video on Track: [ame="http://www.youtube.com/watch?v=j93Xn7y8ZfA"]FT-86 SpeedFactory at MAM - Scion FRS Time Trial - YouTube[/ame] AutoX Then it was off to an Autocross where we ended up paxing in STX at the top. I took the car to a 6th over all PAX and Brooke our ladies driver finished 9th in PAX out of 48 drivers. The car was way more solid than before without coils. Made autocrossing even more fun and way more competitive. Cannot wait to apply more suspension mods to this for next years STX campaign. Some Photos from that event: Drift After that we went and held a Drift event for the local drifters and gave the car a shot around that course. We're not huge drifters ourselves but the car did what it needed to to get the job done and was a fun time. Daily Drive We have about 3000 miles on these coils with DD use in mind and it rides great. I've had people even say it still feels like a stock FRS for the daily commute, which is important. Not harsh at all for a coilover with the higher spring rates we choose. Have taken long road trips 300+ miles and not even a clue it's on coilovers which is the way it should be! Installed Video covering a couple key features: [ame="http://www.youtube.com/watch?v=dN_Pg5vqOf8"]Fortune Auto - Scion FRS and Subaru BRZ - YouTube[/ame] Wrap Up If you are on a budget, actually want a car that handles well, and want the adjust-ability of a coilover; then Fortune Auto's are for you. In our honest opinion for under $1200 these are the best coilover out there. Any more questions comments, post them up. Here to answer. Last edited by FT-86 SpeedFactory; 11-12-2012 at 11:23 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drop In Filter Dyno Results - FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	241	08-20-2018 11:22 AM
FT-86 SpeedFactory - Firestorm Red - Build Thread	FT-86 SpeedFactory	Member's Car Journals	38	02-26-2015 02:42 PM
FT-86 SpeedFactory - Exclusive Source for FR-S / BRZ / GT-86 Parts!	FT-86 SpeedFactory	Announcements, Contests, Giveaways	10	08-02-2012 12:50 PM
>>>KW V3 Suspension<<<< IN STOCK - FT-86 SpeedFactory	FT-86 SpeedFactory	Brakes, Suspension, Chassis	8	07-31-2012 11:50 PM

08-04-2012, 07:55 PM	#2
kendalldwhite Senior Member Join Date: Jul 2012 Drives: Mint-Tiffany blue FRS Location: Beaumont TX Posts: 896 Thanks: 200 Thanked 187 Times in 132 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Very Very nice

08-07-2012, 10:31 AM	#3
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Some autox shots. Lots of work to do, but baseline stock form this care is going to be very competitive after some light mods. Tires are junk but we all know that.

09-10-2012, 12:22 PM	#4
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Last week we attended the SCCA Solo Nationals in Lincoln, NE. The male drivers in our seats ( Jeremy and John ) didn't do so hot. Jeremy coned his fastest east course which really hurt day two. However our female driver took 1st. Congratulations to Brooke who took home a 1st place Trophy in our FR-S from RTRL.

09-10-2012, 12:23 PM	#5
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Another update is our V1 Exhaust System due out in a couple weeks. V1 BETA SPECS: 2.5" T304 Stainless Catback to Mufler Minimal bends, as straight as possible 3.5" Stainless Angle Cut tips ( possible 4" on finial version you help decide ) Made in the U.S.A V-Band Clamp for rear section Up to a 7 Wheel HP Gain in the RPM range Up to a 3 FT LB in Torque Gain in the RPM range Doesn't annoy the Girlfriend / Wife We are looking for your feedback to help make this exhaust one of the best out there for a daily driver / weekend warrior. Pics Videos Start up and rev from exterior [ame="http://www.youtube.com/watch?v=nhjkOvByLSI"]FT-86 Speed Factory V1 Exhaust - YouTube[/ame] Drive by from exterior [ame="http://www.youtube.com/watch?v=4175rHkAkAs"]FT-86 Speed Factory V1 Exhaust - Drive By - YouTube[/ame] Interior video of launch and full throttle [ame="http://www.youtube.com/watch?v=wmcj_SqTGmw"]FT-86 Speed Factory Catback Exhaust V1 - Launch - YouTube[/ame] Interior video of normal driving conditions [ame="http://www.youtube.com/watch?v=d7EAYQDPYDE"]FT-86 Speed Factory V1 Exhaust - Inside Driving - YouTube[/ame] Dyno Video ( 4th gear ) [ame="http://www.youtube.com/watch?v=h8munnC0YHs"]FT - 86 SpeedFactory Scion FR-S dyno of our V1 exhaust - YouTube[/ame] Dyno Chart ( 4th gear )

09-23-2012, 07:27 PM	#7
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Just a bit of an update. At the SCCA Solo Nationals Brooke took home a 1st place Trophy in our FR-S. She was competing in the RTRL class. Congratulations to Brooke! We have some goodies planned next week. Brake update, coils and maybe even some wheels for this thing finally.

09-23-2012, 08:27 PM	#8
_F-R-S_ Banned Join Date: Aug 2012 Drives: 13 whiteout scion frs Location: Baltimore Posts: 1,261 Thanks: 621 Thanked 202 Times in 155 Posts Mentioned: 6 Post(s) Tagged: 3 Thread(s)	wouldnt mind 4" theres still alot of room back there

10-04-2012, 10:46 PM	#9
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Installed our Stage 2 Brake Package tonight. Testing tomorrow with video.

10-15-2012, 04:50 PM	#10
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Back from a time trial event. Videos, photos, review all coming soon. Mods: aFe Intake Invidia N1 Fortune Auto Coilovers ( custom ) FT-86 SpeedFactory Strut Bar FT-86 SpeedFactory Stage 2 brake package Dunlop Star Specs 225 in width T1R Oil Cap T1R TI Shift knob

10-19-2012, 06:00 PM	#11
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Videos on track. [ame="http://www.youtube.com/watch?v=__vWIgDgaeM"]FT86SpeedFactory at SCCA Time Trial - 2013 Scion FRS - YouTube[/ame] [ame="http://www.youtube.com/watch?v=j93Xn7y8ZfA"]FT-86 SpeedFactory at MAM - Scion FRS Time Trial - YouTube[/ame] Coilovers we used

10-22-2012, 10:54 AM	#12
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	A shot from a drift even this weekend we went to. More to come on that.

User Name		Remember Me?
Password