AP Racing "Sprint" BBK long term update - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

solidONE · 11-07-2013, 11:52 PM

Quote:

Originally Posted by OrbitalEllipses

Agreed, but I drove @thejevans 20 year old Miata with a dead clutch last night...more fun than you can have with a BRZ on the street.

Quote:

Originally Posted by Calum

I think ths belons here.

See, @CSG Mike! I told you Miatas are the best! What?!

coyote · 11-08-2013, 12:12 AM

Quote:

Originally Posted by Dave-ROR

Dude the rears haven't even generated enough heat to bake the paint off the pads yet

Thanks Dave. That's a pretty strong endorsement of Essex's decision not to develop a rear solution.

CSG Mike · 12-05-2013, 12:16 PM

I was recently PM'd with some questions.

No, don't run the rotors until they're this thin! We replaced ours when we saw this

PM us for pricing and specials, but please post questions in this thread so that we can share the knowledge with everyone!

ZionsWrath · 12-05-2013, 12:38 PM

THE BEST@!@!

ICantAffordAnLFA · 12-05-2013, 01:07 PM

Slightly off topic... Endurance kit love

The pro pilot who drives the car below in the BTCC ( significant limey racing series

) did a few laps of Silverstone in my BRZ on Sunday, and I quote him exactly ; "the brakes are very good; superb"

Dave-ROR · 12-05-2013, 01:27 PM

Quote:

Originally Posted by CSG Mike

I was recently PM'd with some questions.

No, don't run the rotors until they're this thin! We replaced ours when we saw this

PM us for pricing and specials, but please post questions in this thread so that we can share the knowledge with everyone!

Wuss.

Run them until they break

CSG Mike · 12-05-2013, 01:29 PM

Quote:

Originally Posted by Dave-ROR

Wuss.

Run them until they break

You want me to post something don't you

Dave-ROR · 12-05-2013, 01:30 PM

Quote:

Originally Posted by CSG Mike

You want me to post something don't you

LOL not really.

Just saying that I still would have run those rotors you removed. I guess I should have said "until they crack through and through"

In the Brembo world they suggest 31MM as min thickness for a 32MM rotor, but that's crazy talk

I've seen them run much further without issue. Of course I'm not that smart... sooo...

CSG Mike · 12-05-2013, 01:32 PM

Quote:

Originally Posted by Dave-ROR

LOL not really.

Just saying that I still would have run those rotors you removed. I guess I should have said "until they crack through and through"

Dave-ROR · 12-05-2013, 01:35 PM

Quote:

Originally Posted by CSG Mike

Remember I only removed that one on mine because it cracked through (you do have a crack in that one but I'm not sure if it's through the disc?). The otherwise was arguably (based on pics only) as worn as yours. I replaced it because I had 4 spares and didn't feel like messing with it later since I already had it off the car.

Jeff already covered my desire to abuse brakes to the point of failure

CSG Mike · 12-05-2013, 01:39 PM

Quote:

Originally Posted by Dave-ROR

Remember I only removed that one on mine because it cracked through (you do have a crack in that one but I'm not sure if it's through the disc?). The otherwise was arguably (based on pics only) as worn as yours. I replaced it because I had 4 spares and didn't feel like messing with it later since I already had it off the car.

Jeff already covered my desire to abuse brakes to the point of failure

I see your crack and raise you... shattered?

We really do test products as thoroughly as we can; this failure is NOT normal. This was done on the 400hp CSG S2k.

Dave-ROR · 12-05-2013, 01:59 PM

Quote:

Originally Posted by CSG Mike

I see your crack and raise you... shattered?

We really do test products as thoroughly as we can; this failure is NOT normal. This was done on the 400hp CSG S2k.

Yeah you failed on that one worse than I've ever failed with any brake system.

I did bust a caliper seal (rebuilt ITR not an AP one!) this weekend.

CSG David · 12-05-2013, 07:25 PM

Quote:

Originally Posted by Dave-ROR

Yeah you failed on that one worse than I've ever failed with any brake system.

I did bust a caliper seal (rebuilt ITR not an AP one!) this weekend.

I don't know if I should take this as a compliment or LMAO statement...hahaha

Obviously a testament of how fast our setups run...

Dave-ROR · 12-06-2013, 12:51 PM

Quote:

Originally Posted by CSG David

I don't know if I should take this as a compliment or LMAO statement...hahaha

Obviously a testament of how fast our setups run...

LOL I still think that was a defective rotor. Not saying you guys aren't fast, but that's just too much of a failure to be normal since I'm pretty confident that you guys actually inspect your rotors at least once a day during a DE.

12-05-2013, 01:07 PM	#47
ICantAffordAnLFA Senior Member Join Date: May 2012 Drives: Brz, Legacy Location: London, England Posts: 320 Thanks: 36 Thanked 120 Times in 66 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Slightly off topic... Endurance kit love The pro pilot who drives the car below in the BTCC ( significant limey racing series ) did a few laps of Silverstone in my BRZ on Sunday, and I quote him exactly ; "the brakes are very good; superb" __________________ Trackday ride with built motor Mods: Going, Stopping, Handling Parts: CP, Pauter, Sprintex, Ecutek, Milltek, STI, Rays, Defi, Essex AP Racing, Bilstein, Whiteline, Perrin, RacerX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
This is how much we like our AP Racing/Essex "Sprint" BBK...	CSG Mike	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	4	05-06-2013 11:30 AM
Question about Long-Term "Garaging"	arleewa	BRZ First-Gen (2012+) -- General Topics	25	01-12-2013 09:13 PM
Some FR-S "news" (pricing update)	Sport-Tech	CANADA	19	03-24-2012 10:31 PM
Hyundai Calls 2011 Sonata Turbo "Very Delicious," Reveals Near-Term Future Plans	vh_supra26	Other Vehicles & General Automotive Discussions	1	02-19-2010 02:53 PM

12-05-2013, 12:16 PM	#45
CSG Mike Join Date: Jul 2012 Drives: S2000 CR Location: Orange County Posts: 14,530 Thanks: 8,920 Thanked 14,177 Times in 6,835 Posts Mentioned: 966 Post(s) Tagged: 14 Thread(s)	I was recently PM'd with some questions. No, don't run the rotors until they're this thin! We replaced ours when we saw this PM us for pricing and specials, but please post questions in this thread so that we can share the knowledge with everyone!

12-05-2013, 12:38 PM	#46
ZionsWrath Thanks Join Date: Apr 2013 Drives: BRZ Location: NY Posts: 4,163 Thanks: 5,989 Thanked 3,100 Times in 1,498 Posts Mentioned: 38 Post(s) Tagged: 3 Thread(s)	THE BEST@!@!

User Name		Remember Me?
Password