Adjustable Front Anti Roll Bar Endlinks for BRZ and FR-S - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

HP Autowerks · 10-11-2012, 07:16 PM

When you lower the vehicle, the swaybar is moved from the ideal factory geometry to an offset that decreases the ability of the swaybar to perform. The swaybar frame mount and the end of the bar should be on the same horizontal plane. The factory endlinks are a solid piece. When the car is lowered, the OEM links cannot compensate for the longer length needed to keep the swaybar in its ideal location. Get immediate response from your sway bar and precise control over your suspension. What this means to you is tighter, more responsive handling.

HP Autowerks is happy to introduce adjustable endlinks for your Subaru BRZ and Scion FR-S. With adjustable endlinks you can return the bar to its ideal leverage point while lowered. They also afford the peace of mind that the links or shock link mount will not fail as is common in factory units, as they will now be adjusted properly. The links are adjustable in length up to an additional 1.25" over stock. HP Autowerks end links are adjustable while on the vehicle.

simpleisbest · 10-11-2012, 09:23 PM

What's the shaft made of and are the size of the included bolts/shaft wrench flat metric?
Thanks!

fatoni · 10-11-2012, 09:39 PM

theres a classified segment for this type of thing

mike2100 · 10-11-2012, 09:46 PM

Quote:

Originally Posted by fatoni

theres a classified segment for this type of thing

He didn't post a price, so it's ok

OP, how much can one lower these cars before needing to compensate the end link length? The suspension geometry was apparently designed to be perfect when sitting 20mm lower than stock; I wonder if that includes the length of the end links.

HP Autowerks · 10-11-2012, 10:05 PM

Quote:

Originally Posted by mike2100

He didn't post a price, so it's ok

OP, how much can one lower these cars before needing to compensate the end link length? The suspension geometry was apparently designed to be perfect when sitting 20mm lower than stock; I wonder if that includes the length of the end links.

This is a product release so the community knows what is new out there for the BRZ and FR-S.

Any suspension movement in either direction will move the anti roll bar geometry outside of the most ideal position. Adjustable endlinks will get you back to where the geometry is perfect and to take full advantage of the anti roll bar.

chutrain · 10-11-2012, 11:17 PM

This looks pretty good. Any better pictures of the ends?

HP Autowerks · 10-12-2012, 01:19 PM

Quote:

Originally Posted by simpleisbest

What's the shaft made of and are the size of the included bolts/shaft wrench flat metric?
Thanks!

1018 mild steel

HP Autowerks · 10-12-2012, 01:30 PM

Quote:

Originally Posted by chutrain

This looks pretty good. Any better pictures of the ends?

This one should be nice and clear!

Danzzt231 · 10-13-2012, 04:23 AM

THK balljoint?

HP Autowerks · 10-15-2012, 07:03 PM

Quote:

Originally Posted by Danzzt231

THK balljoint?

Yes, you are correct.

celica73 · 10-15-2012, 09:06 PM

Do they have left and right threads on them, or does one end have to be removed in order to adjust the length?

HP Autowerks · 10-16-2012, 02:43 AM

Quote:

Originally Posted by celica73

Do they have left and right threads on them, or does one end have to be removed in order to adjust the length?

LH and RH threads. The endlinks are adjustable mounted, no need to remove them.

Danzzt231 · 10-17-2012, 01:45 AM

Quality stuff the THK balljoint.

HP Autowerks · 11-07-2012, 09:05 PM

Bump!

10-11-2012, 07:16 PM	#1
HP Autowerks Member Join Date: Aug 2012 Drives: BMW 1M, Subaru BRZ Location: Santa Barbara Posts: 53 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Adjustable Front Anti Roll Bar Endlinks for BRZ and FR-S When you lower the vehicle, the swaybar is moved from the ideal factory geometry to an offset that decreases the ability of the swaybar to perform. The swaybar frame mount and the end of the bar should be on the same horizontal plane. The factory endlinks are a solid piece. When the car is lowered, the OEM links cannot compensate for the longer length needed to keep the swaybar in its ideal location. Get immediate response from your sway bar and precise control over your suspension. What this means to you is tighter, more responsive handling. HP Autowerks is happy to introduce adjustable endlinks for your Subaru BRZ and Scion FR-S. With adjustable endlinks you can return the bar to its ideal leverage point while lowered. They also afford the peace of mind that the links or shock link mount will not fail as is common in factory units, as they will now be adjusted properly. The links are adjustable in length up to an additional 1.25" over stock. HP Autowerks end links are adjustable while on the vehicle. Attached Images Last edited by HP Autowerks; 10-12-2012 at 01:29 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Anti-Roll Kit - Press Release	FT-86 SpeedFactory	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	19	07-24-2017 04:55 AM
NEW EIBACH ANTI-ROLL KIT! SPECIAL PRICING!	genometuning	Brakes, Suspension, Chassis	1	10-01-2012 01:07 PM
Front Endlinks	goke186	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	11	08-31-2012 01:16 AM
Roll stiffness: Springs vs anti-roll bars?	Captain Snooze	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	31	07-24-2012 05:44 PM
is it necessary to change anti-roll bar?	yuli8466	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	17	06-25-2012 10:58 AM

10-11-2012, 09:23 PM	#2
simpleisbest Senior Citizen Join Date: May 2012 Drives: Scion FR-S Location: So. Cal Posts: 571 Thanks: 143 Thanked 186 Times in 121 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	What's the shaft made of and are the size of the included bolts/shaft wrench flat metric? Thanks!

10-11-2012, 09:39 PM	#3
fatoni Senior Member Join Date: Apr 2011 Drives: miata, mazdaspeed protege, ls430 Location: socal Posts: 4,416 Thanks: 599 Thanked 1,442 Times in 787 Posts Mentioned: 28 Post(s) Tagged: 0 Thread(s)	theres a classified segment for this type of thing

10-13-2012, 04:23 AM	#9
Danzzt231 Member Join Date: Aug 2012 Drives: GT86 Location: Unknown Posts: 32 Thanks: 10 Thanked 5 Times in 5 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	THK balljoint?

10-15-2012, 09:06 PM	#11
celica73 Senior Member Join Date: Jun 2012 Drives: '13 BRZ / '11 Outback / '06 Tundra Location: Durham NC Posts: 510 Thanks: 6 Thanked 155 Times in 104 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Do they have left and right threads on them, or does one end have to be removed in order to adjust the length?

10-17-2012, 01:45 AM	#13
Danzzt231 Member Join Date: Aug 2012 Drives: GT86 Location: Unknown Posts: 32 Thanks: 10 Thanked 5 Times in 5 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Quality stuff the THK balljoint.

11-07-2012, 09:05 PM	#14
HP Autowerks Member Join Date: Aug 2012 Drives: BMW 1M, Subaru BRZ Location: Santa Barbara Posts: 53 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Bump!

User Name		Remember Me?
Password