WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1707 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

strat61caster · 09-28-2022, 03:35 PM

Quote:

Originally Posted by Ultramaroon

I'm two months into a 2gr-fe rebuild. Timing cover is going back on tonight. Only way to be sure is to DIY. Good luck! Keep us posted.

Sorry I haven’t been keeping up, is it going into the 86? That’s pretty rad either way, really underrated engine unless you pay attention to what Lotus does with it lol.

Ultramaroon · 09-28-2022, 05:19 PM

Quote:

Originally Posted by strat61caster

Sorry I haven’t been keeping up, is it going into the 86? That’s pretty rad either way, really underrated engine unless you pay attention to what Lotus does with it lol.

Unrelated to the 86. They are great powerplants. Modular design is wonderful and I am a die-hard fan of hydraulic lash adjustment.

It's my daughter's ES350. Hubby drove it for ten miles without an accessory belt.

soundman98 · 09-28-2022, 09:50 PM

Quote:

Originally Posted by Ultramaroon

Unrelated to the 86. They are great powerplants. Modular design is wonderful and I am a die-hard fan of hydraulic lash adjustment.

It's my daughter's ES350. Hubby drove it for ten miles without an accessory belt.

i would force the hubby to aid in it's repair...

soundman98 · 09-28-2022, 09:51 PM

Quote:

Originally Posted by blsfrs

Sounds like the voice of experience. Do you do private parties?

for the right price

Dab · 09-28-2022, 11:37 PM

Took my new-to-me 2013 FRS on an enjoyable day trip:

Stephen W. · 09-29-2022, 01:23 PM

Quote:

Originally Posted by Dab

Took my new-to-me 2013 FRS on an enjoyable day trip:

That can't be Ontario. I don't see any pot holes or lumpy/broken up cold patch sections.

LRNAD90 · 09-29-2022, 02:46 PM

Quote:

Originally Posted by Dab

Took my new-to-me 2013 FRS on an enjoyable day trip:

Looks like Heaven to me right about now. Hope you enjoyed it..

soundman98 · 09-29-2022, 05:57 PM

Quote:

Originally Posted by Stephen W.

That can't be Ontario. I don't see any pot holes or lumpy/broken up cold patch sections.

come on now, he's a professional photogapher. he either hid them behind the car during setting up for the shoot, or photoshopped them out

Dab · 09-29-2022, 09:15 PM

Quote:

Originally Posted by Stephen W.

That can't be Ontario. I don't see any pot holes or lumpy/broken up cold patch sections.

Haha! It's the foothills of Alberta.

Dab · 09-29-2022, 09:19 PM

Quote:

Originally Posted by LRNAD90

Looks like Heaven to me right about now. Hope you enjoyed it..

More than you can imagine! Well, maybe not, given that you're on this forum.

Drove the same route last summer in my now-sold bmw e82. Had far more fun yesterday.

arxm · 09-29-2022, 10:32 PM

did quite a bit, got fresh tires, got a very good deal on bilsteins for the car, figured since i'm in the suspension might as well refresh most of the bushings, got a custom tune and re-installed my splitter, been a busy few days haha, finally got a beater for the winter so I don't have to feel bad about putting all the aero back on. Im tired of losing parts to the 401

keenanok · 09-30-2022, 02:05 AM

put a 25mm hub centric spacer on the back and they made the wheels sit pretty flush

MJones_RB · 09-30-2022, 01:21 PM

Quote:

Originally Posted by keenanok

put a 25mm hub centric spacer on the back and they made the wheels sit pretty flush

Looks perfect!

WNDSRFR · 10-01-2022, 12:37 PM

Changed my rear brake pads. I had a set laying around since the last time I was going to replace them. But my lug studs stripped and after dealing with that I wasn't in the mood to do anything else.
But once you have the wheels off, it's the easiest job I've ever done. Just need to remove one bolt, swing the caliper out of the way, and replace the pads.
Nothing to it. And the brakes even still work!

09-28-2022, 11:37 PM	#23889
Dab Member Join Date: Mar 2017 Drives: 2013 FRS Argento Location: Canada Posts: 17 Thanks: 7 Thanked 26 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Took my new-to-me 2013 FRS on an enjoyable day trip: Attached Images

09-29-2022, 10:32 PM	#23895
arxm Senior Member Join Date: Jan 2017 Drives: 2013 FR-S, 2023 BRZ Location: Toronto Posts: 248 Thanks: 108 Thanked 74 Times in 46 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	did quite a bit, got fresh tires, got a very good deal on bilsteins for the car, figured since i'm in the suspension might as well refresh most of the bushings, got a custom tune and re-installed my splitter, been a busy few days haha, finally got a beater for the winter so I don't have to feel bad about putting all the aero back on. Im tired of losing parts to the 401 __________________ 2013 Whiteout FRS 6MT with a JRSC RS Pulley @ 500ish WHP 2023 Ignition Red BRZ 6MT awaiting boost

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM

09-30-2022, 02:05 AM	#23896
keenanok Member Join Date: May 2022 Drives: 2013 Whiteout FR-S Location: Las Vegas Posts: 24 Thanks: 4 Thanked 43 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	put a 25mm hub centric spacer on the back and they made the wheels sit pretty flush

10-01-2022, 12:37 PM	#23898
WNDSRFR Senior Member Join Date: Jan 2014 Drives: FR-S,GTI Location: Cocoa, Florida Posts: 1,155 Thanks: 228 Thanked 823 Times in 419 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Changed my rear brake pads. I had a set laying around since the last time I was going to replace them. But my lug studs stripped and after dealing with that I wasn't in the mood to do anything else. But once you have the wheels off, it's the easiest job I've ever done. Just need to remove one bolt, swing the caliper out of the way, and replace the pads. Nothing to it. And the brakes even still work!

User Name		Remember Me?
Password