SOCAL: Local FS/FT

[MyGT86Yas]

GONE

[scottxnizzle]

Originally Posted by scottxnizzle

PART OUT SALE

Just parted ways with my BRZ, I have new and used parts for sale

Shoot me a PM for price and questions! I'm located in Oxnard, CA.

New:
$250 REXPEED Carbon Fiber STI Style Front Lip/Splitter (2013-2016 BRZ)
$140 Toyota OEM GT86 LHD Arm Rest

Used:
$40 Rays Wheels 35mm 12x1.25 Lug Nuts (Blue)
SOLD $400 Password JDM Carbon Fiber Progressive Wing
SOLD $40 Subaru OEM Sunshade w/ storage bag

BUMP! OBO please take my stuff! Can meet in San Diego Area! Thanks!

[Thunder86]

WTS Work M.C.O. Racing Type CS 18x8.5 +38 (comes in Work “Blood Red”)

Wheels are wrapped in 245/35/18 Continental ExtremeContact DWS06

Set up will come with: OEM TPMS, Work license plate frames (2), Work M.C.O. wheel decal/sticker sheet, and a set of Kyo-ei Bull Lock Tuskey lug locks

Wheels were fully ceramic coated right out of the box. Wheels & tires have about 16k miles on them. Condition is 8/10 due to daily driving rash, however, they have never been curbed, tracked, autocrossed, etc.

Ran these with stock struts + TRD springs with -1.7 camber front and -1.5 camber rear... had ZERO rubbing issues and fitment is flush!

Links: https://www.ft86speedfactory.com/wor...l#.XgxZNySIaEc ... https://m.tirerack.com/tires/tires.j...06XL&tab=Sizes

This setup would cost about $2800 new. Would like to sell full kit for $1600 obo.

Local pick-up only for now.

[brzgabriel47]

Selling a set of OEM 2017+ Subaru BRZ LED Fog Lights. Includes Fog Lights, Bezels, and needed connectors as included from 86Speed. Located in Hemet, CA. $175 picked up or $185 shipped.

[Weapon86]

Cash local pick up or can meet at a reasonable distance from San Fernando Valley area. firm on prices. Thanks text (424)three33-two35four

Delicious Tuning Flex Fuel Kit $500
- with race upgrade AN fuel lines
- used for approx 6k miles
- not sure if these would work on other model year's o2 sensor port but this is for a 2014.

DeatschWerks DW300c fuel pump $100
Used for approx 6k miles

DeatschWerks 700cc fuel injectors $200
- used for approx 6k miles

Cusco Power Brace $140
- good condition. Will come with all hardware to install

Cusco LCA brand new never installed $450

MXP Frontpipe $50
- would need to use a regular gasket from midpipe to front pipe. spot where donut gasket goes was cut off. please see attached photo.

Perrin Crank Pulley $50

[Industrial_gt86]

[QUOTE=Industrial_gt86;3242437]I’ve got two item’s for sale

- Tomei OP (NEW) $200

- Perrin rear shift rod bushing (NEW) $20



I


Bump


Sent from my iPhone using Tapatalk

[KungFuWaffle]

WTS: Brand new in the box SPC Rear LCA, bought them brand new and never used them since my Upper control arm was enough camber for me. Selling for $200, lower than any site selling them. Picked up in Irvine

[Thunder86]

Originally Posted by Thunder86

WTS Work M.C.O. Racing Type CS 18x8.5 +38 (comes in Work “Blood Red”)

Wheels are wrapped in 245/35/18 Continental ExtremeContact DWS06

Set up will come with: OEM TPMS, Work license plate frames (2), Work M.C.O. wheel decal/sticker sheet, and a set of Kyo-ei Bull Lock Tuskey lug locks

Wheels were fully ceramic coated right out of the box. Wheels & tires have about 16k miles on them. Condition is 8/10 due to daily driving rash, however, they have never been curbed, tracked, autocrossed, etc.

Ran these with stock struts + TRD springs with -1.7 camber front and -1.5 camber rear... had ZERO rubbing issues and fitment is flush!

Links: https://www.ft86speedfactory.com/wor...l#.XgxZNySIaEc ... https://m.tirerack.com/tires/tires.j...06XL&tab=Sizes

This setup would cost about $2800 new. Would like to sell full kit for $1800 obo.

Local pick-up only for now.

Bump!

Need these gone~~

[Decimus]

For sale: SPL Rear Lower Control Arms. Will include new grade 10 hardware (locking nuts & flanged bolts). $425 picked up in LA. Price is firm.

[89_Manny]

Originally Posted by 89_Manny

For SALE.
Located in Riverside County, but I work in Garden Grove.

Eibach SPORTLINE Kit (Set of 4 Springs) has roughly 45k miles on it. Missing one front bump stop $120



OEM Sway Bars off ‘13 Fr-S. All bushings included $60


Rear all weather mats. $20


BUMP

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

[Thaeyo]

Yokohama Super Advan Racing v.2 SA3R (DISCONTINUED)

Discontinued for 10-15 years now. Rare to find in 5x100. Bought new wheels so I have no use for these anymore. Some rockchips, slight curb rash on 2 wheels (see pics). Wheels ONLY, no tires. Includes 63.1mm to 56.1mm hubcentric rings for Subaru owners.

Yokohama Super Advan Racing v.2 SA3R
Size: 18x8
Offset: +38
PCD: 5x100
Bore Size: 63.1 mm
Weight: Approx 19-20 lbs. (RPF1 18-18.5 lbs for same size)
MSRP: $3000

Location: Orange County, CA

SOLD

[Clutch Dog]

Selling AP Racing Sprint kit. Fronts only
Full kit with 2 sets of pads. Used rotors and stainless lines
I sent the calipers off for refresh and inspection just as a cursory move. No issues found and they are ready for the next car
Asking 1800 but will take good offers.

AST/WHITELINE MAXG Coilovers W/ 6k Swift Springs, and helper springs
comes with Verus Engineering Camber Plates and whiteline custom endlinks for the front shocks
-1800

Whiteline Sway bars
20mm Front Fixed - 100
20mm Front Adjustable - 100
16mm Rear Adjustable - 100

BSK020 sway bar kitI: 20mm front and 16mm rear with endlinks and the rear lateral connectors - 250.00

Located in San Diego

[HahaJasp]

Looking for coils. preferably under $700.


Sent from my iPhone using Tapatalk

[HahaJasp]

Originally Posted by HahaJasp

Looking for coils. preferably under $700.


Sent from my iPhone using Tapatalk

also looking for headers. preferably uel


Sent from my iPhone using Tapatalk