Clutch Replacment? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dububster · 05-24-2023, 11:38 PM

For those who may still be curious what the issue was. I ended up taking it to a super reputable shop and had them drop the trans. The issue ended up being the clutch. It was installed improperly when it was replaced 15k miles ago and the clutch plates were bent and not making proper contact with the flywheel. I’ll leave some pictures, you can clearly see the inside of the clutch plate looks new and the outside is worn. If you live in the Bay Area I couldn’t recommend CM Autohaus more!

Tokay444 · 05-25-2023, 08:14 AM

Can you expand on, "installed incorrectly..."?

Dububster · 05-25-2023, 01:54 PM

Quote:

Originally Posted by Tokay444

Can you expand on, "installed incorrectly..."?

Not more than what the mechanic told me unfortunately. He just said that the clutch disc were likely bent during installation. I asked if it could be caused by bad driving and he said he didn’t think so.

EndlessAzure · 05-25-2023, 03:45 PM

Quote:

Originally Posted by Tokay444

Can you expand on, "installed incorrectly..."?

If I had to guess, the input shaft didn't get aligned properly then forced together by tightening the bell housing

RZNT4R · 05-26-2023, 05:55 AM

Quote:

Originally Posted by EndlessAzure

If I had to guess, the input shaft didn't get aligned properly then forced together by tightening the bell housing

Probably not, in that case the input shaft bearing would be damaged. Usually when a clutch disc is installed the wrong way 'round the, hub doesn't clear the flywheel bolts and the clutch can't even release. I can imagine a pressure plate being incorrectly mounted, but why? I have a hard time imagining when the guy could possibly have done so the clutch would wear only on the outside.

But facts remain facts, that clutch disc was obviously not rubbing right.

blsfrs · 05-26-2023, 09:36 AM

When the previous clutch work was done, was the flywheel replaced or was the old one resurfaced?

Dububster · 05-26-2023, 02:45 PM

Quote:

Originally Posted by blsfrs

When the previous clutch work was done, was the flywheel replaced or was the old one resurfaced?

I believe it was resurfaced the last time. Replaced this time.

blsfrs · 05-26-2023, 05:40 PM

Quote:

Originally Posted by Dububster

I believe it was resurfaced the last time. Replaced this time.

That's probably where the problem occurred. I've seen several posts where the machining was done incorrectly. Most issues were with vibration.

05-24-2023, 11:38 PM	#15
Dububster Member Join Date: Sep 2019 Drives: 2013 BRZ Location: Bay Area Posts: 66 Thanks: 46 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	For those who may still be curious what the issue was. I ended up taking it to a super reputable shop and had them drop the trans. The issue ended up being the clutch. It was installed improperly when it was replaced 15k miles ago and the clutch plates were bent and not making proper contact with the flywheel. I’ll leave some pictures, you can clearly see the inside of the clutch plate looks new and the outside is worn. If you live in the Bay Area I couldn’t recommend CM Autohaus more! Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine sound generator replacment..... plug and play	Master Jedi	GR86 General Topics (2nd Gen 2022+ Toyota 86)	11	04-02-2022 01:04 PM
Vibration after Clutch Replacment	AT-JeffT	Engine, Exhaust, Transmission	12	03-10-2020 08:09 PM
Windshield replacment vendor referrals	jeepmor	Northwest	2	07-09-2014 07:03 AM
BRZ Premium Reflector Replacment	Jimmylightning	Cosmetic Modification (Interior/Exterior/Lighting)	1	11-20-2013 11:35 PM
6x9's Stealth install - rear speaker replacment	GTS86	Electronics \| Audio \| NAV \| Infotainment	7	10-16-2013 09:55 AM

05-25-2023, 08:14 AM	#16
Tokay444 Anti stance. Join Date: Feb 2016 Drives: 17 White 860. RCE Tarmac 2. RE-71RS Location: Not Canada Posts: 1,629 Thanks: 897 Thanked 956 Times in 546 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Can you expand on, "installed incorrectly..."?

05-26-2023, 09:36 AM	#20
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,107 Thanks: 1,719 Thanked 905 Times in 471 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	When the previous clutch work was done, was the flywheel replaced or was the old one resurfaced?

User Name		Remember Me?
Password