Vorshlag LSX kit - Page 52 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

chaoscentral · 10-27-2016, 07:56 AM

Quote:

Originally Posted by MRS-Colin

The end goal of this is to have the vehicle report the emissions readiness tests from the GM PCM to any standard device. As far as "spoofing" remissions readiness checks, this won't be anything we can or will provide. If the GM PCM would report the emissions tests as passing, the vehicle through the DLC will report them as well.

Ok, that's awesome, and was also the answer I was hoping to hear. Thanks :-)

cf6mech · 10-27-2016, 11:18 AM

Quote:

Originally Posted by ILLSMOQ

Sounds like you got this pretty well figured out, we should see quite a few swaps this year.

This is pretty much a done deal , and in a cost effective emmisions passing as close to OEM way possible , those holding out to do the swap because of this have no excuse now. This technology is not can or manufacturer specific (import swaps are just a small portion of this market, off road enthusiasts have been waiting for this too)....it's can to can.....can to non-can.....or visa versa.....the magic is not so much in the device but in the work no one else but Colin seems to want to do and make it available to us mortals LOL!..... A shout out also needs to go to Colin's Boss Franz , who has allowed Colin to pursue this bug a boo that seems to stifle most everybody in the industry, when much bigger more lucrative solutions for his company need to be pursued.

DustinS · 10-28-2016, 11:57 AM

[ame="http://www.youtube.com/watch?v=qCQTkrXJXaM"]This Week at Vorshlag, Oct 27, 2016[/ame]

Sounds like they are about ready to release the kit

ILLSMOQ · 10-28-2016, 12:45 PM

Quote:

Originally Posted by cf6mech

A shout out also needs to go to Colin's Boss Franz , who has allowed Colin to pursue this bug a boo that seems to stifle most everybody in the industry, when much bigger more lucrative solutions for his company need to be pursued.

I was wondering about that...pretty awesome that these guys are helping us out with this.

ILLSMOQ · 10-28-2016, 12:57 PM

Quote:

Originally Posted by DustinS

Sounds like they are about ready to release the kit

impressive! We got the right guys building a kit for us that's for sure.

cf6mech · 10-28-2016, 03:46 PM

Quote:

Originally Posted by ILLSMOQ

impressive! We got the right guys building a kit for us that's for sure.

If any of you are on the fence about who do go with as far as kit parts and electronic solutions ,let me share some of their backgrounds, as I'm a curious guy and ask questions, some times to my detriment , , Vorschlag owner and partners are degreed engineers, both Aero Space and mechanical , Mrs Electronics owner in their small branch office in Dayton has a PH.D in Physics and worked for Daimler Benz in Germany in research and development among many other things, amazing humble guy.... So you got some serious minds behind making a V8 work in a small Japanese car with these two companies , very easy choice for me.....it's like over kill, but I like over kill LOL!

jvincent · 10-28-2016, 04:01 PM

This seems appropriate after @cf6mech's post.

MRS-Colin · 10-28-2016, 04:46 PM

Franz is an interesting guy to be around for sure.

C130NAV · 10-29-2016, 11:58 AM

Screw the Kit I want some aftermarket stuff to fit around the damn engine. LMAO!! Hurry up so I can add to my wish list. :-P

DustinS · 11-17-2016, 03:51 PM

Kind of apprehensive about posting this here, but more people are subscribed here. What do you think about this set-up plus an LS3 Fluidampr and Water Pump.

Driver Side Pulley Bracket

Low Mount Alternator Driver Side

Low Mount Mini-A/C Bracket

Zer0 · 11-18-2016, 07:17 PM

Looks good now put the post back up from yesterday by Vorshlag.

ILLSMOQ · 11-18-2016, 08:34 PM

Where did it go?

DustinS · 11-19-2016, 11:41 AM

Looks like all of his posts are now gone. Either he deleted them before he got banned while trying to work on Vendor status or Admin deleted them.

Zer0 · 11-19-2016, 07:22 PM

@DustinS It looks like that accessorie set up is for the truck crank pulley. The spacing is not what you want for this swap if it does use the truck pulley. If they have the Corvette setup it's the shortest other than running a Ls4 pulley not sure what combo of parts work best. Vorshlag knows

10-28-2016, 11:57 AM	#717
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,538 Thanked 1,412 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	[ame="http://www.youtube.com/watch?v=qCQTkrXJXaM"]This Week at Vorshlag, Oct 27, 2016[/ame] Sounds like they are about ready to release the kit __________________

10-28-2016, 04:46 PM	#722
MRS-Colin Senior Member Join Date: Jun 2016 Drives: 2001 Impreza 2.5 RS Location: Dayton, Ohio, USA Posts: 139 Thanks: 14 Thanked 293 Times in 98 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Franz is an interesting guy to be around for sure. __________________ Colin Beck

11-17-2016, 03:51 PM	#724
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,538 Thanked 1,412 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Kind of apprehensive about posting this here, but more people are subscribed here. What do you think about this set-up plus an LS3 Fluidampr and Water Pump. Driver Side Pulley Bracket Low Mount Alternator Driver Side Low Mount Mini-A/C Bracket __________________

11-19-2016, 11:41 AM	#727
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,538 Thanked 1,412 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Looks like all of his posts are now gone. Either he deleted them before he got banned while trying to work on Vendor status or Admin deleted them. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: KW V3 Coilovers w/ Vorshlag Front Camber Plates	Steeze_Its	Brakes, Suspension, Chassis	7	06-27-2014 09:32 PM
FS: Vorshlag Front Camber Plates	h4nh	Brakes, Suspension, Chassis	1	03-01-2014 10:49 PM
FS: KW V3 w/ Vorshlag camber plates & oem stock suspension (SF bay area)	serial gixxer	Brakes, Suspension, Chassis	18	05-20-2013 08:51 PM
WTB: Front Vorshlag Camber Plates	YDNA	Brakes, Suspension, Chassis	0	05-03-2013 05:31 PM
Maybe a repost, but have you seen the Vorshlag project car?	Bart1	BRZ First-Gen (2012+) -- General Topics	3	01-07-2013 01:19 PM

10-28-2016, 04:01 PM	#721
jvincent Senior Member Join Date: Sep 2013 Drives: 2022 WRB BRZ Sport-Tech Location: Ottawa, Canada Posts: 1,746 Thanks: 131 Thanked 1,410 Times in 715 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	This seems appropriate after @cf6mech's post.

10-29-2016, 11:58 AM	#723
C130NAV Senior Member Join Date: Dec 2013 Drives: Whiteout 6Sp FR-S Location: East Boston Posts: 320 Thanks: 81 Thanked 80 Times in 60 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Screw the Kit I want some aftermarket stuff to fit around the damn engine. LMAO!! Hurry up so I can add to my wish list. :-P

11-18-2016, 07:17 PM	#725
Zer0 Senior Member Join Date: Sep 2015 Drives: 2015 frs Location: Ca Posts: 511 Thanks: 426 Thanked 196 Times in 148 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Looks good now put the post back up from yesterday by Vorshlag.

11-18-2016, 08:34 PM	#726
ILLSMOQ Senior Member Join Date: Oct 2016 Drives: 2017 WR BLUE BRZ Location: San Jose Posts: 641 Thanks: 608 Thanked 502 Times in 249 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Where did it go?

11-19-2016, 07:22 PM	#728
Zer0 Senior Member Join Date: Sep 2015 Drives: 2015 frs Location: Ca Posts: 511 Thanks: 426 Thanked 196 Times in 148 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	@DustinS It looks like that accessorie set up is for the truck crank pulley. The spacing is not what you want for this swap if it does use the truck pulley. If they have the Corvette setup it's the shortest other than running a Ls4 pulley not sure what combo of parts work best. Vorshlag knows

User Name		Remember Me?
Password