|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
AIM4APX
Join Date: Jun 2012
Drives: 2013 WRB BRZ Limited
Location: Milwaukee
Posts: 1,206
Thanks: 642
Thanked 749 Times in 324 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
Whiteline transmission bushing and Perrin shifter bushing review.
I installed these on Nov 25th, so I've had a little bit of time to get a feel for the changes to the car since install.
Install: Very easy for both pieces because I was using a lift. The transmission mount would have been ok using stands but the shifter bushing required some force to remove and replace and being on your back might make it a struggle. Transmission bushing review: This piece is fantastic. The feel of the car changes immediately after it is installed. Gone is any slop in the transmission especially from same gear power on/of/on situations that used to jerk/bounce the driveline assembly. Because of the position of the mount, and what it's attached to I do notice a tiny bit of vibration when the car is under power. The best way to explain this is that you feel more connected to the motor/trans so when you are revving you can slightly feel it in your seat. It really adds a tiny bit of rawness to the car that it didn't have before. At higher RPM this feeling is increased a bit more and those who haven't driven with poly mounts before might be a bit unnerved as the vibration increases from 5500-7000 RPM. I love it, others might find it too raw. Shifter bushing review: Can't feel any change. There might be a small change, and maybe if I just installed it w/o the transmission bushing it would be noticeable, but until the car has 75K on it and the OEM bushing is worn, I don't see any point in changing this out.
__________________
"It's very difficult to present technology as an overtly positive sales device to people who want an emotional car" -Chris Harris
|
![]() |
![]() |
The Following 9 Users Say Thank You to Superhatch For This Useful Post: | 1strwdcar (12-09-2012), AZP Installs (12-09-2012), boredom.is.me (12-10-2012), gmookher (12-09-2012), gonzo (12-13-2012), Jaylyons1 (07-16-2013), schtebie (12-12-2012), Slartibartfast (12-12-2012), whataboutbob (01-13-2013) |
![]() |
#2 |
Nice Review!
![]() -Mike Paisan ![]() ![]() ![]() ![]() 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs "Race Tested, Enthusiast Approved!" |
|
![]() |
![]() |
|
|
![]() |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Perrin Rear Shifter Bushing Install | F1point4 | DIY (Do-It-Yourself) Guides | 55 | 10-21-2021 03:39 PM |
Installed the Whiteline transmission bushing(no pics sorry) | gmookher | Engine, Exhaust, Transmission | 9 | 06-27-2013 03:30 AM |
FS: Perrin Rear Shifter Bushing | green_comet | Australia Classifieds | 2 | 11-07-2012 03:04 AM |