WHAT DID YOU DO TO YOUR BRZ TODAY?

[HiXxY]

Originally Posted by Poodles

Installed from FT Eighty Six:
- License plate LED assemblies
- Door courtesy light LED assemblies
- Super BAD Stage 3 dome light (still dims like factory, can also be adjusted on brightness AND it's crazy bright on full setting)


Installed from The Retrofit Source
- XB LED fog light assemblies was yellow Lamin-X film (these things are just a hair dimmer than the HID headlights, totally worth the price and they bolt right in!) Had to get adapter harnesses from Spoonz Auto.
- Trunk LED light


From HID Powerhouse:
- JDM clear front side markers with their brightest amber LED. Took a sharpie to the base of the bulbs to cover up the yellow plastic as it showed when they were off. Definitely brighter than stock and look great.


Still waiting to go on:
- XB LED front turn signals from TRS, just waiting on my Tapturn to come in.


No pics as the car is dirty Damn pollen everywhere and just enough rain to make it look terrible.

I was thinking about getting the same fog lights. How is the fitment? Is there any gaps around the bezel? I know it's really hard to take pix of lights but do you have any output pix?

[Drakiv]

What mods do you have? I want a torque curve like that, because I can definitely feel the dip hard right now

Originally Posted by DocWalt

I did some MAF scaling today, did some more logging and still need to lean it out a bit for WOT stuff. Needs a tiny bit of tweaking in the part throttle stuff, but it's definitely made a nice improvement. I also added Shiv's JDL UEL VVT tweaks, which definitely seems to make a touch smoother power delivery.

edit: may as well throw in a virtual dyno run for shiggles. I'm not sure it feels like a 197hp car, but it's definitely satisfying. No massive torque dip like stock either

[Drakiv]

awesome steering wheel, where did you get it from and how much?

Originally Posted by BRZeer

Prova steering wheel came in the mail today. Feels great in the hands. Comfy.grippy.fuzzyAttachment 106602Attachment 106603Attachment 106604�� happy camper


Sent from my iPhone using Tapatalk

[DocWalt]

Originally Posted by Drakiv

What mods do you have? I want a torque curve like that, because I can definitely feel the dip hard right now

JDL UEL header. Expensive, but worth every penny, IMO. Stock midpipe & muffler too

[Poodles]

Originally Posted by HiXxY

I was thinking about getting the same fog lights. How is the fitment? Is there any gaps around the bezel? I know it's really hard to take pix of lights but do you have any output pix?

Fitment is perfect, it's a direct plug and play swap (so long as you have the adapter harness for the wiring). I'll try to get some pics soon.

[s30series]

Originally Posted by brz604

Installed!! Can definitely hear a difference especially in the low rpm range. Car threw a CEL warning at first but after driving around for about 5-10km, the light went away. Can't wait for headers next.

What a bad, bad, bad move

[JS + BRZ]

Just test fitting it. Bayson R STi style sideskirts.

What do you guys think? I always wanted these side skirts.

[JPxM0Dz]

SMD engine bay mod

[dar3d3vil]

Originally Posted by JPxM0Dz

SMD engine bay mod

Honestly, I love the way that looks. How difficult was that kit to install?

[JPxM0Dz]

Originally Posted by dar3d3vil

Honestly, I love the way that looks. How difficult was that kit to install?

Installation is very straight forward. The biggest thing was routing all the wiring so it looks clean. Here's a link to the kit I used, it's inexpensive and a very affective way to light up the engine bay when desired. Available in white or blue... http://www.ebay.com/itm/OPT7-Plasma-...39f007&vxp=mtr

[chanomatik]

Originally Posted by JS + BRZ

Just test fitting it. Bayson R STi style sideskirts.

What do you guys think? I always wanted these side skirts.

I've had mine for a while and I love them. They're not as nice as the authentic ones, obviously, but they're clean and cheap. The whole kit is a worthwhile investment if you live anywhere that gives your car a beating (climates that see varied weather conditions).

Thanks for adding the STI emblem on yours! I've been sitting on mine for almost 18 months now. I need to apply them, and now I'm more determined to do so!

[srizzors25]

Originally Posted by JPxM0Dz

Installation is very straight forward. The biggest thing was routing all the wiring so it looks clean. Here's a link to the kit I used, it's inexpensive and a very affective way to light up the engine bay when desired. Available in white or blue... http://www.ebay.com/itm/OPT7-Plasma-...39f007&vxp=mtr

I actually really like it my inner ricer is like "fuck yea!" engine bay is very clean man nice work

[srizzors25]

Originally Posted by JS + BRZ

Just test fitting it. Bayson R STi style sideskirts.

What do you guys think? I always wanted these side skirts.

Personally I like the CS style extensions but the series blue style naturally fits the car. Looks good man

[JPxM0Dz]

Originally Posted by srizzors25

I actually really like it my inner ricer is like "fuck yea!" engine bay is very clean man nice work

Yeah as ricey as they seem, they're very functional at lighting up the engine bay at night. I guess you could go with the white version and it wouldn't be considered as ricey. Not likes it underglow LOL