02-11-2023, 03:08 PM | #1 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,283 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
SOLD Stoptech Front 355mm / Rear 345mm BBKs
SOLD
Swapped to 17" wheels and PP brakes for tire choice and classing reasons so I am selling my old BBK as the front kit won't fit under basically any off the shelf 17" wheel. I've test fit the rear 345 under a 17x9 +35 TC105 and 17x9.5 EC7R, both have clearance for days so I am guessing it'd fit nearly any PP clearing 17" wheel. Pads are CSG C2 with a significant amount of pad depth left front and rear. Rotors are good and have the usual surface cracking, no lip, etc. I very strongly recommend getting new brake lines, but they are included. All required bolts are included too. They calipers are difficult to clean without damaging the paint so I didn't try real hard as soon as I realized simple green and brake cleaner were corrosive to it. The black marks on the front calipers are from tire rubber getting stuck between the wheel/caliper on track. Two dust boots in one of the front calipers got a bit crispy and are cracked/torn. Piston sizes are 38mm / 34mm front and 38mm rear Dust boots: https://www.zeckhausen.com/catalog/p...roducts_id=422 https://www.zeckhausen.com/catalog/p...roducts_id=210 Asking Prices Front Kit: $x Rear Kit: $x Both Kits: $x With respect to shipping - it'd be roughly 115lb and 36" x 16" x 16" for both kits in one box. Might be cheaper / easier to separate into two boxes.
__________________
Last edited by RedReplicant; 02-27-2023 at 11:18 PM. |
02-20-2023, 07:34 PM | #2 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,283 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Anyone want these things? Make me an offer
__________________
|
02-24-2023, 06:29 PM | #3 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,283 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Price drop
__________________
|
02-24-2023, 06:54 PM | #4 |
Member
Join Date: Jul 2020
Drives: 2014 Subaru BRZ DGM Limited
Location: Notre Dame, IN and Chicago, IL
Posts: 30
Thanks: 16
Thanked 17 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I want this so bad, but getting this means getting a new set of wheels and tires as well. $$$
|
The Following User Says Thank You to fryfun For This Useful Post: | RedReplicant (02-25-2023) |
02-24-2023, 07:12 PM | #5 |
Senior Member
Join Date: Jun 2014
Drives: frs
Location: Gunsai
Posts: 4,906
Thanks: 7,308
Thanked 2,945 Times in 1,785 Posts
Mentioned: 23 Post(s)
Tagged: 2 Thread(s)
|
|
02-25-2023, 03:15 AM | #6 |
Junior Member
Join Date: Jun 2022
Drives: 2022 White BRZ manual
Location: CA
Posts: 6
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
this is such a good deal. You're not going to find a better BBK for this price. The C2 pads are superb as well.
|
The Following User Says Thank You to mcbat68 For This Useful Post: | RedReplicant (02-25-2023) |
02-25-2023, 09:06 AM | #7 |
Member
Join Date: Jul 2020
Drives: 2014 Subaru BRZ DGM Limited
Location: Notre Dame, IN and Chicago, IL
Posts: 30
Thanks: 16
Thanked 17 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
02-25-2023, 04:17 PM | #8 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,283 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Yeah, the 18" constraint is hard to stomach but it is a great kit. There are SOME 17" wheels that fit, but usually they require the combination of the right spacers to move the wheel barrel widest spot relative to the caliper.
This is behind my 17x9.5 EC7R without any spacers, would probably BARELY clear with the right spacer size... but it'd also really not end well if you ovaled a wheel lol.
__________________
|
02-27-2023, 11:18 PM | #9 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 942
Thanks: 1,504
Thanked 1,283 Times in 541 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Sold
__________________
|
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
StopTech ST-40 328mm and 355mm Big Brake Kit Sale! | Xero-Limit | Brakes, Suspension, Chassis | 1 | 04-10-2019 09:40 AM |
Stoptech 355mm BBK | D K | Brakes, Suspension, Chassis | 3 | 05-15-2018 05:44 PM |
Almost brand new Stoptech 355mm BBK | D K | Brakes, Suspension, Chassis | 21 | 06-15-2016 11:43 PM |
FS- Stoptech BBK 355mm | Rickg87 | Brakes, Suspension, Chassis | 11 | 04-23-2015 09:37 PM |
FS- Stoptech BBK 355mm | Rickg87 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 03-31-2015 06:54 PM |