IAG Extreme 700hp Long Block, JDL Turbo Kit, and more - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DBlum425 · 10-14-2019, 11:46 AM

Here is the story. I had a built fa20 making 500whp on a precision 5858. I then decided to switch up the turbo kit and get a garret 3076. I installed everything, made 545 on e85 on the dyno, then decided to refresh the engine. Pulled the engine, sent it to IAG. Half way through them building it, I got a deal on a GTE VVTI 2jz that I couldnt pass up. So, here we are. I have a brand new IAG extreme stage 3 block and a full turbo kit that is almost brand new. Im hoping to get this stuff in the hands of someone who will make some crazy power.

The block is LA sleeved with a fresh bore and hone, has Pauter forged rods, the new IAG 10:1 pistons, all new kings bearings, block and head freshly decked and copper o-ringed. Head is ported and has big valve spring kit along with all new retainers, guides, and seals. Entire block has been hot tanked and vapor honed. Crank heat treated, polished, and balanced. Also have tons of extras that will come with it. Brand new timing cover and reimax high flow oil pump, coolant fittings with -16 an fittings welded on for radiator and -8 for turbo feed and return. All sensors, timing parts, etc.

If you would like the IAG engine blueprint just let me know.

As for the turbo parts, I have a v2 IAG vband manifold and downpipe that are both ceramic coated. Also have charge piping (made by kellybuilt) also ceramic coated. Vibrant 600hp intercooler core with tanks made by kellybuily with bash bar. Custom catch can made by kellybuilt. Plus tial wastegate and BOV. The manifold, downpipe, charge piping, and intercooler only did a few dyno runs and thats it. Can toss in 1000cc ID injectors also. I have sold the oil pan and intake manifold from the included picture. Turbo also not included. But I will include any couplers, clamps, fittings, etc that you may need to install.

Im looking for 8k for the IAG block and 2250 for all the turbo parts. Shipping would be extra. Let me know if you have any questions.

free image hosting

DBlum425 · 10-20-2019, 05:05 AM

Bump

DBlum425 · 10-31-2019, 02:09 PM

Bump

buglinjo · 11-01-2019, 01:39 AM

When you come down to 5k for the block lmk :3

DatGoodBRZ · 11-01-2019, 09:14 PM

Would you sell that catch can?

DBlum425 · 11-03-2019, 08:06 PM

Quote:

Originally Posted by DatGoodBRZ

Would you sell that catch can?

Yes, 275+ shipping

Kinda bored tbh · 11-26-2019, 10:11 PM

So that intercooler how does it work I have a full blown kit as well and am interested on how you route the piping and what not and if you will sell it also not sure if you want to sell one of the turbos but I’d be interested for sure just let me know.

RD1428 · 11-29-2019, 09:48 AM

Pmd you

DBlum425 · 11-29-2019, 11:40 AM

Block is sold, turbo kit available.

kev0 · 11-29-2019, 12:48 PM

Can we get a video on that new running engine when you get it on the car?

DBlum425 · 11-29-2019, 01:49 PM

The IAG block or the 2j? IAG block is up to the new owner, 2j is still a good year or two away from running.

majixmatrix · 12-13-2019, 03:23 PM

Does this come with the bash bar intercooler support? Also how much to ship the turbo kit to 01501?

DBlum425 · 12-23-2019, 02:23 PM

Quote:

Originally Posted by majixmatrix

Does this come with the bash bar intercooler support? Also how much to ship the turbo kit to 01501?

Yes I will include the bash bar, Ill do the whole kit shipped for 2300!

majixmatrix · 01-09-2020, 02:40 PM

Dang that's a great price! I actually recently picked up somebody's kit locally. Glws!!!

Quote:

Originally Posted by DBlum425

Yes I will include the bash bar, Ill do the whole kit shipped for 2300!

10-14-2019, 11:46 AM	#1
DBlum425 Member Join Date: Dec 2017 Drives: 2013 Subaru BRZ Location: California Posts: 32 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	IAG Extreme 700hp Long Block, JDL Turbo Kit, and more Here is the story. I had a built fa20 making 500whp on a precision 5858. I then decided to switch up the turbo kit and get a garret 3076. I installed everything, made 545 on e85 on the dyno, then decided to refresh the engine. Pulled the engine, sent it to IAG. Half way through them building it, I got a deal on a GTE VVTI 2jz that I couldnt pass up. So, here we are. I have a brand new IAG extreme stage 3 block and a full turbo kit that is almost brand new. Im hoping to get this stuff in the hands of someone who will make some crazy power. The block is LA sleeved with a fresh bore and hone, has Pauter forged rods, the new IAG 10:1 pistons, all new kings bearings, block and head freshly decked and copper o-ringed. Head is ported and has big valve spring kit along with all new retainers, guides, and seals. Entire block has been hot tanked and vapor honed. Crank heat treated, polished, and balanced. Also have tons of extras that will come with it. Brand new timing cover and reimax high flow oil pump, coolant fittings with -16 an fittings welded on for radiator and -8 for turbo feed and return. All sensors, timing parts, etc. If you would like the IAG engine blueprint just let me know. As for the turbo parts, I have a v2 IAG vband manifold and downpipe that are both ceramic coated. Also have charge piping (made by kellybuilt) also ceramic coated. Vibrant 600hp intercooler core with tanks made by kellybuily with bash bar. Custom catch can made by kellybuilt. Plus tial wastegate and BOV. The manifold, downpipe, charge piping, and intercooler only did a few dyno runs and thats it. Can toss in 1000cc ID injectors also. I have sold the oil pan and intake manifold from the included picture. Turbo also not included. But I will include any couplers, clamps, fittings, etc that you may need to install. Im looking for 8k for the IAG block and 2250 for all the turbo parts. Shipping would be extra. Let me know if you have any questions. free image hosting Last edited by DBlum425; 10-14-2019 at 11:07 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Long block help?	zoth	Engine, Exhaust, Transmission	2	03-26-2018 12:21 PM
WTB: FA20 Long Block/Short Block blown/running	The Racers Line	Engine, Exhaust, Bolt-Ons	7	07-29-2014 01:26 AM
WTB: FA20 Short Block or Blown Long Block	The Racers Line	Want-To-Buy Requests	1	06-29-2014 05:21 PM
WTB: short block or long block	DOTman05	Engine, Exhaust, Bolt-Ons	2	07-14-2013 06:48 AM

10-20-2019, 05:05 AM	#2
DBlum425 Member Join Date: Dec 2017 Drives: 2013 Subaru BRZ Location: California Posts: 32 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Bump

10-31-2019, 02:09 PM	#3
DBlum425 Member Join Date: Dec 2017 Drives: 2013 Subaru BRZ Location: California Posts: 32 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Bump

11-01-2019, 01:39 AM	#4
buglinjo Junior Member Join Date: Mar 2018 Drives: Scion FR-S White Location: Bayonne, NJ Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	When you come down to 5k for the block lmk :3

11-01-2019, 09:14 PM	#5
DatGoodBRZ Senior Member Join Date: Nov 2012 Drives: 2013 SWP BRZ Ltd. Location: Texas Posts: 194 Thanks: 14 Thanked 18 Times in 14 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Would you sell that catch can?

11-26-2019, 10:11 PM	#7
Kinda bored tbh Member Join Date: Aug 2019 Drives: 2016 brz Location: Va Posts: 31 Thanks: 3 Thanked 8 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	So that intercooler how does it work I have a full blown kit as well and am interested on how you route the piping and what not and if you will sell it also not sure if you want to sell one of the turbos but I’d be interested for sure just let me know.

11-29-2019, 09:48 AM	#8
RD1428 Senior Member Join Date: Sep 2012 Drives: 2013 Scion FRS Location: CA/NH Posts: 209 Thanks: 16 Thanked 44 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Pmd you

11-29-2019, 11:40 AM	#9
DBlum425 Member Join Date: Dec 2017 Drives: 2013 Subaru BRZ Location: California Posts: 32 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Block is sold, turbo kit available.

11-29-2019, 12:48 PM	#10
kev0 Senior Member Join Date: Feb 2018 Drives: '14 Location: Midwest Posts: 485 Thanks: 246 Thanked 99 Times in 76 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Can we get a video on that new running engine when you get it on the car?

11-29-2019, 01:49 PM	#11
DBlum425 Member Join Date: Dec 2017 Drives: 2013 Subaru BRZ Location: California Posts: 32 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	The IAG block or the 2j? IAG block is up to the new owner, 2j is still a good year or two away from running.

12-13-2019, 03:23 PM	#12
majixmatrix BRZ Wannabee Join Date: Jan 2017 Drives: 2013 Limited BRZ Location: Worcestor, MA Posts: 94 Thanks: 4 Thanked 4 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does this come with the bash bar intercooler support? Also how much to ship the turbo kit to 01501?

User Name		Remember Me?
Password