ST Coilovers *Review from the Beginning*

[8R6]

Originally Posted by EightSix93

Did you do anything else? Like install LCA and end links and etc? Or still just coilovers?


Sent from my iPhone using Tapatalk

just coilovers. i had camber bolts in my previous setup, but since the ST's come with slotted upper holes, i just reused the stock bolts and maxed out the camber in the front. i actually got my alignment redone today and my fronts are -2.0 deg and rears are -2.7 deg. i lowered it almost another inch from my previous setup, so it's about 2 inches lower than stock. i might raise my rears just a little to gain a bit more height and gain a tiny bit of camber back and also to give my car a slightly "rake" look too. car handles amazing right now though. firm ride but not harsh. the extra negative camber i got dialed in also helps it corner like a dream.

[jabongga]

qeustion to everyone, will I need rear LCA if max drop with 18x8.75 +33 offset with 235/40/18 tires?

[exE36M3]

So any input on these guys for track days? Or auto-x?