Gruppe M / Revolution garage intake - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sherb · 11-11-2015, 12:28 AM

Great gains! But way too expensive for just an intake.

Wouldnt expect anything less of Gruppe-M and a company like Revolution.

Looks like you have solid gains through out the dyno. Amazing how you got these numbers when it was this hot too. Would like to see how it does with similar temps and with that Revolution TB.

Jing · 11-11-2015, 03:49 AM

Quote:

Originally Posted by jaorocks1

What's your take on the intake? Review?

whats more impressive to me is the response i got from the setup. That is something that dyno's cannot measure. Not sure how much of that is the airbox and how much of that is the TB though. Having a voluminous intake box is usually important in providing response as well.

It made the car feel a lot more alive to be honest. It still isnt there though and needs some polishing up in-terms of tune.

Sherb · 11-12-2015, 01:47 PM

I would get this only if it was used at a big price cut. 2000 dollars plus shipping taxes and custom fees will easily make this's couple hundred more.

I love this design though. Snorkels are a great alternative though

kingkenny · 11-29-2015, 12:27 AM

Thanks for the info !! The revolution intake with big throttle body , look like the best intake setup to me !!

PeterFRS · 09-10-2016, 09:50 AM

is there any numbers for this setup with TB and intake ?

Dr. BRZ · 11-07-2018, 12:36 PM

Quote:

Originally Posted by mokinbird87

I am speechless that this intake is in my hands

only true ram air design for frs/brz platform. Crappy cellphone photos do not do justice for this piece.. Can't wait till I install it! I will be doing a before/after dyno. This intake is more about keeping the horsepower under high stress conditions (according to some Japanese reviews, every 1 degrees Celsius you lose 0.7hp), but just want to see if it actually makes any difference. stay tuned.

Bro! Any updates! I am seriously considering this, the price is down to $1500 shipped!

eastendraceshop · 11-09-2018, 01:57 PM

This is the most EPIC intake for this platform IMO!

-Sam

Hawk77FT · 11-10-2018, 10:59 PM

I simply could not bring myself to spending that much and built one myself.

eastendraceshop · 11-11-2018, 12:57 AM

Quote:

Originally Posted by Hawk77FT

I simply could not bring myself to spending that much and built one myself.

Do you have pics?

Hawk77FT · 11-11-2018, 07:06 PM

Quote:

Originally Posted by eastendraceshop

Do you have pics?

Yeah, of course. I have few installed as well. Need to get them off my phone.

Until then, here it is.

Name: IMAG3108.jpg
Views: 1145
Size: 182.6 KB

PuslarBrrrz · 11-12-2018, 12:13 PM

Quote:

Originally Posted by Hawk77FT

Yeah, of course. I have few installed as well. Need to get them off my phone.

Until then, here it is.

Attachment 172452

Damn impressive.

Hawk77FT · 11-13-2018, 10:35 PM

Here are couple of more pictures installed. I only installed it a month ago and very happy with it. I haven't dyno it yet.

Name: IMAG3160.jpg
Views: 1118
Size: 208.8 KB

Name: IMAG3160.jpg
Views: 1118
Size: 208.8 KB

Name: IMAG3277.jpg
Views: 1424
Size: 192.4 KB

eastendraceshop · 11-15-2018, 08:33 PM

Quote:

Originally Posted by Hawk77FT

Here are couple of more pictures installed. I only installed it a month ago and very happy with it. I haven't dyno it yet.

Attachment 172516

Attachment 172517

Pretty awesome. I'm assuming that you used carbon fiber for the whole construction of the intake? (not just a top layer)

Hawk77FT · 11-17-2018, 07:30 AM

Quote:

Originally Posted by eastendraceshop

Pretty awesome. I'm assuming that you used carbon fiber for the whole construction of the intake? (not just a top layer)

Well, because it involved a lot of cutting and changing, I used fiberglass and a top layer of carbon. At a later date, I will make a mold and build it from scratch completely out of CF (hopefully by then i will get a small autoclave)

11-11-2015, 12:28 AM	#57
Sherb Member Join Date: Oct 2015 Drives: Brz Location: San Diego Posts: 31 Thanks: 48 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Great gains! But way too expensive for just an intake. Wouldnt expect anything less of Gruppe-M and a company like Revolution. Looks like you have solid gains through out the dyno. Amazing how you got these numbers when it was this hot too. Would like to see how it does with similar temps and with that Revolution TB. Last edited by Sherb; 11-11-2015 at 12:39 AM.

09-10-2016, 09:50 AM	#61
PeterFRS Senior Member Join Date: May 2014 Drives: FRS Location: NorthofBorder Posts: 236 Thanks: 82 Thanked 81 Times in 60 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	is there any numbers for this setup with TB and intake ? __________________ '14 Scion FRS Tein Flex TE37

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gruppe-S Unequal length header UEL - good power, excellent sound/quality - must SEE!	Gruppe-s	Engine, Exhaust, Bolt-Ons	680	12-26-2022 09:46 PM
Centering caps for the TC105N from Gruppe-s	cjd	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	44	11-09-2021 03:57 AM
revolution garage rear subframe solid bushings review	mokinbird87	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	07-01-2015 10:09 AM
Gruppe-S	tahdizzle	User/Vendor/Sponsor Reviews, Feedback, Comments	13	05-06-2015 11:30 AM
Revolution x GruppeM Intake	TwinRz	Engine, Exhaust, Transmission	15	07-31-2014 07:34 PM

11-12-2015, 01:47 PM	#59
Sherb Member Join Date: Oct 2015 Drives: Brz Location: San Diego Posts: 31 Thanks: 48 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I would get this only if it was used at a big price cut. 2000 dollars plus shipping taxes and custom fees will easily make this's couple hundred more. I love this design though. Snorkels are a great alternative though

11-29-2015, 12:27 AM	#60
kingkenny Member Join Date: Mar 2015 Drives: 2014 Toyota GT86 Location: Duabi , U.A.E Posts: 64 Thanks: 34 Thanked 23 Times in 18 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks for the info !! The revolution intake with big throttle body , look like the best intake setup to me !!

11-09-2018, 01:57 PM	#63
eastendraceshop Senior Member Join Date: Oct 2018 Drives: '13 Scion FR-S & '17 Toyota 86 Location: Chino, CA Posts: 798 Thanks: 406 Thanked 228 Times in 165 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	This is the most EPIC intake for this platform IMO! -Sam

11-10-2018, 10:59 PM	#64
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 475 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	I simply could not bring myself to spending that much and built one myself.

11-13-2018, 10:35 PM	#68
Hawk77FT Senior Member Join Date: Jul 2012 Drives: GTS 86 Location: Australia Posts: 989 Thanks: 873 Thanked 475 Times in 272 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	Here are couple of more pictures installed. I only installed it a month ago and very happy with it. I haven't dyno it yet.

User Name		Remember Me?
Password