So I went over a curb - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

carson.frs · 01-17-2023, 03:46 AM

The other night I went over a curb in a parking garage which I really couldn’t see with my window tint, but besides the point, I didn’t notice till today the fender actually shifted it seems up and slightly outward from what I can tell.

I’m wondering if you guys recommend anything on fixing this or if I should just take it to a body shop and see what they can do. How much do you guys think it’ll cost to repair through a body shop? I’m gonna look more at the damage tomorrow but I think I’ll be more careful turning corners in parking garages now ��

Wally86 · 01-17-2023, 06:47 AM

The bottom mount for the fender is at the pinch weld. I bet if you crawl under your car, you'll see it's smashed up pretty good. Just my guess. Might be cheap but looking at the bow in the fender, probably not.

Grady · 01-17-2023, 07:44 AM

Take it apart and look for bent things. From there we can tell how much to fix.

Opie · 01-17-2023, 07:58 AM

Easy, there is a bracket on the fender that bolts to the body behind the door. See circle in pic, it's a 10mm bolt accessable in the door jam with the door open. Look there, and under the car directly below for bends. I'd bet both the bracket and the pinch weld are tweaked slightly.

Loosen the 10mm fender bracket bolt but don't remove it. If the pinch weld is bent adjust that first. You can use pliers, or a hammer to straighten the pinch weld. Use a towel, or block of wood to help protect the paint. Once the pinch weld is straight, then gently adjust the fender bracket to bring the fender back in line with the door. Once satisfied, retighten the bolt.

Probably will take about 30 minutes to fix...or a body shop will charge you $300-$500

carson.frs · 01-17-2023, 09:52 AM

Ok yeah I saw that bracket yesterday so I’ll definitely mess with that and pinch weld. Definitely gonna do it myself cause I’m not paying a shop $500 to do a relatively easy job. Thanks for the feedback everyone!

Spuds · 01-17-2023, 06:12 PM

Don't bend or stress the fender itself too much. The paint might crack. You might want to loosen the top bolts while you are messing with the fender.

Yes, this has happened to me.

pope · 01-17-2023, 08:15 PM

Quote:

Originally Posted by carson.frs

which I really couldn’t see with my window tint, but besides the point

Incorrect. The obstructed visibility is the point. This time it was a curb, next time could be serious.

Get the fender fixed and lose the tint.

Spairo · 01-17-2023, 08:55 PM

Quote:

Originally Posted by pope

Get the fender fixed and lose the tint.

Amen to this.

Sent from my SM-G990U2 using Tapatalk

Grady · 01-17-2023, 09:26 PM

Quote:

Originally Posted by pope

lose the tint.

But its cool and that kid should have not been in the intersection anyway.

soundman98 · 01-17-2023, 11:28 PM

Quote:

Originally Posted by Grady

But its cool and that kid should have not been in the intersection anyway.

it only counts if someone screams

x808drifter · 01-18-2023, 07:08 AM

Quote:

Originally Posted by soundman98

it only counts if someone screams

That's what loud exhaust/sounds are for right?

FRSBRZGT86FAN · 01-18-2023, 07:12 AM

Quote:

Originally Posted by carson.frs

The other night I went over a curb in a parking garage which I really couldn’t see with my window tint, but besides the point, I didn’t notice till today the fender actually shifted it seems up and slightly outward from what I can tell.

I’m wondering if you guys recommend anything on fixing this or if I should just take it to a body shop and see what they can do. How much do you guys think it’ll cost to repair through a body shop? I’m gonna look more at the damage tomorrow but I think I’ll be more careful turning corners in parking garages now ��

Quote:

Originally Posted by pope

Incorrect. The obstructed visibility is the point. This time it was a curb, next time could be serious.

Get the fender fixed and lose the tint.

+1 on fixing your tint, your tint must not be legal if you couldn't see a simple curb or you need more awareness when slow speed driving.Either way you having to fix it will be enough of a deterrent to avoid this next time.

If you've got front windshield tint across the whole window you're already breaking the law and bringing unnecessary police attention to your vehicle.

Windshield: Non-reflective tint is allowed above the manufacturer's AS-1 line or top 4 inches.
Front Side windows: Must allow more than 35% of light in.
Back Side windows: Any darkness can be used. Rear Window: Any darkness can be used.

Source: https://www.tinting-laws.com/utah/
Copyright © Tinting-Laws.com

01-17-2023, 03:46 AM	#1
carson.frs Member Join Date: Nov 2022 Drives: 2014 FRS Location: Utah Posts: 16 Thanks: 0 Thanked 16 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	So I went over a curb The other night I went over a curb in a parking garage which I really couldn’t see with my window tint, but besides the point, I didn’t notice till today the fender actually shifted it seems up and slightly outward from what I can tell. I’m wondering if you guys recommend anything on fixing this or if I should just take it to a body shop and see what they can do. How much do you guys think it’ll cost to repair through a body shop? I’m gonna look more at the damage tomorrow but I think I’ll be more careful turning corners in parking garages now ��

01-17-2023, 06:47 AM	#2
Wally86 Be Kind Join Date: Apr 2020 Drives: 2020 86 Location: MD Posts: 1,100 Thanks: 5,395 Thanked 1,296 Times in 622 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	The bottom mount for the fender is at the pinch weld. I bet if you crawl under your car, you'll see it's smashed up pretty good. Just my guess. Might be cheap but looking at the bow in the fender, probably not. __________________ [Insert clever signature here] IG \| WhiskyBlog \| Photography

01-17-2023, 06:12 PM	#6
Spuds The Dictater Join Date: Apr 2017 Drives: '13 Red Scion FRS Location: MD, USA Posts: 9,580 Thanks: 26,589 Thanked 12,639 Times in 6,257 Posts Mentioned: 88 Post(s) Tagged: 0 Thread(s)	Don't bend or stress the fender itself too much. The paint might crack. You might want to loosen the top bolts while you are messing with the fender. Yes, this has happened to me. __________________ If a picture is worth a thousand words, a model is worth ten thousand pictures. Also: "Build Thread"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Out of alignment after going over a curb:(	SamtheKorean	Issues \| Warranty \| Recalls / TSB	5	03-24-2019 04:43 PM
Went over curb	Sedated	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	6	10-24-2017 01:37 PM
Curb hit	FRSure	Scion FR-S / Toyota 86 GT86 General Forum	16	03-31-2015 10:16 AM
Hit a curb :(	aakash	New England	0	10-14-2013 10:04 PM
Hit a curb	Itssrayyxd	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	3	02-08-2013 10:09 PM

01-17-2023, 09:52 AM	#5
carson.frs Member Join Date: Nov 2022 Drives: 2014 FRS Location: Utah Posts: 16 Thanks: 0 Thanked 16 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Ok yeah I saw that bracket yesterday so I’ll definitely mess with that and pinch weld. Definitely gonna do it myself cause I’m not paying a shop $500 to do a relatively easy job. Thanks for the feedback everyone!

User Name		Remember Me?
Password