17' Eight Six - HDPE - AC -Touge - Light Duty Track - Daily Driveable Year Round

[RuyGuy2]

Here's the Mod List So far.

Engine and Performance
HKS Supercharger ATI Superdamper 10% under driven and 95mm Pulley on Supercharger
95mm Pulley 3.74" + ATI Circumference 11.75 * 9.888 Gear Ratio = 100,126 RPM@7500
(This is 5000 RPM more than Stock but 5000 Less than High Boost pulley from HKS)
K&N Drop In Air Filter - Greddy Air Scoop - Crawford Billet Power Blocks
Delicious Flex Fuel Kit and Tune - Injectors and Pump - Skunk2 Stepped Equal Length Header
Mid and Over Pipe (can't remember brand) Ark exhaust Modified to be single Exit

Suspension Brakes and Handling
St Suspensions X Coilovers - Wilwood Front brake Rotor Replacement - Sport Edition P4 Rims 16x7 +35 - 225/50R16 General AS-05
P2M Lower Front Control Arms Tie Rods End Links and Rear Tie Rods - Whiteline Adjustable Rear Control Arms - Whiteline Sway Bars
DC Tower Brace - Full Tom's chassis Bracing including sway bar braces

Aero Outside
Sard Style Spoiler - DIY Plywood Splitter - Cut Rear Bumper.


Diftech Adapters, Wilwood Calipers on Stock Rotors braided steel lines. https://www.ft86club.com/forums/showthread.php?t=139903
- modified to fit nicely

[SuperTom]

Interested in the ABS delete. Mainly how you will bypass the Computer. And have you considered the Chasebays brake booster delete

[RuyGuy2]

Originally Posted by SuperTom

Interested in the ABS delete. Mainly how you will bypass the Computer. And have you considered the Chasebays brake booster delete

I'm going to leave the computer hooked up and let the manifold sit above the abs unit put some internal plugs in to keep it clean. The idea is to make this easily reversible. I do intend on getting a chase bays booster delete Unit.

[phm14]

What are your alignment specs?

[RuyGuy2]

Originally Posted by phm14

What are your alignment specs?

Alignment is something I really should learn more about, I feel like this car would benefit from more castor?

I didn't want to be to aggressive, I don't want to wear out my tires too fast.

Front
2* camber
5* caster
0* toe

Rear
1.7* camber
0* toe

[overd0sed]

Cool build. How long did it take to install the AutoBlip? Whats your review on it? Thanks

[RuyGuy2]

Originally Posted by overd0sed

Cool build. How long did it take to install the AutoBlip? Whats your review on it? Thanks

Haven't installed the autoblip yet that is a future upgrade.