Toyota TechStream Ver GTS_10.10.018 - Diagnostic Tools for FR-S/GT86/BRZ

[Uplink]

Originally Posted by Nitti

What can you do with techstream that you can't do with the android Torque app? Is this the same software used by toyota dealers today? Can you monitor injectors, maf, fuel pumps, give commands to the ECU, open close vacuum valves etc?

It's not a scanner program. It's more for adjusting options on the car. For instance, I used mine to turn off the seatbelt buzzer, turn off the light auto-off delay, turn off the alarm chirp when armed, and set the keyfob so unlock 1 time opens both doors. I believe you can also sync up new TPMS' as well as a host of other options.

[FRSBRZGT86FAN]

Originally Posted by Uplink

It's not a scanner program. It's more for adjusting options on the car. For instance, I used mine to turn off the seatbelt buzzer, turn off the light auto-off delay, turn off the alarm chirp when armed, and set the keyfob so unlock 1 time opens both doors. I believe you can also sync up new TPMS' as well as a host of other options.

Originally Posted by Nitti

What can you do with techstream that you can't do with the android Torque app? Is this the same software used by toyota dealers today? Can you monitor injectors, maf, fuel pumps, give commands to the ECU, open close vacuum valves etc?

Carista on android for $20 does the same stuff....

[camry619]

Toyota TIS techstream V10.30.029 is tested working fine with Xhorse MINI VCI cable, Xhorse MVCI and Mangose cable for Toyota. Anyone need just download from http://www.chinaautodiag.com/html/mi...nload-223.html.

I have one Xhorse MINI VCI USB cable from http://www.uobdii.com/wholesale/mini...able-2442.html and used it for 4-5 times, it working fine for almost 1 year, and yesterday download techstream V10.30.029 to update.

techstream V10.30.029 installation is a little different from the former version, it need not to active since the supplier contains a txt document with the key to register.
I install techstream V10.30.029 with only sever steps:
1) Install TOYOTA TIS Techstream V10.30.029
2) Install MCVI driver
3) Copy "Mainmenu" application, right click the gray icon "Techstream", click "Properties" - "Find Target", then paste the "Mainmenu" application to replace the existing file.

4) Connect the device to the vehicle and then install driver!

5) Open the icon "Techstream" on the desktop, please note you shoule select area "Europe"

6) When you click "Connect to Vehicle", it pops up a window about "Register Techstream Software) and it asks for a new key, click "Cancle". Go to open the folder "Toyota techstream 10.30.029", open text document "Serie" and copy the key number in it, and paste it into the blank key after "New key" and click ok, register successfully.

7) Diagnose Toyota vehicles.

Done!
Hope it helps!

[BabaYaga]

Does anyone in Sacramento North CA area or Bay Aria have TechStream? I just need to silence the passenger seat belt buzzer. Can anyone help? Let me know, please!


Sent from my iPhone using Tapatalk

[marksas]

Originally Posted by camry619

Toyota TIS techstream V10.30.029 is tested working fine with Xhorse MINI VCI cable, Xhorse MVCI and Mangose cable for Toyota. Anyone need just download from http://www.chinaautodiag.com/html/mi...nload-223.html.

I have one Xhorse MINI VCI USB cable from http://www.uobd2.net/wholesale/mini-...able-2442.html and used it for 4-5 times, it working fine for almost 1 year, and yesterday download techstream V10.30.029 to update.

techstream V10.30.029 installation is a little different from the former version, it need not to active since the supplier contains a txt document with the key to register.
I install techstream V10.30.029 with only sever steps:
1) Install TOYOTA TIS Techstream V10.30.029
2) Install MCVI driver
3) Copy "Mainmenu" application, right click the gray icon "Techstream", click "Properties" - "Find Target", then paste the "Mainmenu" application to replace the existing file.

4) Connect the device to the vehicle and then install driver!

5) Open the icon "Techstream" on the desktop, please note you shoule select area "Europe"

6) When you click "Connect to Vehicle", it pops up a window about "Register Techstream Software) and it asks for a new key, click "Cancle". Go to open the folder "Toyota techstream 10.30.029", open text document "Serie" and copy the key number in it, and paste it into the blank key after "New key" and click ok, register successfully.

7) Diagnose Toyota vehicles.

Done!
Hope it helps!

have a question for you,i have a 2013 camry ,has the remote and key in one unit. do i have to program the key and the remote separately? are there 2 separate programs that you will use? in the techstream proggy. not sure ,any help will b appreciated.

[HyperTech]

is this normal? when i try to download something from the link

http://www.chinaautodiag.com/html/mi...nload-223.html

it automaticaly block it and say its dangerous, from chrome, firefox and edge (explorer)

[stevesnj]

I have TS 10.0.18, can I simply update to the latest version or do I have to just install over again?

[babybreath]

here is my TIS installation steps

i used MINI VCI OEM cable from http://www.obdtool.co.uk/wholesale/2...gle-cable.html

installed on windows XP

Step 1- install Toyota Teachstream
Open “Toyota Techstream 10.30.029.exe”
Select a steup language to go on
Click Next
Accept the agreement to go on
Customer information: click Next
Click Install to begin installation of Techstream 10.30.029
Finish installing Techstream


Step 2- install MVCI driver for TIS
Open “MVCI Driver for Toyota”
Click Next
Click Install to begin installation of the MVCI driver for TIS
Finish installing MVCI driver for TIS

Step 3- paste and replace Main Menu
Copy “MainMenu” application
Open Techstream Properties
Click Find Target
Paste “MainMenu” application in C:/program files/toyota diagnostics/techstream/bin, confirm file replace
Close bin folder and Techstream Properties

Connect the mini vci cable to the vehicle and then install the driver
Open “Techstream” on Desktop
Click No
Select Setup->Techstream configuration
Select an area (here: Europe), click Next
Select a language (here: English), click Next
Techstream configuration, click OK
open Desktop folder “Toyota Techstream”->notepad “serie”
Copy the key
Click Connect to vehicle in Techstream interface
Paste as the New Key when register Techstream software, click OK
Finish Option (here: VIOS, China & 1205-), click Next
Select Engine and ETC to continue
Trouble codes display
Select Data list on the left menu
(Lost communication with vehicle: click Retry)
Click Close->Main Menu->Log out (Techstream)

[BabaYaga]

Originally Posted by BabaYaga

Does anyone in Sacramento North CA area or Bay Aria have TechStream? I just need to silence the passenger seat belt buzzer. Can anyone help? Let me know, please!
Sent from my iPhone using Tapatalk

I end up buying the cable from aliexpress - installed the app on my comp - did couple of twiks in the the process and successfully updated all Customizable settings in both my toyotas: Camry Hybrid and FR-S.
Made the sound of locking car more loud (with 3 pushed on remote lock button car makes 2 loud buzzes and one horn beep).
Changed to open trunk with 2 quick clicks on remote.
Silenced the front occupant seat alarm (decided not to silence driver side).
DRL decided not to turn off - but turned it off on Camry.
On Camry change the settings of open/close doors - now with long push on open button - window is rolling down.
Also, when driver door get unlock via remote access - all doors got unlocked.

Anyway, I like it and if anyone needs help in Sacramento area - shoot me PM, we might meet and I can customize your GT-86.

[Toy1]

Thank you everyone for a very informative thread.
I have the cable with the 2.0.4 firmware, I got it to connect once but on the second time I started getting a Can't connect to vim error, the firmware update tool still sees the cable, I have tried on different computers, firmwareupdate connects to it and the TIS software let's select xhorse but I get the vim error.

[Liliflower]

Originally Posted by Toy1

Thank you everyone for a very informative thread.
I have the cable with the 2.0.4 firmware, I got it to connect once but on the second time I started getting a Can't connect to vim error, the firmware update tool still sees the cable, I have tried on different computers, firmwareupdate connects to it and the TIS software let's select xhorse but I get the vim error.

VIM error is because the mvci software (toyota,honda...) will both communicate with MVCI hardware, and interrupt Techstream working.

Solution 1:
Restart laptop.
open Techsream, click “Setup”, then “Techstream configuration”.
Select “Area Selection”, get a country list and then select “Europe”.
Select “Default Language Selection” and choose “English”.
Click “Ok” in the next window.

Solution 2:
Install MVCI software and drive on a desktop with Windows XP system.
Run Techstream separately.

so that's why most people use mini vci cable with toyota software only.
http://www.obdii365.com/wholesale/mi...-shipping.html

FIY, latest techstream goes to V10.30.029

[FX86]

i set the region to north america and it detected my car and let me customize the settings...but in europe it gave me some weird codes which i didn't have a clue about

[Chasen]

This is all about Toyota Techstream TIS v11.00.017, including free download link, new information (models, features, corrections).
http://blog.uobdii.com/toyota-techst...-where-to-get/

[camry619]

Today, I received notice that Techstream lite v11.20.019 tested no problem working with xhorse clone mini vci cable, and they attached a download link, I tested it with success, I would like to share with all of you guy here. Anyone who want it browse this page: http://blog.uobdii.com/toyota-tis-te...chstream-lite/
It plublics where to download lite v11.20.019.

Good luck.