obdii port wont work

[xjohnx]

Originally Posted by Dezoris

Yes. Also crimp tool and some zip ties and the new connector wont fit in the clip properly.

got a part # or link to the crimp tool? i'm assuming it's a specialized one?

[whitefrs]

Originally Posted by Dezoris

Digikey
Here are the part numbers:

WM6653-ND QTY 2
WM3343-ND QTY 2
QTY 20 WM3324CT-ND (ONLY 7 PINS REQUIRED)


You will also need the crimp tool.

In terms of DIY take a picture of factory connector and pins, start cutting one by one and crimp one wire at a time and insert into new connect. When done insert wire holder clip and test.

2 items are not in stock fuckkkk i was goona overnight them

[xjohnx]

Originally Posted by whitefrs

2 items are not in stock fuckkkk i was goona overnight them

you might be able to find what you need here: http://www.bmotorsports.com/shop/ind.../cPath/109_151

[whitefrs]

Originally Posted by xjohnx

you might be able to find what you need here: http://www.bmotorsports.com/shop/ind.../cPath/109_151

did u order from here?

[whitefrs]

Originally Posted by xjohnx

you might be able to find what you need here: http://www.bmotorsports.com/shop/ind.../cPath/109_151

@Dezoris

do you know what i need from here to get my obd2 port to work?

[whitefrs]

does anyone know if this is all i need http://www.bmotorsports.com/shop/pro...oducts_id/1927

[xjohnx]

I'm not positive, but i think this is what you need. it's the same as the other one you linked to, but includes the female terminals

http://www.bmotorsports.com/shop/pro...oducts_id/1380

[Sportsguy83]

Originally Posted by whitefrs

does anyone know if this is all i need http://www.bmotorsports.com/shop/pro...oducts_id/1927

Have you tried asking the dealer how much the connector costs? Have you tried getting it under warranty?

Maybe the connector itself is not that expensive and it is a plug and play replacement?

Also, non-motor related stuff still has warranty and I have gotten work done from my dealer for non power train related stuff.

[whitefrs]

Originally Posted by Sportsguy83

Have you tried asking the dealer how much the connector costs? Have you tried getting it under warranty?

Maybe the connector itself is not that expensive and it is a plug and play replacement?

Also, non-motor related stuff still has warranty and I have gotten work done from my dealer for non power train related stuff.

They dont sell just the port, they sell the whole harness which is almost 1000 bucks.
I can get it under warranty cuz my car wont start as the flash stopped midway and brick the ecu

[whitefrs]

Originally Posted by xjohnx

I'm not positive, but i think this is what you need. it's the same as the other one you linked to, but includes the female terminals

http://www.bmotorsports.com/shop/pro...oducts_id/1380

This is the one i purchase
http://www.bmotorsports.com/shop/pro...k9j6vmohvi2c43

[Sportsguy83]

Originally Posted by whitefrs

I can get it under warranty cuz my car wont start as the flash stopped midway and brick the ecu

Damn... thats effed up!

You can also try junkers and cars being parted out. I know there is one here in Miami for example.

[whitefrs]

Originally Posted by Sportsguy83

Damn... thats effed up!

You can also try junkers and cars being parted out. I know there is one here in Miami for example.

Try that and no totaled or parting out going on around here

[xjohnx]

Originally Posted by whitefrs

I can get it under warranty cuz my car wont start as the flash stopped midway and brick the ecu

this happened to me. i just had to slightly bend the pins on the ECUtek cable so that they made better contact with the pins on the car side. been working right ever since. just finished flashing the Moto-East tune for my Innovate SC about 5 minutes ago. Now Pure Automotive is working on installing the SC itself. I wanted to get the flash out of the way just incase I ran into any issues with the flash, i didn't want it to be after they had installed everything.

[whitefrs]

Originally Posted by xjohnx

this happened to me. i just had to slightly bend the pins on the ECUtek cable so that they made better contact with the pins on the car side. been working right ever since. just finished flashing the Moto-East tune for my Innovate SC about 5 minutes ago. Now Pure Automotive is working on installing the SC itself. I wanted to get the flash out of the way just incase I ran into any issues with the flash, i didn't want it to be after they had installed everything.

We tried every possible way with it and it still stops halfway.
We know for sure is not the map as he load this same map to another turbo frs