WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1373 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

N_Raged · 07-13-2021, 02:47 AM

Installed Perrin 22mm front sway bar. People say this is a simple 1hr job but they failed to mention all the underbody panels. Removing the skid plate, the transmission aero cover, the two underbody aero covers behind that, and the draw stiffeners made the job a lot bigger than on early MY cars that had nothing underneath.

StraightOuttaCanadaEh · 07-13-2021, 08:21 AM

Quote:

Originally Posted by N_Raged

Installed Perrin 22mm front sway bar. People say this is a simple 1hr job but they failed to mention all the underbody panels. Removing the skid plate, the transmission aero cover, the two underbody aero covers behind that, and the draw stiffeners made the job a lot bigger than on early MY cars that had nothing underneath.

What made you want to install one of these?

N_Raged · 07-13-2021, 03:41 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

What made you want to install one of these?

Autocross
https://www.ft86club.com/forums/show...postcount=4090

2020BRZtS · 07-14-2021, 03:41 PM

Changed oil, tire rotation and some STI parts

HeresMyMind · 07-15-2021, 05:30 PM

I purchased Brembos for a 2008 STi remanufactured. Front / rear. Pads. Hardware and powdercoating. Front / rear totaled 1200$.

Fronts installed. Rears go on next week.

-B

Kiske · 07-15-2021, 05:54 PM

Quote:

Originally Posted by 2020BRZtS

Changed oil, tire rotation and some STI parts

You nailed it! Sti axelback or a catback next?

2020BRZtS · 07-15-2021, 06:02 PM

Quote:

Originally Posted by Kiske

You nailed it! Sti axelback or a catback next?

Thank you. I am so proud of myself on both the deal and the install. And you totally get me... All OEM all the way even if it's from Japan. I would love to consider both (most likely STi Axleback) but budget is tight at the moment. Had to replace wife's car after the deer hit and Lexus aren't cheap.

BrahmaBull1990 · 07-15-2021, 11:11 PM

Installed my Forester XT oil cooler(regulator) and my PCV catch can. My car now has the supporting mods I needed after being boosted with Edelbrock for a month. I feel much better now and learned a lot. I want to that you all for the help with doing this stuff. It feels so good to work on your car and I’ve never been good at it.

CrowsFeast · 07-16-2021, 08:17 AM

Quote:

Originally Posted by HeresMyMind

I purchased Brembos for a 2008 STi remanufactured. Front / rear. Pads. Hardware and powdercoating. Front / rear totaled 1200$.

Fronts installed. Rears go on next week.

-B

How involved is the job? Do you just need the calipers or do you have to pick up brackets, rotors, etc? I've seen the swap mentioned a couple of times but no detailed info.

Dzmitry · 07-20-2021, 07:42 AM

Think I might have broken the record last night. Friend bought some tires from Tire Rack as I offered picking them up, since a location is nearby my work.

(2) 275/40R20 and (2) 315/35R20

Had to disassemble the kid's car seat a little and then manipulated the tires around for the next 15 minutes until I got them all in! I regret not getting a picture of that hard work. The width of the tires was not as big of an issue as their diameter. I could only place 1 of the 315's in the trunk, and the rest had to go in the back with the seat down and up against the passenger seat folded forward.

But hey.. it worked!

NoHaveMSG · 07-20-2021, 12:40 PM

Quote:

Originally Posted by Dzmitry

\

(2) 275/40R20 and (2) 315/35R20

WTF are those for?

HeresMyMind · 07-20-2021, 01:16 PM

Quote:

Originally Posted by CrowsFeast

How involved is the job? Do you just need the calipers or do you have to pick up brackets, rotors, etc? I've seen the swap mentioned a couple of times but no detailed info.

Calipers
Pads
Rotors
Brake mounting bolts
Brake pad hardware

Dzmitry · 07-20-2021, 03:29 PM

Quote:

Originally Posted by NoHaveMSG

WTF are those for?

He's got a '13 BMW X6 with a performance package that upsizes his wheels to the equivalent of the X6 M.

evidence · 07-21-2021, 04:00 PM

installed new shift knob off amazon

07-15-2021, 05:30 PM	#19213
HeresMyMind Senior Member Join Date: Oct 2017 Drives: 2013 WRB BRZ Limited Location: CT Posts: 348 Thanks: 33 Thanked 165 Times in 94 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I purchased Brembos for a 2008 STi remanufactured. Front / rear. Pads. Hardware and powdercoating. Front / rear totaled 1200$. Fronts installed. Rears go on next week. -B Attached Images

07-15-2021, 11:11 PM	#19216
BrahmaBull1990 Howdy Join Date: Feb 2021 Drives: 2020 BRZ PP Location: Snohomish, WA Posts: 589 Thanks: 1,271 Thanked 446 Times in 248 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Installed my Forester XT oil cooler(regulator) and my PCV catch can. My car now has the supporting mods I needed after being boosted with Edelbrock for a month. I feel much better now and learned a lot. I want to that you all for the help with doing this stuff. It feels so good to work on your car and I’ve never been good at it. __________________ There's a point at 7,000 RPM... where everything fades. The machine becomes weightless. Just disappears. And all that's left is a body moving through space and time. 7,000 RPM. That's where you meet it. You feel it coming. It creeps up on you, close in your ear. Asks you a question. The only question that matters. Who are you? Last edited by BrahmaBull1990; 07-16-2021 at 11:52 AM.

07-21-2021, 04:00 PM	#19222
evidence Junior Member Join Date: Jul 2021 Drives: red 2013 frs Location: nc Posts: 4 Thanks: 0 Thanked 3 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	installed new shift knob off amazon Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) -- General Topics	8	03-31-2012 08:53 AM

07-13-2021, 02:47 AM	#19209
N_Raged Senior Member Join Date: May 2019 Drives: 2019 BRZ Sport-Tech RS Location: Toronto, Canada Posts: 228 Thanks: 49 Thanked 201 Times in 106 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Installed Perrin 22mm front sway bar. People say this is a simple 1hr job but they failed to mention all the underbody panels. Removing the skid plate, the transmission aero cover, the two underbody aero covers behind that, and the draw stiffeners made the job a lot bigger than on early MY cars that had nothing underneath.

User Name		Remember Me?
Password