Look for the ZA1JA03N complete RomRaider Editor Definition definition file.

[nerve86]

Look for the ZA1JA03N complete RomRaider Editor Definition definition file.

I found ZA1JA03N my RomRaider Editor Definition is incomplete. Searched the forum and there is no, only ZA1JA01g.
thanks.

[steve99]

see here


https://www.ft86club.com/forums/show....php?p=3060187

[nerve86]

Originally Posted by steve99

see here


https://www.ft86club.com/forums/show....php?p=3060187

Can I modify the calid in the xml of A01G to be 03N?

[nerve86]

Originally Posted by steve99

see here


https://www.ft86club.com/forums/show....php?p=3060187

I want to edit the stock 03n and then use it for ecutek, not the 03n of oft based on 01g, can I directly modify calid=03n to use it?

[nerve86]

@steve99， I modified the xml calid=03n of A01G, opened the rom, and the table data displayed in it was wrong.

[steve99]

Are you using romraider and oft roms or ecutek ?


oft A03N will be based on a substitute rom and that will confuse ecutek



if ecutek use ecuteks editor if you want to edit genuine A03N roms

[steve99]

Originally Posted by nerve86

@steve99， I modified the xml calid=03n of A01G, opened the rom, and the table data displayed in it was wrong.

post up tje rom your trying to edit here ill jave a look

[nerve86]

Originally Posted by steve99

Are you using romraider and oft roms or ecutek ?


oft A03N will be based on a substitute rom and that will confuse ecutek



if ecutek use ecuteks editor if you want to edit genuine A03N roms

ecutek is missing some table definitions, such as overrun, I use romraider to edit the missing table in the stock ROM, and then use ecutek to edit it.

[nerve86]

Originally Posted by nerve86

ecutek is missing some table definitions, such as overrun, I use romraider to edit the missing table in the stock ROM, and then use ecutek to edit it.

But I can't find the complete definition file of the romraider for the stock rom of A03N.

[nerve86]

Originally Posted by nerve86

But I can't find the complete definition file of the romraider for the stock rom of A03N.

this is the file i use，
genuine A03N roms，and RR_ZA1JA03N.xml，Incomplete definition, like my first post.
03n.zip

[nerve86]

Originally Posted by steve99

post up tje rom your trying to edit here ill jave a look

After modifying RR_ZA1JA01G.xml, an error is displayed.

[steve99]

Originally Posted by nerve86

After modifying RR_ZA1JA01G.xml, an error is displayed.
Attachment 212375
Attachment 212373
Attachment 212374

OK my trick with definitions only works with OFT roms as their A03N tunes are actually based on A01G roms




you could just use A01G in your car as a substitute for the A03N rom.


There are no romraider definitions for genuine A03N roms


however easier to just use ecutek if you have it



Ecutek has all the tables you need in the A03N they are just called different names


The idle overun tables you want are called


"Ignition Timing Idle" there is about 6 tables defined more than romraider in A01G they are under Ignition timing folder in ecutek they are fully defined so just edit your A03N rom in ecutek

[nerve86]

Originally Posted by steve99

OK my trick with definitions only works with OFT roms as their A03N tunes are actually based on A01G roms




you could just use A01G in your car as a substitute for the A03N rom.


There are no romraider definitions for genuine A03N roms


however easier to just use ecutek if you have it



Ecutek has all the tables you need in the A03N they are just called different names


The idle overun tables you want are called


"Ignition Timing Idle" there is about 6 tables defined more than romraider in A01G they are under Ignition timing folder in ecutek they are fully defined so just edit your A03N rom in ecutek

Thank you for your reply!
ecutek prevents me from flashing the A01G.
If I flash the A01G with ecuflash, I will lose the ecutek license.
Is there a way to transplant the rr definition of A01G to 03N?

[steve99]

sent you private message