|
DIY (Do-It-Yourself) Guides For all DIYs. |
|
Thread Tools | Search this Thread |
01-27-2019, 11:52 AM | #1 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
2018+ Navigation in a 2017
Finally got the 2018 navigation radio working in my 2017 Yellow. Although I hear there are a lot of complaints of this navigation receiver it is 100% better than the 2017 radio. If you were to go buy all the parts new you would be looking around $2,800. Plus you are not able to buy the connectors. Subaru sells the entire harness not just the connector and pins. As the 2018+ with navigation become older and more of them are totaled this option could become an inexpensive way to upgrade. Few people look to buy a stock radio so junk yards usually sell them inexpensive.
This should work for 2016, 2017 and 2018+ premium models. Benefits of this route. Retains stock look. This is important to me. I like to modify my car but try to keep it from looking that way. Inexpensive, If you can find a totaled one close to you. Easy modification. Cons of this route. Will not be as functional as an aftermarket option. First thing to do is to find a donor car that they will let you cut the wire harness. Items you will need listed below. Navigation receiver. Plastic trim that goes around the radio. USB jacks and wire harness that it is attached to. Aux unit assembly. This is a small black box attached to the bottom of radio. GPS antenna. This is mounted just above the radio to the left. Steering wheel controls. You will want all the plugs that plug into the receiver. I would cut them with as much wire as possible. You will also want to look at the microphone assembly and the possibility of changing this out. I was unable to do that however the receiver will work with the older one without modifications. MIC wire diagram Steering wheel wire diagram The next step is to remove those items from your car. Items to install without modification. Steering wheel controls. USB plugs and wire harness. GPS antenna. Modifications to the wire harness. Aux unit assembly will need power and ground. Power will go to pin 5. I pulled this from pin 3 from the 28 pin connector. Ground will go to pin 1. I just made a short lead and grounded to the radio chassis. Aux unit wire diagram Rear view camera will need to be moved from the 28 pin connector to the 5 pin connector. Pin 12 will go to pin 3. Pin 11 will go to pin 2. Pin 20 will go to pin 1. Pin 13 will go to pin 4. Rear camera wire diagram Amplifier remote on. You will need to move Pin 9 from the 28 pin connector to pin 8 of the 10 pin connector. AMP remote on wire diagram On the new receiver it shows an Ignition circuit going to pin 1 of the 28 pin connector. I have tried this connected and unconnected and not sure what this changes. On the new receiver there is a ground supplied when the door is opened. This is on pin 4 of the smaller 12 pin connector. This is for retained accessory. I have not hooked this up the radio will run for around 2 min after you shut off the car. Not positive I will ever install this. The microphone assembly on the 2018+ appears to be better quality. It has 2 microphones built in. I did not have a close donor car and was unable to see if changing this out was an option. However the 2017 microphone works with no changes. I would show you pictures of the modified wire harness only I purchased the radio from a junkyard in Houston. Once I got the radio I was unable to talk them into getting my any other components so I ended up buying parts new and had to hack the wires into the new connectors. I will keep an eye out here in Dallas for one and see if they will let me come and get the connectors then I will be able to modify it so it looks a lot better. (Yes I worry about how something looks that no one else will ever see) If someone gets to a new one and sees anything else let me know. I will update this. Connector list Last edited by Grady; 01-30-2019 at 09:02 PM. Reason: Adding Links |
The Following 3 Users Say Thank You to Grady For This Useful Post: |
01-27-2019, 11:52 AM | #2 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Last edited by Grady; 01-27-2019 at 12:43 PM. |
The Following User Says Thank You to Grady For This Useful Post: | Busybee (08-20-2019) |
09-16-2019, 05:17 PM | #3 |
Junior Member
Join Date: Sep 2017
Drives: 2014 Subaru BRZ
Location: NC
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Grady,
This is some amazing work! I'm wondering if the 2018 unit would fit and operate in a GPS equipt 2014 model.. any thoughts? |
09-17-2019, 10:41 AM | #4 |
Senior Member
Join Date: May 2019
Drives: AP2 S2000, 91 Miata 1.8L Rotrex 5MT
Location: Detroit, MI
Posts: 465
Thanks: 275
Thanked 299 Times in 187 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Just wondering, would there be interest if I created and sold a plug and play patch harness for this radio upgrade? I have already pulled the wiring diagrams from Subaru and Toyota and have found the connector supplier.
Would anyone have any interest in that?
__________________
2022 Hyundai Elantra N 6MT SCCA TT S3//Will be back in an 86 eventually
|
09-17-2019, 10:55 AM | #5 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
|
09-17-2019, 10:57 AM | #6 | |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Quote:
|
|
01-13-2020, 02:36 PM | #7 |
Junior Member
Join Date: Sep 2018
Drives: '17 BRZ PP Crystal Black Silica
Location: Atlanta
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
do you have an idea of how a 86 TRD edition's steering wheel controls will be wiring-wise (would it be 17' or 18' wiring)? Those are pretty readily available.
__________________
IG:@dude_inthemoon
|
01-20-2020, 10:57 PM | #8 |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Working on this same project myself now.
Your post and attached wiring notes helped me learn how to better read automotive wiring diagrams.. I was pretty clueless before. Anyhow, I managed to validate what I have against your work and wanted to share photos of the 2018 pigtails, annotated with the wire functions. I need to grab a depinning tool so I can move the 7 relevant wires.. Any recommendations on a tool? |
01-24-2020, 09:31 AM | #9 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Thanks for the post. Mine has been working fine but now that I see your pigtails it makes me want to start searching again for a totaled one I can cut the harness out of.
|
01-24-2020, 10:30 PM | #10 | |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I haven't been able to depin the backup camera connector on the pigtail, so I'll probably end up cutting and splicing into the harness in the car anyway. How did you power up the black box and do the backup cam without those connectors? |
|
01-26-2020, 06:40 PM | #11 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
|
The Following User Says Thank You to Grady For This Useful Post: | Ricco (01-26-2020) |
01-28-2020, 08:01 PM | #12 |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
So I finally did my wiring tonight.. The good news is that the Amp now turns on and Carplay works great!
The bad news is that my backup camera still doesn't work. When I throw it into Reverse, absolutely nothing happens.. It's like as if the reverse light isn't even detected. I would expect to maybe get a blank screen or something if it was the camera was just wired wrong. I've checked and double checked the wiring and I'm confident I wired the camera correctly and the reverse wire is on Pin 2 of the 28 pin connector. My car is auto, but from what I can tell, that shouldn't make a difference. My next step is to check I'm getting 12v on Pin 2 when I put it in reverse but I dont have a multimeter with me so I'm stuck for the time being.. Any thoughts? |
01-28-2020, 09:45 PM | #13 | |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,698
Thanks: 352
Thanked 1,484 Times in 778 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Quote:
I would check the fuse if you have not already. The backup connector/pin does not change between the radios. |
|
01-28-2020, 10:38 PM | #14 | |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I matched up, black to black, red to red, white to white, shield to yellow.. but i'm now wondering if I should have switched the black and white wires. 2018 CA+ 6v GND CA- Black White Red Shield 2016 (as far as I can tell) CA+ V+ CGND V- White Black Red Shield Checking fuses is always a good idea but I can't see how there could be a blown fuse since the Camera is powered directly from the head unit. I'll check them anyway, but what are your thoughts on these pinouts? |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 radio in 2017? | COBlue | Electronics | Audio | NAV | Infotainment | 53 | 01-22-2022 12:38 PM |
FS: 2017-2018 Toyota 86 Front lip | GYNXxx | Canada Classifieds | 5 | 08-30-2019 06:25 PM |
Help deciding on a 2017 or 2018 BRZ | wild03 | BRZ First-Gen (2012+) -- General Topics | 41 | 09-20-2018 09:29 PM |
2018 BRZ Suspension in pre 2017 brz? | HeresMyMind | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 9 | 03-06-2018 09:39 PM |
2017 Subaru BRZ Navigation? | Crave | Electronics | Audio | NAV | Infotainment | 14 | 08-17-2016 06:40 PM |