Stock height + Aftermarket wheels compilation!!!! - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Fainten · 07-11-2017, 05:30 AM

Quote:

Originally Posted by BAD ROD

I’m sticking with stock height for now. Living in the mountains, I’ve about tore the front bumper off a few times.

My setup: Work Wheels T7R 18x9.5 +38, 245/35/18

The TRD fender extensions drop about ½ inch closing the wheel gap.

I have 18X9.5 +35 wheels, are your wheels rubbing on your stock suspension? or rubbing/scrapping at all.I want to run the same tire size as well but i want to know if i can run that width on stock suspension

joeyf1986 · 07-16-2017, 08:27 PM

RPF1 17x9 +35 wrapped up in 245/45

Waffle86 · 07-30-2017, 12:35 AM

Setup:

Avid1 AV20 18x9.5 +38

Continental DWS 06 235/40/18

Name: driver side_small.jpg
Views: 5282
Size: 376.0 KB

Name: Poke-tires_small.jpg
Views: 5746
Size: 514.2 KB

3.5 finger wheel gap, only have about 2mm clearance to the spring perch - no rubbing as of yet. Was hoping to get some eibach sportline springs soon but at this point I'm almost certain I'll rub just due to natural camber from the drop. Likely I'll have coils coming soon to give me peace of mind...

Waffle86 · 07-30-2017, 12:45 AM

Quote:

Originally Posted by Fainten

I have 18X9.5 +35 wheels, are your wheels rubbing on your stock suspension? or rubbing/scrapping at all.I want to run the same tire size as well but i want to know if i can run that width on stock suspension

Every car is a little different so it's a bit of a gamble...

I'm running 18x9.5 +38 235/40 and I BARELY clear the spring perch, maybe 1-2mm (less than a finger). I did a lot of research before committing to my setup and anticipated more like 5mm based off other's build on here (hence the gamble). In short, I went 235/40 as I knew it'd be a tight fit.

+35 will give you an extra 3mm to work with, so in theory you should be fine running 245/35, but again it's hard to know for sure until you test fit. Buy the wheels you want, test fit, and then order tires once you know what you have to work with.

Cordelia · 07-30-2017, 09:24 PM

Quote:

Originally Posted by Waffle86

Setup:

Avid1 AV20 18x9.5 +38

Continental DWS 06 235/40/18

Attachment 156463

Attachment 156464

3.5 finger wheel gap, only have about 2mm clearance to the spring perch - no rubbing as of yet. Was hoping to get some eibach sportline springs soon but at this point I'm almost certain I'll rub just due to natural camber from the drop. Likely I'll have coils coming soon to give me peace of mind...

Super sweet.. would love the machined version of those wheels on my steel 86

rookietopro_frs · 07-31-2017, 04:24 AM

Quote:

Originally Posted by joeyf1986

RPF1 17x9 +35 wrapped up in 245/45

I'm trying to pick something other than RPF1s but they look so good + excellent weight.

FRS13_ · 09-01-2017, 10:11 PM

2013 FRS

17x9 +38 square set up.

245/40-17

Stock suspension.

Have had over a year, no rubbing at all.

Sent from my SAMSUNG-SM-G930A using Tapatalk

BAD ROD · 09-04-2017, 01:09 PM

Quote:

Originally Posted by Fainten

I have 18X9.5 +35 wheels, are your wheels rubbing on your stock suspension? or rubbing/scrapping at all.I want to run the same tire size as well but i want to know if i can run that width on stock suspension

No rubbing whatsoever.

dejahboi · 09-11-2017, 01:08 AM

here's couple pictures of 57CR 18x9.5 +38 when I was on stock suspension

Sent from my SAMSUNG-SM-G935A using Tapatalk

BAD ROD · 09-12-2017, 11:25 PM

What size tires?

Quote:

Originally Posted by dejahboi

here's couple pictures of 57CR 18x9.5 +38 when I was on stock suspension

Sent from my SAMSUNG-SM-G935A using Tapatalk

86Ryan · 09-16-2017, 01:48 PM

Stock height with some WRX wheels

Sent from my iPhone using Tapatalk

rookietopro_frs · 09-20-2017, 05:37 AM

Quote:

Originally Posted by BAD ROD

What size tires?

I want to know too, cause that looks clean !

dejahboi · 09-20-2017, 12:47 PM

Quote:

Originally Posted by rookietopro_frs

I want to know too, cause that looks clean !

245/35R18

Lakitu · 09-22-2017, 01:53 AM

Oh man! This is exactly the look I'm going for. What specs for the tires? Those are TS6's? I have my cart at tirerack with T6S 18x8.5 +45, HTR Z III 255/35ZR18 for about $1300. But I don't really know what I'm doing. (am noob). Need a little guidance!

Quote:

Originally Posted by eddieEndo

07-16-2017, 08:27 PM	#212
joeyf1986 Member Join Date: Jul 2017 Drives: 2017 BRZ Location: Bay Area Posts: 67 Thanks: 1 Thanked 14 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	RPF1 17x9 +35 wrapped up in 245/45 Attached Images

07-30-2017, 12:35 AM	#213
Waffle86 Member Join Date: Jun 2017 Drives: 2013 SWP BRZ Limited Location: Vancouver, WA Posts: 114 Thanks: 21 Thanked 68 Times in 42 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Setup: Avid1 AV20 18x9.5 +38 Continental DWS 06 235/40/18 3.5 finger wheel gap, only have about 2mm clearance to the spring perch - no rubbing as of yet. Was hoping to get some eibach sportline springs soon but at this point I'm almost certain I'll rub just due to natural camber from the drop. Likely I'll have coils coming soon to give me peace of mind... __________________ Last edited by Waffle86; 07-30-2017 at 12:46 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket lug nuts on stock wheels: confirm?	empower-auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	27	09-19-2018 07:38 PM
Aftermarket wheels with stock suspension	Thongpocket	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	8	01-24-2013 05:08 PM
Stock TPMS's with aftermarket valves/wheels?	Phaedrus29	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	08-17-2012 01:18 PM
Need help with Stock height measurement	D1cker	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	10	08-03-2012 03:30 AM
Aftermarket wheels on stock BRZ/86s	yajin	BRZ Photos, Videos, Wallpapers, Gallery Forum	2	05-01-2012 02:52 AM

09-01-2017, 10:11 PM	#217
FRS13_ Senior Member Join Date: Oct 2016 Drives: 2013 Scion FRS 6-speed Location: Rockwall, TX Posts: 157 Thanks: 97 Thanked 74 Times in 48 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	2013 FRS 17x9 +38 square set up. 245/40-17 Stock suspension. Have had over a year, no rubbing at all. Sent from my SAMSUNG-SM-G930A using Tapatalk

09-11-2017, 01:08 AM	#219
dejahboi Senior Member Join Date: Oct 2016 Drives: 13 FRS - Boosted Location: Sacramento Posts: 107 Thanks: 15 Thanked 41 Times in 27 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	here's couple pictures of 57CR 18x9.5 +38 when I was on stock suspension Sent from my SAMSUNG-SM-G935A using Tapatalk

User Name		Remember Me?
Password