Spyder Headlights! - Finally arrived. :) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FT-86 SpeedFactory · 01-17-2014, 12:48 PM

We got these in late Wednesday and have been doing our best to try and get videos and install done on them. Yo got the photos done up this morning so those are below like always.

They are available in Chrome, or Black housing and you can either get them with the "Angel Eye" or with out. Pick your flavor.

A couple things about these, they are heavier then the Winjets. Probably due to the extra components and maybe some better quality on the inside. Hard to say with out tearing one apart.

The bottom row of LED's you see is the parking / blinker section and will require you to tap into the side markers somewhere to get that signal. If you get the halo version you will need to tap a source for those as well. Lets you choose when and how you want those light up which is cool. Everything else is ready to go, so you got a really short wiring job to get those to light up is all.

Photos of them installed along with a video will be up after the weekend. For now here they are out of the box, and you can look at the wiring on the back.

Any questions post them up. We can make sure we cover them in the install video.

Halo Version:

Non Halo Version:

Install Video

[ame="https://www.youtube.com/watch?v=F_H9rlOFm8g&feature=c4-overview&list=UUhDYhVRjSigVidaiCXsgzNQ"]Spyder LED Headlight Install - Scion FRS and Subaru BRZ - YouTube[/ame]

cdo221 · 01-17-2014, 03:27 PM

Are these H7 bulbs just like the Winjets? If you could show when the DRL light bar is on in the video, that would be great (i.e. are they just like the Winjets in that they turn off when low beams are on, but are on any other time (DRL/parking lights/high beams).

Also would be nice if you could point out any easy to tap wires for the halos depending on what when you want them on, that would be awesome too!

sklimo · 01-17-2014, 03:43 PM

Damn if they were plug and play I would buy them NOW

FT-86 SpeedFactory · 01-17-2014, 04:06 PM

Quote:

Originally Posted by sklimo

Damn if they were plug and play I would buy them NOW

They technically are from that all the "stock" functions work, DRL, Low Beam and High Beam. It's adding the turn signals into the head light and a halo, so you have to find power for those depending on how you want them to work.

connor_lol · 01-17-2014, 04:31 PM

For high beams, do you have to have a dual filament bulb in the projectors? Or how does the high beams work?

wrohdejr · 01-17-2014, 04:33 PM

Money sent and order placed!!!!

kthxbai · 01-17-2014, 04:37 PM

Anyone know where these Sounder Headlights are manufactured?

Edit: Spyder headlights manufactured?
s3 Tapatalk

Curt Aigner · 01-17-2014, 04:41 PM

How do you get high/low beams out of a H11 bulb thats only 2 wires ?

The low beam would be the projector H11 , and I assume you would use the Halo for the DRL , but loose the high beam function .

Do you offer a dual filliment [ 3 wire H4 ] in a H11 type for high/low in HID ?

CamryDS · 01-17-2014, 04:44 PM

Quote:

Originally Posted by Curt Aigner

How do you get high/low beams out of a H11 bulb thats only 2 wires ?

It's probably like the winjets where there's a mechanical flap that opens and the drls shine as well.

vincent201089 · 01-17-2014, 05:38 PM

Any info on the BRZ style headlight?

wrohdejr · 01-17-2014, 05:41 PM

Quote:

Originally Posted by vincent201089

Any info on the BRZ style headlight?

From ft86speedfactory.com website:

Spyder LED Headlights for the Scion FR-S and Subaru BRZ has arrived. These units come with an H11 bulb installed and ready to go.

This version has the Halo LED ring around the projector.

These are a direct bolt in for the Scion FR-S and Subaru BRZ. If you want the HID effect for your non-HID FRS you may order a diode dynamics HID kit through us which will fit in the housing. Stock BRZ HID bulbs will fit as well.

vincent201089 · 01-17-2014, 05:47 PM

Quote:

Originally Posted by wrohdejr

From ft86speedfactory.com website:

Spyder LED Headlights for the Scion FR-S and Subaru BRZ has arrived. These units come with an H11 bulb installed and ready to go.

This version has the Halo LED ring around the projector.

These are a direct bolt in for the Scion FR-S and Subaru BRZ. If you want the HID effect for your non-HID FRS you may order a diode dynamics HID kit through us which will fit in the housing. Stock BRZ HID bulbs will fit as well.

I mean the boomerang style led at the last Sema.

SmsAlSuwaidi · 01-17-2014, 07:51 PM

I might get these just to get rid of the turn signals!

cdo221 · 01-17-2014, 07:57 PM

Quote:

Originally Posted by vincent201089

I mean the boomerang style led at the last Sema.

Quote:

Originally Posted by wrohdejr

From ft86speedfactory.com website:

Spyder LED Headlights for the Scion FR-S and Subaru BRZ has arrived. These units come with an H11 bulb installed and ready to go.

This version has the Halo LED ring around the projector.

These are a direct bolt in for the Scion FR-S and Subaru BRZ. If you want the HID effect for your non-HID FRS you may order a diode dynamics HID kit through us which will fit in the housing. Stock BRZ HID bulbs will fit as well.

I think vincent is talking about the Spec D Tuning headlights:

Last I heard is Feb 2014.. who knows. Thread on it is here:
http://www.ft86club.com/forums/showthread.php?p=1322299

01-17-2014, 12:48 PM	#1
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Spyder Headlights! - Finally arrived. :) We got these in late Wednesday and have been doing our best to try and get videos and install done on them. Yo got the photos done up this morning so those are below like always. They are available in Chrome, or Black housing and you can either get them with the "Angel Eye" or with out. Pick your flavor. A couple things about these, they are heavier then the Winjets. Probably due to the extra components and maybe some better quality on the inside. Hard to say with out tearing one apart. The bottom row of LED's you see is the parking / blinker section and will require you to tap into the side markers somewhere to get that signal. If you get the halo version you will need to tap a source for those as well. Lets you choose when and how you want those light up which is cool. Everything else is ready to go, so you got a really short wiring job to get those to light up is all. Photos of them installed along with a video will be up after the weekend. For now here they are out of the box, and you can look at the wiring on the back. Any questions post them up. We can make sure we cover them in the install video. Halo Version: Non Halo Version: Install Video [ame="https://www.youtube.com/watch?v=F_H9rlOFm8g&feature=c4-overview&list=UUhDYhVRjSigVidaiCXsgzNQ"]Spyder LED Headlight Install - Scion FRS and Subaru BRZ - YouTube[/ame] Last edited by FT-86 SpeedFactory; 01-22-2014 at 09:26 AM.

01-17-2014, 04:31 PM	#5
connor_lol Senior Member Join Date: Jul 2012 Drives: GT86 / Rebadged Firestorm FRS Location: Wayne, IL Posts: 280 Thanks: 122 Thanked 172 Times in 87 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	For high beams, do you have to have a dual filament bulb in the projectors? Or how does the high beams work? __________________ Member Car Journal: http://www.ft86club.com/forums/showthread.php?t=14084 Turbo Build Thread: http://www.ft86club.com/forums/showthread.php?t=72204

01-17-2014, 04:41 PM	#8
Curt Aigner Master Parts Manager Join Date: Jul 2012 Drives: 13' FRS Firestorm Location: Dupage Co. Ill. Posts: 35 Thanks: 0 Thanked 33 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How do you get high/low beams out of a H11 bulb thats only 2 wires ? The low beam would be the projector H11 , and I assume you would use the Halo for the DRL , but loose the high beam function . Do you offer a dual filliment [ 3 wire H4 ] in a H11 type for high/low in HID ? Last edited by Curt Aigner; 01-17-2014 at 04:53 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Details Finally - Spyder LED Headlights - FT-86 SpeedFactory SEMA Coverage	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	33	11-08-2013 08:16 PM
JDL UEL Headers finally arrived!	stockysnail	Northwest	11	10-18-2013 12:07 AM
Finally, my BRZ has arrived (WRB)	wrb	BRZ Photos, Videos, Wallpapers, Gallery Forum	24	07-24-2013 03:02 AM
She Has Finally Arrived	truenosan	CANADA	26	12-07-2012 06:23 PM

01-17-2014, 03:27 PM	#2
cdo221 Senior Member Join Date: Nov 2012 Drives: 2013 Ultramarine FR-S, 2015 RS 1.0 Location: SF Bay Area Posts: 532 Thanks: 285 Thanked 174 Times in 110 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Are these H7 bulbs just like the Winjets? If you could show when the DRL light bar is on in the video, that would be great (i.e. are they just like the Winjets in that they turn off when low beams are on, but are on any other time (DRL/parking lights/high beams). Also would be nice if you could point out any easy to tap wires for the halos depending on what when you want them on, that would be awesome too!

01-17-2014, 05:38 PM	#10
vincent201089 Senior Member Join Date: Jan 2013 Drives: frs Location: garden grove Posts: 241 Thanks: 249 Thanked 81 Times in 45 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Any info on the BRZ style headlight?

01-17-2014, 07:51 PM	#13
SmsAlSuwaidi Boosted Join Date: Feb 2013 Drives: Not a supra....yet Location: Riverside,CA/ Abu Dhabi,UAE Posts: 2,925 Thanks: 487 Thanked 1,203 Times in 812 Posts Mentioned: 90 Post(s) Tagged: 2 Thread(s)	I might get these just to get rid of the turn signals!

User Name		Remember Me?
Password