Exhausts

[PotatoPeeler]

Originally Posted by riri86

I come in at 50kg so my car is extra light.

Somebody get this chap a sandwich!!

[Sudden]

Originally Posted by Sudden

I've had a Powerflow exhaust made up and fitted in P. E. cost me R4500, sounds nice and has improved the response and feels like its got a bit more power but on the freeway driving at 120km/hr (3000 rpm) and I put my foot down the exhaust noise worries my ears, not the loudness but I think rather the frequency. Has any body else had similar problems? I see a lot of guys have fitted the BRZ exhaust, what does it sound like?

From the front flange, a resonance absorbing unit followed by a 30cm freeflow box then a Y-piece fitted near the diff all on 63mm stainless tubing, from the Y-piece to 2X 30cms silencers on 57mm stainless tubing then 89mm tailpieces. Have uploaded a photo which is in my garage. Thanks.

[Sudden]

Sounds nice, a lot different than mine, mine growls, very low frequency. Thanks, think I should have bought one instead.

[Sudden]

Originally Posted by ShaunWRX

Give us a bit more info on the exhaust setup and we can help.
How many silencers? position of them? Diameter of pipe etc...

Hi, seem too be losing my replies, will try again. From the front flange, resonance absorbing unit, then 30cm freeflow box to a Y-piece fitted near the diff all connected with 63mm stainless tubing. From the Y-piece 2 X 30cms rear silencers fitted with 89cms tail pipes all on 57mm tubing. Photos are in my garage. Thanks.

[Sudden]

Originally Posted by sav

No droning at all on the highway.

Hi thanks, sounds good, perhaps should have bought one to.

[Rifle]

1320Performance UEL, PLM overpipe, HKS dual resonated front pipe, Invidia N1 catback. Pre-supercharger.
[ame="https://www.youtube.com/watch?v=igqyXeXkJr4"]Full Catless FR-S / 1320 UEL / Invidia N1 - YouTube[/ame]

Innovate/Sprintrex Twin Screw Supercharger same setup as above
[ame="https://www.youtube.com/watch?v=8KRHLM4kktw"]2015 Scion FR-S Innovate/Sprintrex Twin Screw Supercharger - YouTube[/ame]

Unfortunately, don't have a video with my Tomei EL header before it was totaled. I'll get one uploaded as soon as I put the charger on my Hyper.Blue, which will probably be a couple months.


Incase you were wondering, 256/211 HP/TQ on 93.

Originally Posted by riri86

Same here. Honestly wouldn't mind getting a smashed 86, throwing out the interior and doing a decent engine swop.

SR20DET possibly with a good aftermarket ECU, Link or Vi-Pec.

Pure RaceCar

I got one you can buy from my insurance company...

[Fish Eagle]

The other car in this clip is Martin's RMS Innovate/Sprintex supercharged 86.
I don't know what exhaust he's got, but it's very loud and sounds good.

You can also see the difference between my Vortech SC and his Innovate/Sprintex SC - he's got a little bit more torque.
I'm using the lowest boost Vortech pulley which boosts 0.44 bar.

[ame="https://www.youtube.com/watch?v=OwgESihhnYE"]2015-11-01 ZW002 0559 0636 Martin Exhaust - YouTube[/ame]

[Fish Eagle]

As a comparison, here's what @FT_86_SM_GP's car sounds like.

[ame="https://www.youtube.com/watch?v=1j18ks-RTTw"]2015-11-01 ZW003 0852 0903 Shiren Exhaust - YouTube[/ame]

[FT_86_SM_GP]

Originally Posted by riri86

I love the look of the whole stripped out interior with on race seat. I already have the Sparco wheel and NRG quick release so I have that sporty inside look

I come in at 50kg so my car is extra light.

With the rand and dollar my hopes and dreams for a Tomei system is out the door

BTW I think we share the same name! was checking your YouTube Videos lol

Dude thats epic!

That Sparco wheel and quick release must feel like driving a race car everyday! I had thoughts about that, but too much of a chicken to compromise on removing an airbag,

Agree with @PotatoPeeler ! lol, give this man a yellow Potato sandwich!

With regards to importing exhausts with our ZAR/$ exchange , you would be better of going local, TMSS does some quality custom work, I'm sure they will work out cheaper than importing (after adding shipping) and could replicate the Tomei systems,

Honor to share the same name with fellow petrolheads!


All the best with your 86 build!

[FT_86_SM_GP]

Originally Posted by Fish Eagle

The other car in this clip is Martin's RMS Innovate/Sprintex supercharged 86.
I don't know what exhaust he's got, but it's very loud and sounds good.

You can also see the difference between my Vortech SC and his Innovate/Sprintex SC - he's got a little bit more torque.
I'm using the lowest boost Vortech pulley which boosts 0.44 bar.

Love the sound of those RMS headers, it SCREAMS at a different pitch to the Borla UEL header(which has more of a grumble)...

Always a pleasant site seeing and hearing that Red RMS 86 spit fire past the pit straight!

[Sudden]

The setup

[Fish Eagle]

Originally Posted by Sudden

The setup

That's neat!!

[Ds3ire]

For anyone interested, Subaru Centurion just got another shipment of BRZ exhausts.
I think the cost is around R5400 or so.

[Fish Eagle]

Here's what my car's exhaust sounds like...

That's when @JouMaSeHoes is driving my car.
When I drive it doesn't sound like that

[ame="https://www.youtube.com/watch?v=nRo8zVdz0Ww"]My Exhaust - YouTube[/ame]