Tristate Area F/S F/T thread - Page 65 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KxngCorey · 10-15-2021, 09:48 PM

Quote:

Originally Posted by Ernest72

4 used bfg comp2 a/s tires with about 30k on them. Still have plenty of tread. 215/45R17 Only taking them off because I want the Michelin’s PS A/S to match my summers PS4. $50 obo. If no takers they go to recycler next week.

Location? Pics?

Sent from my SM-G988U using Tapatalk

waterpanda · 10-17-2021, 03:40 AM

Looking to buy:
- Fujitsubo double resonated front pipe
- Tomei 60R
- Recaro Profi (single or double)
I'm in North Jersey- PM me if you have the goods!

Ernest72 · 10-17-2021, 06:48 PM

Quote:

Originally Posted by KxngCorey

Location? Pics?

Sent from my SM-G988U using Tapatalk

Sold thanks.

Ernest72 · 10-17-2021, 06:48 PM

Still have Perrin intake for $30.

Also just found brand new TRD brakes for stock brakes. Front and rear. $90 obo.

femaledog · 10-23-2021, 12:48 PM

Reduced the price of my gunmetal 17x8 RPF1s to $550 for the set of four. Come pick em up in Brooklyn, NY 11209.

https://www.ft86club.com/forums/showthread.php?t=147037

Radster · 10-26-2021, 04:31 PM

I have the following for sale.
All items are to be picked up in Northern N.J or I'm willing to meet you within 30min of my location (River Edge, NJ).

Revel USA Medallion Touring-S (previously known as Tanabe Concept-G) cat-back exhaust. It is a single-exit(drivers side), 60mm pipe diameter, 100mm Tip Diameter. It is lightweight at only 22lbs.

Retails for $750.00 (nationwide backorder)
Had on car for 2k miles. No dings or dents.

Asking $475

A couple photos of what it looked like on my car.

I also have an Injen SP1230P Intake
Retails for $350, also on nationwide backorder.
I'll take $100

Joon525 · 10-26-2021, 08:39 PM

These are GONE.

So you know this thread?

Back when that thread started I looked on ebay for the parts and got them delivered to me from overseas but when they arrived they were a third party.
Now, they may be the same as the Subaru parts for all I know, I can try to compare them to the genuine ones on my car right now but honestly? It doesn't matter to me that much.

So I have 2 of these and they are free. 100% free.
But you come to me. I am not lifting a finger to come meet you (I won't even meet you halfway unless I'm already going to be in an area that is a halfway point between you and me.

Right now they are in Old Tappan.
I am also in Edgewater, Hoboken, and on most Saturdays I'm at AZP Installs in Kenilworth.

Radster · 10-26-2021, 08:43 PM

Quote:

Originally Posted by Joon525

So you know this thread?

Back when that thread started I looked on ebay for the parts and got them delivered to me from overseas but when they arrived they were a third party.
Now, they may be the same as the Subaru parts for all I know, I can try to compare them to the genuine ones on my car right now but honestly? It doesn't matter to me that much.

So I have 2 of these and they are free. 100% free.
But you come to me. I am not lifting a finger to come meet you (I won't even meet you halfway unless I'm already going to be in an area that is a halfway point between you and me.

Right now they are in Old Tappan.
I am also in Edgewater, Hoboken, and on most Saturdays I'm at AZP Installs in Kenilworth.

I'll take them. I'm local to Old Tappan.

ThatYeti · 10-27-2021, 07:07 AM

Quote:

Originally Posted by Radster

I have the following for sale.
All items are to be picked up in Northern N.J or I'm willing to meet you within 30min of my location (River Edge, NJ).

Revel USA Medallion Touring-S (previously known as Tanabe Concept-G) cat-back exhaust. It is a single-exit(drivers side), 60mm pipe diameter, 100mm Tip Diameter. It is lightweight at only 22lbs.

Retails for $750.00 (nationwide backorder)
Had on car for 2k miles. No dings or dents.

Asking $475

A couple photos of what it looked like on my car.

I also have an Injen SP1230P Intake
Retails for $350, also on nationwide backorder.
I'll take $100

Were you able to run that intake without a custom tune?

Radster · 10-27-2021, 07:28 AM

Quote:

Originally Posted by ThatYeti

Were you able to run that intake without a custom tune?

I had a tune with custom MAF scaling.

NFS86 · 11-17-2021, 01:21 PM

Looking to buy Scion FR-S or brz 13-16 oem fender garnishes in tri-state area. Color doesn’t matter. Send me a message here or on Instagram @dxxd.86 Thanks!

Dzmitry · 11-22-2021, 09:20 AM

Selling stock OP and full stock cat-back exhaust for cheap from 2018 BRZ (under 15K miles on parts). If interested, PM with offer.

B-R-Z · 11-24-2021, 09:03 PM

Looking to make some room in my garage. Located in Monmouth county NJ.

Stock axle-back (1yr, 12k miles) - $50
Stock springs (1yr, 12k miles) - $25
Sound tube (2yrs, 24k miles) - Free

I also have a set of factory wheels with TPMS and the stock header that I am considering hanging onto until I get my 2nd car, but I'll take offers.

Radster · 12-30-2021, 05:32 PM

Quote:

Originally Posted by Radster

I have the following for sale.
All items are to be picked up in Northern N.J or I'm willing to meet you within 30min of my location (River Edge, NJ).

Revel USA Medallion Touring-S (previously known as Tanabe Concept-G) cat-back exhaust. It is a single-exit(drivers side), 60mm pipe diameter, 100mm Tip Diameter. It is lightweight at only 22lbs.

Retails for $750.00 (nationwide backorder)
Had on car for 2k miles. No dings or dents.

Asking $425

A couple photos of what it looked like on my car.

BUMP. Cat-back still available. Lowered Price, $400

10-17-2021, 06:48 PM	#900
Ernest72 Senior Member Join Date: Jul 2016 Drives: 16 Silver BRZ, 04 Silver WRX wagon Location: Rockland county, NY Posts: 1,410 Thanks: 181 Thanked 768 Times in 439 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Still have Perrin intake for $30. Also just found brand new TRD brakes for stock brakes. Front and rear. $90 obo. Last edited by Ernest72; 10-19-2021 at 10:08 AM.

10-26-2021, 04:31 PM	#902
Radster Member Join Date: Oct 2017 Drives: 2014 FR-S Location: New Jersey Posts: 60 Thanks: 12 Thanked 9 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FS: (NJ) Exhaust & Intake I have the following for sale. All items are to be picked up in Northern N.J or I'm willing to meet you within 30min of my location (River Edge, NJ). Revel USA Medallion Touring-S (previously known as Tanabe Concept-G) cat-back exhaust. It is a single-exit(drivers side), 60mm pipe diameter, 100mm Tip Diameter. It is lightweight at only 22lbs. Retails for $750.00 (nationwide backorder) Had on car for 2k miles. No dings or dents. Asking $475 A couple photos of what it looked like on my car. I also have an Injen SP1230P Intake Retails for $350, also on nationwide backorder. I'll take $100 __________________ Rad Tatis \| NNJR #89 STX www.tatisrealtor.com

10-26-2021, 08:39 PM	#903
Joon525 Senior Member Join Date: Jun 2016 Drives: 2016 BRZ Location: NJ Posts: 362 Thanks: 53 Thanked 160 Times in 105 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	These are GONE. So you know this thread? Back when that thread started I looked on ebay for the parts and got them delivered to me from overseas but when they arrived they were a third party. Now, they may be the same as the Subaru parts for all I know, I can try to compare them to the genuine ones on my car right now but honestly? It doesn't matter to me that much. So I have 2 of these and they are free. 100% free. But you come to me. I am not lifting a finger to come meet you (I won't even meet you halfway unless I'm already going to be in an area that is a halfway point between you and me. Right now they are in Old Tappan. I am also in Edgewater, Hoboken, and on most Saturdays I'm at AZP Installs in Kenilworth. Attached Images Last edited by Joon525; 10-27-2021 at 08:14 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FR-S/BRZ Bay Area Meet Thread	Coconuts	Southern California	619	08-10-2015 12:46 PM
Bay Area Pricing Thread	donoman	Northern California	26	03-09-2015 04:24 AM
TRISTATE FT86 CLUB TSHIRT DESIGN THREAD	subyboy	NY / NJ / CT / PA	3	09-21-2013 08:33 AM
Bay Area Meet Thread !	TheFRSChick	Southern California	32	01-05-2013 11:06 PM
Suggestions for Photoshoot area in the tristate	Ny Brz	NY / NJ / CT / PA	6	10-22-2012 06:32 PM

10-17-2021, 03:40 AM	#898
waterpanda Member Join Date: Jun 2021 Drives: 2013 BRZ Location: NJ Posts: 21 Thanks: 8 Thanked 11 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looking to buy: - Fujitsubo double resonated front pipe - Tomei 60R - Recaro Profi (single or double) I'm in North Jersey- PM me if you have the goods!

10-23-2021, 12:48 PM	#901
femaledog Member Join Date: Sep 2017 Drives: 2017 BRZ Perf. Pkg. Location: NYC Posts: 67 Thanks: 92 Thanked 32 Times in 25 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Reduced the price of my gunmetal 17x8 RPF1s to $550 for the set of four. Come pick em up in Brooklyn, NY 11209. https://www.ft86club.com/forums/showthread.php?t=147037

11-17-2021, 01:21 PM	#907
NFS86 Member Join Date: May 2019 Drives: 2016 Scion FR-S Location: Northern NJ Posts: 23 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looking to buy Scion FR-S or brz 13-16 oem fender garnishes in tri-state area. Color doesn’t matter. Send me a message here or on Instagram @dxxd.86 Thanks!

User Name		Remember Me?
Password