Antenna Delete no Weld Version with Carbon Plaque

[stevesnj]

So I hate the look of the antenna on the roof, just think it ruins the fine shape of this car... anyway I used a Carbon Fiber Console Plaque. It was meant for that purpose but I changed a design. So I bought the center plaque from http://www.innovateddynamics.com/pro...-holder-plaque

For $15 it is a steal. It's hand made to order. So I decided to give it a try using it to use as a cover for the hole well it worked. I plan to paint it when the weather outside allows as I do not have a garage. So it can be very easy or slightly difficult. Easy version, remove old antenna, clean area the size of the plaque use 3M DS tape and add silicone sealant around the rectangular hole for peace of mind and done!

For even more peace of mind I epoxied a 3/4" long 1/4-20 thread cut off a bolt. This takes more time and I secure it with a flat washer and wing nut. Overkill but I'd rather make sure it doesn't fly off. But tape should be fine.

I will upload more detailed pics later but here's the result before I paint it this spring. I have the simple install instructions in my build thread page 12

[Cole]

Haha. You think the antenna ruins the lines of the car so you stick a rectangular piece of metal on there that doesn't sit flush? Logic.

[DIM]

Sorry that looks terrible IMO.

[stevesnj]

Originally Posted by DIM

Sorry that looks terrible IMO.

If welding and painting was $15 I'd do that. Lol. This is not the best way but the best I could figure out that is cost effective.

[stevesnj]

Originally Posted by Cole

Haha. You think the antenna ruins the lines of the car so you stick a rectangular piece of metal on there that doesn't sit flush? Logic.

You're so good looking!!

[stevesnj]

Originally Posted by new2subaru

My guess is you wouldn't be a big fan of these

Nah I'll pass. :]

[JoeC]

If the objective was to remove the antennae and cover the hole, it looks like a success. But aesthetically speaking, the solution does not look good.

[stevesnj]

Originally Posted by JoeC

If the objective was to remove the antennae and cover the hole, it looks like a success. But aesthetically speaking, the solution does not look good.

Actually I don't use the radio so this is a win win. I don't like the sharkfin antenna and I needed to cover the hole. I looked for some type of plug but couldn't find anything. I would wanted something smaller but there is nothing out there and welding and repaint is the best alternative which i don't have the $$ to spend on a hole. It accomplished my goal but to me it looks 100% better than the sharkfin.

[D_Thissen]

OP as long as you're happy, that's all that matters. Unfortunately this is a public forum so when you post something like this, you will get opinions from others. Some of those opinions may disagree with yours. Its your car, as long as you like it

[stevesnj]

Originally Posted by D_Thissen

OP as long as you're happy, that's all that matters. Unfortunately this is a public forum so when you post something like this, you will get opinions from others. Some of those opinions may disagree with yours. Its your car, as long as you like it

Thank's, yeh I don't take offence, I let them speak their minds it doesn't bother me. Thanks!

[go_a_way1]

Originally Posted by stevesnj

Thank's, yeh I don't take offence, I let them speak their minds it doesn't bother me. Thanks!

Ok I will bite.

Or you could just vinyl wrap the whole roof?? Personally I dont like the whole wrap thing but at least it wont be such an eye sore. Wrap can be had cheap and you can install yourself.

[stevesnj]

Originally Posted by go_a_way1

Ok I will bite.

Or you could just vinyl wrap the whole roof?? Personally I dont like the whole wrap thing but at least it wont be such an eye sore. Wrap can be had cheap and you can install yourself.

I thought about wrap also but being a 1x1 1/2" hole it seems expensive to do that for a hole. This is much less of an eyesore than that hunk of plastic jutting out of th roof..lol Thanks man

[go_a_way1]

Originally Posted by stevesnj

I thought about wrap also but being a 1x1 1/2" hole it seems expensive to do that for a hole. This is much less of an eyesore than that hunk of plastic jutting out of th roof..lol Thanks man

You can buy enough to do the whole roof for $25 off ebay I bet haha. Yeah each to his own, to be totally honest I hate the stock antenna as well, and dislike my sharkfin but I live with it for now. Oneday I might have to hole filled and roof painted.

[8R6]

Originally Posted by go_a_way1

Ok I will bite.

Or you could just vinyl wrap the whole roof?? Personally I dont like the whole wrap thing but at least it wont be such an eye sore. Wrap can be had cheap and you can install yourself.

if you do only vinyl and wrap the roof, the hole area will still be visible as that part will "sink" in compared to the rest of the roof. plus the vinyl will be so thin that if anything scratches it or even if theres enough air pressure, it'll puncture and make a hole.