OEM Tail light connectors - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

aschnell · 02-17-2014, 10:19 PM

Looking to wire the fog light as 4th brake light. Wanted to do a plug and play solution. I think I found the connector and a source. Not 100% positive these are the right ones but pretty sure they are. Ordered some and will update post later to confirm either way.
Sumitomo TS 090
A guy in Japan sells these. Bought some other connector from him for my Honda before. www.Easternbeaver.com

Sportster · 02-17-2014, 10:30 PM

I'd be interested if they turn out to be the correct connectors.

Sent from my SGH-I337 using Tapatalk

sirsol66 · 02-17-2014, 10:31 PM

Interesting, having to cut into the OEM harness is the main reason I haven't installed rear fogs yet. Let us know your results.

aschnell · 02-27-2014, 07:44 PM

So i got the connectors today and they are the correct ones. Took 10 days from placing the order from Japan to east coast USA with standard cheap shipping. Not bad.

These are the two parts you need to make up a cable.

4 Position TS 090 Male Connector
Item# 4P-TS090-M

4 Position TS 090 Female Connector
Item# 4P-TS090-F

I checked the wiring diagram for the pinout. Wire colors ( i tested these with a multimeter)

Light Green - STOP
Black - GND
Yellow/Green - Turn
Red - Tail

Going to crimp/solder up a cable to run my 4th brake light tomorrow. Dont expect any surprises.

sirsol66 · 02-27-2014, 08:30 PM

Sorry but could you link to the actual connector? I clicked around on the site but couldn't find the two PN's you have listed. Thanks

NemeGuero · 02-27-2014, 08:45 PM

Would love to know where you got them and pricing.

aschnell · 02-27-2014, 10:58 PM

http://www.easternbeaver.com/Main/El...onnectors.html

On this page. TS series 4 position connector.
$4.19 ea for male/female with crimp pins. You will probably need some sort of universal crimp tool. I have one at work so I didn't need one.

NemeGuero · 04-08-2014, 12:47 AM

Finally got my connectors! took about a week and a half. Gonna get started on my Y harness tomorrow!

Plumbus · 06-27-2020, 07:27 PM

Quote:

Originally Posted by aschnell

http://www.easternbeaver.com/Main/El...onnectors.html

On this page. TS series 4 position connector.
$4.19 ea for male/female with crimp pins. You will probably need some sort of universal crimp tool. I have one at work so I didn't need one.

Fantastic find OP, I was looking for these connectors as I didn't want to wire the iJDMToy 3rd brake light permanently to the car wiring. Until I find the time to research and route a long cable for fog light functionality from the front fogs, this will do nicely.

That said, either you posted the wrong link or the website got updated and ruined the link, but that link takes you to HM and MT type connectors. The correct link to TS series connectors is this:

https://www.easternbeaver.com/Main/E...090/ts090.html

Chuckls · 07-02-2020, 02:46 PM

I have a friend that makes PnP harnesses for 4th brake lights. They're like $12 shipped.

pistolgrippoet · 07-07-2020, 11:39 AM

Quote:

Originally Posted by Chuckls

I have a friend that makes PnP harnesses for 4th brake lights. They're like $12 shipped.

I'd be interested in one. Care to link?

Chuckls · 07-07-2020, 10:14 PM

Quote:

Originally Posted by pistolgrippoet

I'd be interested in one. Care to link?

https://www.facebook.com/groups/FRSB...31256113672267

dkdnt232 · 11-02-2021, 03:02 PM

i use this for whoever needs one in the future:

https://www.ebay.com/itm/303483893103

02-17-2014, 10:19 PM	#1
aschnell Member Join Date: Jan 2014 Drives: BRZ Location: NH Posts: 90 Thanks: 0 Thanked 27 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	OEM Tail light connectors Looking to wire the fog light as 4th brake light. Wanted to do a plug and play solution. I think I found the connector and a source. Not 100% positive these are the right ones but pretty sure they are. Ordered some and will update post later to confirm either way. Sumitomo TS 090 A guy in Japan sells these. Bought some other connector from him for my Honda before. www.Easternbeaver.com

02-27-2014, 07:44 PM	#4
aschnell Member Join Date: Jan 2014 Drives: BRZ Location: NH Posts: 90 Thanks: 0 Thanked 27 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Correct Connectors So i got the connectors today and they are the correct ones. Took 10 days from placing the order from Japan to east coast USA with standard cheap shipping. Not bad. These are the two parts you need to make up a cable. 4 Position TS 090 Male Connector Item# 4P-TS090-M 4 Position TS 090 Female Connector Item# 4P-TS090-F I checked the wiring diagram for the pinout. Wire colors ( i tested these with a multimeter) Light Green - STOP Black - GND Yellow/Green - Turn Red - Tail Going to crimp/solder up a cable to run my 4th brake light tomorrow. Dont expect any surprises.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Valenti tail light signal light issue	djdnz	Cosmetic Modification (Interior/Exterior/Lighting)	70	12-03-2017 12:49 AM
Tail light ?	mousekilla15	BRZ First-Gen (2012+) -- General Topics	2	07-30-2013 08:03 PM
Valenti Japan LED Tail Light & Rear Bumper Reverse LED Light	nigel-jdmparts	Exterior Parts - Lighting	13	04-30-2013 12:14 PM
FS - Light tinted tail light overlays	seven	Exterior Parts (Aero, Lighting, Etc.)	0	01-26-2013 10:05 PM
experiencing tail light + fog light condensation?	whyreeto	AUSTRALIA	20	01-14-2013 11:15 PM

02-17-2014, 10:30 PM	#2
Sportster Member Join Date: Sep 2013 Drives: '14 BRZ Location: Katy, TX Posts: 24 Thanks: 2 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'd be interested if they turn out to be the correct connectors. Sent from my SGH-I337 using Tapatalk

02-17-2014, 10:31 PM	#3
sirsol66 Senior Member Join Date: Apr 2013 Drives: 2013 FRS- Hot Lava Location: Michigan Posts: 674 Thanks: 16 Thanked 162 Times in 115 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Interesting, having to cut into the OEM harness is the main reason I haven't installed rear fogs yet. Let us know your results.

02-27-2014, 08:30 PM	#5
sirsol66 Senior Member Join Date: Apr 2013 Drives: 2013 FRS- Hot Lava Location: Michigan Posts: 674 Thanks: 16 Thanked 162 Times in 115 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Sorry but could you link to the actual connector? I clicked around on the site but couldn't find the two PN's you have listed. Thanks

02-27-2014, 08:45 PM	#6
NemeGuero Banned Join Date: Aug 2012 Drives: FR-S Location: Seattle, WA Posts: 459 Thanks: 42 Thanked 122 Times in 95 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Would love to know where you got them and pricing.

02-27-2014, 10:58 PM	#7
aschnell Member Join Date: Jan 2014 Drives: BRZ Location: NH Posts: 90 Thanks: 0 Thanked 27 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	http://www.easternbeaver.com/Main/El...onnectors.html On this page. TS series 4 position connector. $4.19 ea for male/female with crimp pins. You will probably need some sort of universal crimp tool. I have one at work so I didn't need one.

04-08-2014, 12:47 AM	#8
NemeGuero Banned Join Date: Aug 2012 Drives: FR-S Location: Seattle, WA Posts: 459 Thanks: 42 Thanked 122 Times in 95 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Finally got my connectors! took about a week and a half. Gonna get started on my Y harness tomorrow!

07-02-2020, 02:46 PM	#10
Chuckls Moutain Runner Join Date: Aug 2018 Drives: BRZ Location: Atlanta, GA Posts: 487 Thanks: 23 Thanked 300 Times in 166 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I have a friend that makes PnP harnesses for 4th brake lights. They're like $12 shipped.

11-02-2021, 03:02 PM	#13
dkdnt232 Member Join Date: Nov 2014 Drives: 2013 subaru brz, 1979 toyota hilux, Location: fontana, CA Posts: 25 Thanks: 9 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i use this for whoever needs one in the future: https://www.ebay.com/itm/303483893103

User Name		Remember Me?
Password