>>> 3 New Lightweight Flow Form Wheels <<< 720 FORM Compilation

[Pat]

Originally Posted by sam69

Thanks much for the pics but still trying to find what offset they are, are they +35

Yes. That is stated in the original post.

[twag4]

Originally Posted by hmong337

Did you dial-in any negative camber up front?

The place that alligned my car did not. I took camber bolts to them. When I picked up the car, the guy handed them back to me and said they weren't needed. "You have zero camber up front, perfect!" I originally told him I wanted about -1 all around, ended up with -2 in back and 0 in front. The rear I will fix with SPC control arms, the front will be fixed at the same time with the camber bolts. I already talked to the shop owner about it, and he is going to discount the next allignment since they didn't install the camber bolts. I even called and asked whether I should install them, or bring the bolts to them. The owner said to bring them the bolts, that way they get the washer turned the right way. I will get it corrected in the next couple of weeks though, so

[twag4]

Originally Posted by Scavanger

I really like those caps are they on amazon too or just ebay?

They are just stickers. The caps the wheels come with do not have the 720 form stickers on them. They include the stickers, but the caps are solid chromed plastic. Rather than install the included stickers, I bought the 86 stickers on ebay. I had to take scissors to the edge and trim a very small amount all the way around to make them fit, but it turned out OK. You can't event tell I trimmed them. I didn't find anything on amazon in a color I liked. I thought the gray 86 would look best with my car. Every color of sticker to match every color of FRS, BRZ, or 86 is available from one place or another- except silver/silver ignition.So, I went with the dark gray. Not every vendor has every color, but every color is available somewhere.

[Scavanger]

Yeah i have a 10 series too and i want it to match haha

[TheVoiceOfReason]

720 Form GTF3 18x8 +42 with 225/40/18 Michelin Pilot sport A/S 3's. Has OEM TPMS swapped over. Also, I weighed them at 18.6lbs.

[Anorexic 86]

Originally Posted by TheVoiceOfReason

720 Form GTF3 18x8 +42 with 225/40/18 Michelin Pilot sport A/S 3's. Has OEM TPMS swapped over. Also, I weighed them at 18.6 lbs.

Looks good and thanks for the weight info!

Front page updated...

[Anorexic 86]

GTF3
18x8 +42 18.6 lbs.

[kpamir]

Really digging the GTF3s, good to see that they looks really nice on the actual car as well.

[Raven604]

Any one have the 17x8s?

[Scavanger]

10 series with gtf2s 235/40 front 255/35 rear

[btoast]

Originally Posted by Scavanger

10 series with gtf2s 235/40 front 255/35 rear

Springs or coil?

If springs which and wheel gap pics pls.

[Canehda]

looks like a 1-1.5" drop at rear which you could get from springs or coils!

[sachu]

Those gtf2s look great. Would have got those if they came in a 17.

Can't wait to have my GTF1s delivered next week!

[protpibe]

Does anyone have the 17x9's on a car with STI Brembos?