FS: XP10 Pads, AX6 Pads, SS Lines, BMC Brace - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

86_Freak · 02-09-2017, 12:12 AM

I sold the FR-S, so I need to get rid of my track brake setup.

***SOLD***Carbotech XP10 Brake Pads - $200 shipped - These pads were great on the track. Very good initial bite, good pedal feel, and no brake fade. I drove on them to/from the track and were soft until a couple medium stops, and they dust a lot, and they make a lot of noise, so not a good street pad. They have (2) track days on them and minimal street mileage.

***SOLD***Carbotech AX6 Brake Pads - $145 shipped - I used these pads for auto-x and daily driver use. They are a good all-around pad, if you can handle some dust and some noise driving around on the street. They had decent initial bite and warmed up quickly. They have about 8k miles and a season of auto-x on them.

***SOLD***Goodridge Stainless Steel Lines - $75 shipped - I used these for about a year until I wanted to compete in CS in SCCA, which doesn't allow SS lines. They have about 15k miles on them.

***SOLD***Supertek Brake Master Cylinder Brace - $45 shipped - I used it for about a year until I wanted to compete in CS in SCCA, which doesn't allow the brace. It has about 15k miles on it.

Im_SPEED · 02-09-2017, 05:14 PM

How much for just the front ax6

86_Freak · 02-10-2017, 11:54 AM

Quote:

Originally Posted by Im_SPEED

How much for just the front ax6

I'm not really wanting to split them, nobody is going to buy just the rear pads.

86_Freak · 02-16-2017, 06:24 AM

Everything is still available except for the master cylinder brace.

Im_SPEED · 02-16-2017, 07:35 PM

Ready to part with just the front ax6 yet? lol

86_Freak · 02-23-2017, 07:22 AM

CarboTech XP10 pads have been sold. Only the AX6 pads and SS lines are available.

86_Freak · 03-04-2017, 10:38 AM

Bump.

86_Freak · 03-28-2017, 07:46 AM

Stainless steel brake lines have been sold. Only the AX6 pads remain.

86_Freak · 04-03-2017, 06:33 AM

All items have been sold!

02-09-2017, 12:12 AM	#1
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	FS: XP10 Pads, AX6 Pads, SS Lines, BMC Brace I sold the FR-S, so I need to get rid of my track brake setup. *SOLDCarbotech XP10 Brake Pads - $200 shipped - These pads were great on the track. Very good initial bite, good pedal feel, and no brake fade. I drove on them to/from the track and were soft until a couple medium stops, and they dust a lot, and they make a lot of noise, so not a good street pad. They have (2) track days on them and minimal street mileage. SOLDCarbotech AX6 Brake Pads - $145 shipped - I used these pads for auto-x and daily driver use. They are a good all-around pad, if you can handle some dust and some noise driving around on the street. They had decent initial bite and warmed up quickly. They have about 8k miles and a season of auto-x on them. SOLDGoodridge Stainless Steel Lines - $75 shipped - I used these for about a year until I wanted to compete in CS in SCCA, which doesn't allow SS lines. They have about 15k miles on them. SOLDSupertek Brake Master Cylinder Brace - $45 shipped - I used it for about a year until I wanted to compete in CS in SCCA, which doesn't allow the brace. It has about 15k miles on it. __________________ http://www.ft86club.com/forums/showthread.php?t=100069 Last edited by 86_Freak; 04-03-2017 at 06:33 AM.*

02-16-2017, 06:24 AM	#4
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Everything is still available except for the master cylinder brace. __________________ http://www.ft86club.com/forums/showthread.php?t=100069

02-23-2017, 07:22 AM	#6
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	CarboTech XP10 pads have been sold. Only the AX6 pads and SS lines are available. __________________ http://www.ft86club.com/forums/showthread.php?t=100069

03-04-2017, 10:38 AM	#7
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Bump. __________________ http://www.ft86club.com/forums/showthread.php?t=100069

03-28-2017, 07:46 AM	#8
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Stainless steel brake lines have been sold. Only the AX6 pads remain. __________________ http://www.ft86club.com/forums/showthread.php?t=100069

02-09-2017, 05:14 PM	#2
Im_SPEED Senior Member Join Date: Aug 2012 Drives: FRS hot lava Location: Oregon Posts: 151 Thanks: 9 Thanked 32 Times in 16 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	How much for just the front ax6

02-16-2017, 07:35 PM	#5
Im_SPEED Senior Member Join Date: Aug 2012 Drives: FRS hot lava Location: Oregon Posts: 151 Thanks: 9 Thanked 32 Times in 16 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Ready to part with just the front ax6 yet? lol

04-03-2017, 06:33 AM	#9
86_Freak Senior Member Join Date: Feb 2015 Drives: 2015 FR-S Location: Olathe, KS Posts: 102 Thanks: 1 Thanked 44 Times in 25 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	All items have been sold! __________________ http://www.ft86club.com/forums/showthread.php?t=100069

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS:MA Carbotech xp10 rear pads, brand new. $115	dreamwonder	Brakes, Suspension, Chassis	2	08-14-2016 11:31 PM
FS: Front Carbotech XP10 Pads (CP8350)	Legionsk88	Brakes, Suspension, Chassis	5	06-12-2016 03:22 PM
WTB XP10 Front Pads	Legionsk88	Want-To-Buy Requests	2	05-26-2016 01:00 PM
WTB: Carbotech XP10 pads from a Canadian Supplier.	BRZZZZZZZZZZ	Canada Classifieds	6	03-03-2016 05:48 PM
FS: Carbotech XP10 brake pads	WolfpackS2k	Brakes, Suspension, Chassis	3	03-31-2014 03:24 PM

User Name		Remember Me?
Password