To those who rebadged as a toyota..

[tbwoodlee]

This is where I got my emblems, they are perfect fit.
http://ft86speedfactory.com/frs-gt86...04e1f3917cdcae

I got my GT86 badge from nigel-jdmparts which has no pins, it sticks with double sided tape, which is included.
http://www.nigel-jdmparts.com/toyota...d=gt86%20badge

I want to rebadge but the scion badge on the steering wheel makes it seem pointless.

You can rebadge that as well. I followed this DIY for the steering wheel rebadge
http://www.ft86club.com/forums/showt...=airbag+emblem
You can see my results with the DIY on the second page

I have the toyota wheel caps, and trunk liner as well. There is zero trace of scion in my vehicle now.

[lantsalot]

Originally Posted by Tt3Sheppard

I want to rebadge but the scion badge on the steering wheel makes it seem pointless.

I considered that, along with the rear bumper application and the Scion centercaps on the wheels. But to be honest, unless looking for those things, when you look at the car the toyota badges still look amazing (and much better in my opinion). But depends on your level of OCD.

[tbwoodlee]

Originally Posted by lantsalot

I considered that, along with the rear bumper application

The rear bumper is a vinyl sticker that can be peeled off.

[dun3]

Ebay, $15 shipped for both

[RT87]

Originally Posted by Tt3Sheppard

I want to rebadge but the scion badge on the steering wheel makes it seem pointless.

I'm hoping it would be possible for someone to fabricate a jdm looking outside piece, instead of having to replace the whole airbag.

[Cade01]

Just to clear things up the confusion the badges that fit are: Corolla Part# 90975-A2003 and Avalon Part# 90975-02069

They are cheaper than the JDM badges and look the same.

[Dadhawk]

Originally Posted by Cade01

Just to clear things up the confusion the badges that fit are: Corolla Part# 90975-A2003 and Avalon Part# 90975-02069

They are cheaper than the JDM badges and look the same.

I have to ask, but besides looking the same aren't the probably exactly the same? Does Toyota source the parts differently somehow?

[Cade01]

Originally Posted by Dadhawk

I have to ask, but besides looking the same aren't the probably exactly the same? Does Toyota source the parts differently somehow?

Not sure, if someone who has the JDM ones would post the part #s we could find out pretty easy. I'm going to guess for some reason Toyota uses different part #s

[Mac1235]

Originally Posted by Tt3Sheppard

I want to rebadge but the scion badge on the steering wheel makes it seem pointless.

Want to let you know the TRD steering wheel is out in Japan and it doesn't have the Scion emblem on it. It is decently expensive but will give you a OEM like wheel with no emblem. So change those badges there is hope! Or you can follow the DIY for swapping in another badge on the wheel, but I don't like ****ing around airbags for anything.

Originally Posted by Trojan_SC

Do the prongs line up correctly?

Yes. Dead on! Check out that thread linked above to get the exact part numbers for the parts department because if they look up 2012 Avalon rear badge it will show like three of them and they will need a part number to narrow it down.

[marky]

anyone know a good deal on the GT86 logo for the rear trunk?

[mashal]

Originally Posted by marky

anyone know a good deal on the GT86 logo for the rear trunk?

If you find one pm me info, I want one !

[BlaineWasHere]

Originally Posted by .Alex

Put a Lexus badge on it instead. Toyota badge = cheap appliance car.

That's exactly what type of car it is...

[jstans84]

Originally Posted by .Alex

Put a Lexus badge on it instead. Toyota badge = cheap appliance car.

ORLY?

[marky]

Originally Posted by mashal

If you find one pm me info, I want one !

yup... price sure is high for just that GT86 logo.. only see 50$ but sure is nice.. ill keep my eye out for a nice deal..not sure if ill find a better deal as of now..