Single DIN Instrument Cluster

[Aussie]

I was wanting to add instruments to my Turbo FR-S and wasn’t thrilled with the various gauge pods and mounts available. I found a company, intellitronix, that make LED gauges and were happy to sell me the electronics. I created a video of the install process. I'm not much of a videographer but it does give you an overview of the process. In the video I mentioned that I would be adding the boost sensor to the power brake side of the vacuum lines, this is incorrect. I ended up attaching it to the manifold side. Also the camera did funky things with the displays on my drive segment but if you ignore the blinking displays it does show it working.

Thanks

Parts List

Create a Dash
https://www.intellitronix.com/produc...rsal-gauge-kit
I rang them and asked for a reduced kit with just the gauges I wanted. With shipping I paid just over $200

Single DIN head Unit with installation Kit
https://www.crutchfield.com/p_130S50...S.html?tp=5684

SCOSCHE SCN4202B
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Boost sensor adapter
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Barbed Hose Fitting, Tee
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Nylon spacers
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

ProSport Oil Galley Plug
https://www.rallysportdirect.com/par...hreaded-center

Black braided expandable flex sleeve
https://www.ebay.com/itm/BLACK-BRAID...72.m2749.l2649

1/8-27 NPT Female to 1/8 28 BSPT BSP Male Gauge Sensor Sender Adapter Reducer
https://www.ebay.com/itm/1-8-27-NPT-...72.m2749.l2649

Plus wire, zip ties, vacuum hose, hose clamps, electrical tape, electrical connectors.