OEM Exhaust Mod-Cutting the Stock muffler open - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ModBargains.com · 09-20-2016, 09:02 PM

Quote:

Originally Posted by NyC Zn6

Is this an i'm just bored and i have a grinder+motorcycle helmet let me hack up my oem muffler thread ....if so subbed.

I feel like this is how the aftermarket mod industry was founded!

We support Charles and his motorcycle-helmet antics!

Mike1327 · 03-16-2020, 09:34 AM

I did this mod yesterday.

Cut the center 4" section between the separating walls weld spots, chopped out the center section pipes, and welded it back shut.

Sounds great, you really only hear the difference under acceleration. Otherwise sounds mostly stock, maybe 15% more growly.

High recommend for anyone wanting a LITTLE more than stock sound. $150 for a welder and welding helmet, and about $10 in bent sawsall blades.

I'd recommend this though:

- Cut open BOTH SIDES of the canister
- get 10" long sawsall metal blades.

That way you can not smash your fingers and hands and destroy a bunch of blades trying to cut out the center pipes.

And, added bonus, you get to learn welding a little more if this is a first time or you.

humfrz · 03-16-2020, 11:30 AM

Quote:

Originally Posted by Mike1327

I did this mod yesterday.

Cut the center 4" section between the separating walls weld spots, chopped out the center section pipes, and welded it back shut.

Sounds great, you really only hear the difference under acceleration. Otherwise sounds mostly stock, maybe 15% more growly.

High recommend for anyone wanting a LITTLE more than stock sound. $150 for a welder and welding helmet, and about $10 in bent sawsall blades.

I'd recommend this though:

- Cut open BOTH SIDES of the canister
- get 10" long sawsall metal blades.

That way you can not smash your fingers and hands and destroy a bunch of blades trying to cut out the center pipes.

And, added bonus, you get to learn welding a little more if this is a first time or you.

Got any pictures?

humfrz

Mike1327 · 03-16-2020, 01:15 PM

No, you just cut a big "U" on both sides in the center as in other pics, then a long metal blade wont smack into the muffler case and bend. its 2x the welding, but well worth it.

TRUST ME, it's a PITA to cut out the center pipes if you only open up one side of the muffler.

Quote:

Originally Posted by humfrz

Got any pictures?

humfrz

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Muffler Cut Open	EAGLE5	Engine, Exhaust, Transmission	56	03-22-2020 03:57 AM
FS: Stock exhaust muffler and mid pipe $80	AustinTCLN	NY / NJ / CT / PA	7	11-05-2017 09:23 PM
Cutting open tail lights with a Solder iron!	JollyJON	DIY (Do-It-Yourself) Guides	68	11-18-2016 05:11 PM
Cutting Stock Exhaust Into Single Exit?	HachiRo	Engine, Exhaust, Transmission	8	02-14-2015 10:24 PM
Keep stock muffler with other exhaust mods?	jordanrw260	Engine, Exhaust, Transmission	51	03-23-2013 11:38 AM

03-16-2020, 09:34 AM	#16
Mike1327 Member Join Date: Feb 2020 Drives: 2016 Subaru BRZ Limited Location: MA Posts: 19 Thanks: 0 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I did this mod yesterday. Cut the center 4" section between the separating walls weld spots, chopped out the center section pipes, and welded it back shut. Sounds great, you really only hear the difference under acceleration. Otherwise sounds mostly stock, maybe 15% more growly. High recommend for anyone wanting a LITTLE more than stock sound. $150 for a welder and welding helmet, and about $10 in bent sawsall blades. I'd recommend this though: - Cut open BOTH SIDES of the canister - get 10" long sawsall metal blades. That way you can not smash your fingers and hands and destroy a bunch of blades trying to cut out the center pipes. And, added bonus, you get to learn welding a little more if this is a first time or you.

User Name		Remember Me?
Password