|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
01-16-2021, 10:43 PM | #1 |
Software Hobbiest
Join Date: Aug 2019
Drives: 2015 FRS
Location: San Diego
Posts: 160
Thanks: 26
Thanked 19 Times in 15 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Wideband O2 Tuning
I have installed a wideband o2 sensor on the downpipe to the sbd500x turbo kit. Everything seems fine except for at 2800rpm to 3000rpm i get a weird resonance that i cant seem to figure out where its coming from.
https://datazap.me/u/dholloway543/we...zoom=1160-2425 The O2 #2 Voltage is my wideband. You can calculate the AFR on the sensor with this equation. AFR = 3.008 * Voltage + 7.35 I used excel to add the Fuel trim combined line and trimmed out the section that is bad. Any ideas on what might cause it would help out alot |
01-17-2021, 12:29 AM | #2 |
Software Hobbiest
Join Date: Aug 2019
Drives: 2015 FRS
Location: San Diego
Posts: 160
Thanks: 26
Thanked 19 Times in 15 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
After looking closer at it, it looks like the throttle pedal is reading the values like that. Is there a smoothing value in ecutek
|
01-17-2021, 02:57 AM | #3 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,196
Thanks: 500
Thanked 1,067 Times in 775 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
|
how did you connected it and where did you take the power for it and what did you do on the racerom tables to try make it working?
i have a wideband 24/7 in my headers and i get toatlly different signal in the o2 connector, it seems it isnt working racerom has everything to make the wideband afr viewable without conversions directly in log trhough the value "Wideband AFR" that was an old test while i was tuning everything , but you can see o2 voltage and Wideband afr https://datazap.me/u/tommbrz/io-v400...1&zoom=142-351 |
01-17-2021, 03:08 AM | #4 |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Maybe turn off the ecutek closed loop fueling till you get wideband sorted as its causing wild swings in afr due to the weird readings from the wideband i suspect.
also injector pulse widths dont seem to be logging which is strange. you can use pulsewidths to check if the afr reading is correct ie if you see more pulsewidths and afr going leaner its likely not correct. Also rescale the front 02 sensor you wont rearly needcthe wideband and the wideband should read failry similar to the front 02. |
01-17-2021, 03:23 PM | #5 |
Software Hobbiest
Join Date: Aug 2019
Drives: 2015 FRS
Location: San Diego
Posts: 160
Thanks: 26
Thanked 19 Times in 15 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
So you were right, The LC-2 defaults to a specific voltage before its calibrated. I found the link here
https://redirect.viglink.com/?format...C-2_Manual.pdf and now that its calibrated it spits out correct voltages |
The Following User Says Thank You to dholloway543 For This Useful Post: | steve99 (01-17-2021) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mann Engineering 2nd Quarter Tuning Days April 25th & 26th by Bill (Delicious Tuning) | DesertFrs | Northern California | 14 | 04-24-2014 03:15 AM |
Question about wideband and software tuning | post_break | Software Tuning | 5 | 04-08-2014 09:53 PM |
Delicious Tuning - Dyno Tuning Weekend at Mann Engineering's (San Jose, CA) | DeliciousTuning | Announcements, Contests, Giveaways | 6 | 09-19-2013 05:55 PM |
Visconti Tuning - Latest Forced Induction Tuning Info | Visconti | Forced Induction | 340 | 04-30-2013 06:33 PM |
Innovate Wideband Air/Fuel Ratio LC-1 Wideband Kit **Special Price** | Titanmotorsports | Audio/Visual, Electronics, Infotainment, NAV | 2 | 09-14-2012 12:42 PM |